30,185 research outputs found
Mode-matching analysis of a shielded rectangular dielectric-rod waveguide
Rectangular cross-section dielectric waveguides are widely used at millimeter wavelengths. In addition, shielded
dielectric resonators having a square cross-section are often used as filter elements, however there is almost no information available on the effect of the shield. Rectangular or square dielectric waveguide is notoriously difficult to analyze, because of the singular behaviour of the fields at the corners. Most published analyses are for materials with a low dielectric constant, and do not include the effects of a shield.
This paper describes a numerically efficient mode matching method for the analysis of shielded dielectric rod waveguide, which is applicable to both low and high dielectric constant materials. The effect of the shield on the propagation behaviour is studied. The shield dimensions
may be selected such that the shield has a negligible effect, so that results can be compared with free space data. The results are verified by comparison with several sets of published data, and have been confirmed by measurement for a nominal 'e' r of 37.4
Isostaticity in two dimensional pile of rigid disks
We study the static structure of piles made of polydisperse disks in the
rigid limit with and without friction using molecular dynamic simulations for
various elasticities of the disks and pile preparation procedures. The
coordination numbers are calculated to examine the isostaticity of the pile
structure. For the frictionless pile, it is demonstrated that the coordination
number converges to 4 in the rigid limit, which implies that the structure of
rigid disk pile is isostatic. On the other hand, for the frictional case with
the infinite friction constant, the coordination number depends on the
preparation procedure of the pile, but we find that the structure becomes very
close to isostatic with the coordination number close to 3 in the rigid limit
when the pile is formed through the process that tends to make a pile of random
configuration.Comment: 3 pages, 3 figures, Submitted to J. Phys. Soc. Jp
Incompatible sets of gradients and metastability
We give a mathematical analysis of a concept of metastability induced by
incompatibility. The physical setting is a single parent phase, just about to
undergo transformation to a product phase of lower energy density. Under
certain conditions of incompatibility of the energy wells of this energy
density, we show that the parent phase is metastable in a strong sense, namely
it is a local minimizer of the free energy in an neighbourhood of its
deformation. The reason behind this result is that, due to the incompatibility
of the energy wells, a small nucleus of the product phase is necessarily
accompanied by a stressed transition layer whose energetic cost exceeds the
energy lowering capacity of the nucleus. We define and characterize
incompatible sets of matrices, in terms of which the transition layer estimate
at the heart of the proof of metastability is expressed. Finally we discuss
connections with experiment and place this concept of metastability in the
wider context of recent theoretical and experimental research on metastability
and hysteresis.Comment: Archive for Rational Mechanics and Analysis, to appea
The design and development of transonic multistage compressors
The development of the transonic multistage compressor is reviewed. Changing trends in design and performance parameters are noted. These changes are related to advances in compressor aerodynamics, computational fluid mechanics and other enabling technologies. The parameters normally given to the designer and those that need to be established during the design process are identified. Criteria and procedures used in the selection of these parameters are presented. The selection of tip speed, aerodynamic loading, flowpath geometry, incidence and deviation angles, blade/vane geometry, blade/vane solidity, stage reaction, aerodynamic blockage, inlet flow per unit annulus area, stage/overall velocity ratio, and aerodynamic losses are considered. Trends in these parameters both spanwise and axially through the machine are highlighted. The effects of flow mixing and methods for accounting for the mixing in the design process are discussed
Joining of thirty three percent by weight random glass fibre reinforced polystyrene using variable frequency microwave
[Abstract]: This paper extends the range of applications for Variable Frequency Microwave (VFM) (2 – 18 GHz) facilities to joining thirty three percent by weight glass fibre reinforced polystyrene composite [PS/GF (33%)]. With a given power level, the composite was exposed to various exposure times to microwave irradiation. The primer or coupling agent used was 5-minute two-part adhesive containing 100% liquid epoxy and 8% amine, i.e. Araldite, which was more readily microwave reactive than the composite itself. Bond strengths of the joints were lap shear tested and results were compared with those obtained using fixed frequency (2.45 GHz) microwave processing. The VFMF was operated under software control, which provided automatic data logging facilities. The maximum lap shear bond strength of joint was 430 N/cm2 using variable frequency microwave facility while that obtained by fixed frequency microwave configuration was only 331 N/cm2. The former is nearly 30% stronger than the latter
Permittivity measurement of thermoplastic composites at elevated temperature
[Abstract]: The material properties of greatest importance in microwave processing of a dielectric are the complex relative permittivity Epsilon = Epsilon' - jEpsilon'', and the loss tangent, tan Delta = Epsilon'/Epsilon''. This paper describes two convenient laboratory based methods to obtain Epsilon', Epsilon'' and hence tan Delta of fibre-reinforced thermoplastic (FRTP) composites. One method employs a microwave network analyser in conjunction with a waveguide transmission technique, chosen because it provides the widest possible frequency range with high accuracy. The values of the dielectric constant and dielectric loss of glass fibre reinforced (33%) low density polyethylene, LDPE/GF (33%), polystyrene, PS/GF (33%), and Nylon 66/GF (33%), were obtained. Results are compared with those obtained by another method using a high-temperature dielectric probe
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Microwave processing of materials is a relatively new technology advancement alternative that provides new approaches for enhancing material properties as well as economic advantages through energy savings and accelerated product development. Factors that hinder the use of microwaves in materials processing are declining, so that prospect for the development of this technology seem to be very promising. The two mechanisms of orientation polarisation and interfacial space charge polarisation, together with dc conductivity, form the basis of high frequency heating. Clearly, advantages in utilising microwave technologies for processing materials include penetration radiation, controlled electric field distribution and selective and volumetric heating. However, the most commonly used facilities for microwave processing materials are of fixed frequency, e.g. 2.45 GHz. This paper presents a state-of-the-art review of microwave technologies, processing methods and industrial applications, using variable frequency microwave (VFM) facilities. This is a new alternative for microwave processing
- …