Optimising piezoelectric and magnetoelectric responses on CoFe2O4/P(VDF-TrFE) nanocomposites

Magnetoelectric nanocomposite films composed of magnetostrictive CoFe2O4 nanoparticles with sizes between 35 and 55 nm embedded in P(VDF-TrFE) have been successfully prepared by a solvent casting method. The ferroelectric, piezoelectric, magnetic and magnetoelectric properties of the nanocomposite and their variation with the wt% of the ferrite filler, thickness of the composite and direction of the applied magnetic field have been investigated. Ferroelectric and piezoelectric properties are improved when small amount of ferrite nanoparticles were added to the polymeric matrix. Magnetic properties vary linearity with ferrite content. The highest magnetoelectric response of 41.3 mV/cmOe was found in the composite with 72wt% when a 2.5 kOe DC field was transversely applied to the sample surface. This value is among the highest reported in two phase particulate polymer nanocomposites. Thickness of the composite has no influence in the magnetoelectric response, allowing tailoring sensor thickness for specific applications. The good value of the magnetoelectric coefficient and the flexibility of the films make these composites suitable for applications in magnetoelectric smart devices.Fundação para a Ciência e a Tecnologia (FCT) (PTDC/CTM/69316/2006), (SFRH/BD/45265/2008).FEDER “Programa Operacional Factores de Competitividade – COMPETE” (NANO/NMed-SD/0156/2007)Basque Government Industry Department - Project Actimat (ETORTEK-IE10-272)COST Action MP1003, 2010 - The „European Scientific Network for Artificial Muscles‟ (ESNAM)

Mechanically driven alloying of immiscible elements (Comment)

In conclusion we have proven that the fact that both fcc FeCu and bcc Fe magnetization agree at 300 K is simply an accident and our data at low temperature show clearly that the Fe contribution after precipitation from the metastable phase has a deficiency in magnetization of at least 20% with respect to the Fe state in fcc FeCu metastable solid solution

Producción de látex híbridos acrílicos/alquídicos

In this work, the production of high solids content hybrid acrylic/alkyd latexes by miniemulsion polymerization is discussed. First, the miniemulsification procedure to achieve colloidally stable hybrid nanodroplets is presented. Next, the efficient nucleation of most nanodroplets during the polymerization, avoiding other nucleation mechanisms is presented. Finally, the key aspects to control the polymer architecture as well as the particle morphology are analyzed.Fil: Goikoetxea, Monika. Universidad del País Vasco; EspañaFil: Minari, Roque Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Beristain, Itxaso. Universidad del País Vasco; EspañaFil: Paulis, María. Universidad del País Vasco; EspañaFil: Asua, José M.. Universidad del País Vasco; EspañaFil: Barandiaran, María J.. Universidad del País Vasco; Españ

A Minimal Model of Metabolism Based Chemotaxis

Since the pioneering work by Julius Adler in the 1960's, bacterial chemotaxis has been predominantly studied as metabolism-independent. All available simulation models of bacterial chemotaxis endorse this assumption. Recent studies have shown, however, that many metabolism-dependent chemotactic patterns occur in bacteria. We hereby present the simplest artificial protocell model capable of performing metabolism-based chemotaxis. The model serves as a proof of concept to show how even the simplest metabolism can sustain chemotactic patterns of varying sophistication. It also reproduces a set of phenomena that have recently attracted attention on bacterial chemotaxis and provides insights about alternative mechanisms that could instantiate them. We conclude that relaxing the metabolism-independent assumption provides important theoretical advances, forces us to rethink some established pre-conceptions and may help us better understand unexplored and poorly understood aspects of bacterial chemotaxis

Magnetic behavior of metastable fcc Fe-Cu after thermal treatments

A ferromagnetic and supersaturated fcc Fe_51Cu_49 solid solution has been obtained by mechanical alloying. After subsequent thermal treatments the fcc phase undergoes a spinodal decomposition which finally, at 780 K, yields a mixture of fcc and bcc phases. In this work, a systematic magnetic study is carried out on samples at diferent decomposition states in order to determine the process of transformation into the stable phases. We observe a 20% maximum diminution on the magnetic moment with increasing temperatures of the thermal treatment. The Mössbauer spectrum taken at 8 K shows that 20% of the Fe atoms are in a nonferromagnetic state. On the other hand, upon heating up to 723 K the roomtemperature coercive field increases dramatically to 640 Oe, and after cooling down to 10 K it decreases to 270 Oe. Deviations from the T law in the temperature dependence of the magnetization have been observed. This behavior is explained by fluctuations in composition due to the spinodal decomposition, which lead to fluctuations of the magnetic order parameters, i.e., magnetic moment and Curie temperature

Nitrogenation and sintering of (Nd-Zr)Fe10Si2 tetragonal compounds for permanent magnets applications

International audienceNd(1-x)Zr(x)Fe10Si2 alloys have been prepared in the tetragonal ThMn12-type structure by arc-melting and melt-spinning and then nitrogenated to improve their magnetic properties. For x = 0.4 and 0.6 the Curie temperature and magnetic anisotropy fields increase from 280-300 ºC to about 390 ºC and from 2.8-3 T to 4.5-5 T respectively. The saturation magnetization remains almost unchanged. The nitrogenated powders were processed by spark plasma sintering (SPS) leading to compact pellets, which retain the full nitrogen content and magnetic properties up to 600 ºC, but segregated Fe-Si at elevated temperatures. Nitrogenation and SPS processing are, therefore, appropriate for sintering metastable materials such as (Nd,Zr)Fe10Si2 into compact material without loosing functional properties. This opens a way towards a new family of permanent magnets, lean of critical raw materials