Development and validation of a hybrid-computer simulator for a transonic cryogenic wind tunnel

A study was undertaken to model the cryogenic wind tunnel process, to validate the model by the use of experimental data from the Langley 0.3 Meter Transonic Cryogenic Tunnel, and to construct an interactive simulator of the cryogenic tunnel using the validated model. Additionally, this model was used for designing closed loop feedback control laws for regulation of temperature and pressure in the 0.3 meter cryogenic tunnel. The global mathematical model of the cryogenic tunnel that were developed consists of coupled, nonlinear differential governing equations based on an energy state concept of the physical cryogenic phenomena. Process equations and comparisons between actual tunnel responses and computer simulation predictions were examined. Also included are the control laws and simulator responses obtained using the feedback schemes for closed loop control of temperature and pressure were also included

Evolution of 3D Boson Stars with Waveform Extraction

Numerical results from a study of boson stars under nonspherical perturbations using a fully general relativistic 3D code are presented together with the analysis of emitted gravitational radiation. We have constructed a simulation code suitable for the study of scalar fields in space-times of general symmetry by bringing together components for addressing the initial value problem, the full evolution system and the detection and analysis of gravitational waves. Within a series of numerical simulations, we explicitly extract the Zerilli and Newman-Penrose scalar $\Psi_4$ gravitational waveforms when the stars are subjected to different types of perturbations. Boson star systems have rapidly decaying nonradial quasinormal modes and thus the complete gravitational waveform could be extracted for all configurations studied. The gravitational waves emitted from stable, critical, and unstable boson star configurations are analyzed and the numerically observed quasinormal mode frequencies are compared with known linear perturbation results. The superposition of the high frequency nonspherical modes on the lower frequency spherical modes was observed in the metric oscillations when perturbations with radial and nonradial components were applied. The collapse of unstable boson stars to black holes was simulated. The apparent horizons were observed to be slightly nonspherical when initially detected and became spherical as the system evolved. The application of nonradial perturbations proportional to spherical harmonics is observed not to affect the collapse time. An unstable star subjected to a large perturbation was observed to migrate to a stable configuration.Comment: 26 pages, 12 figure

Generation of scalar-tensor gravity effects in equilibrium state boson stars

Boson stars in zero-, one-, and two-node equilibrium states are modeled numerically within the framework of Scalar-Tensor Gravity. The complex scalar field is taken to be both massive and self-interacting. Configurations are formed in the case of a linear gravitational scalar coupling (the Brans-Dicke case) and a quadratic coupling which has been used previously in a cosmological context. The coupling parameters and asymptotic value for the gravitational scalar field are chosen so that the known observational constraints on Scalar-Tensor Gravity are satisfied. It is found that the constraints are so restrictive that the field equations of General Relativity and Scalar-Tensor gravity yield virtually identical solutions. We then use catastrophe theory to determine the dynamically stable configurations. It is found that the maximum mass allowed for a stable state in Scalar-Tensor gravity in the present cosmological era is essentially unchanged from that of General Relativity. We also construct boson star configurations appropriate to earlier cosmological eras and find that the maximum mass for stable states is smaller than that predicted by General Relativity, and the more so for earlier eras. However, our results also show that if the cosmological era is early enough then only states with positive binding energy can be constructed.Comment: 20 pages, RevTeX, 11 figures, to appear in Class. Quantum Grav., comments added, refs update

Effects of Active Sting Damping on Common Research Model Data Quality

Recent tests using the Common Research Model (CRM) at the Langley National Transonic Facility (NTF) and the Ames 11-foot Transonic Wind Tunnel (11' TWT) produced large sets of data that have been used to examine the effects of active damping on transonic tunnel aerodynamic data quality. In particular, large statistically significant sets of repeat data demonstrate that the active damping system had no apparent effect on drag, lift and pitching moment repeatability during warm testing conditions, while simultaneously enabling aerodynamic data to be obtained post stall. A small set of cryogenic (high Reynolds number) repeat data was obtained at the NTF and again showed a negligible effect on data repeatability. However, due to a degradation of control power in the active damping system cryogenically, the ability to obtain test data post-stall was not achieved during cryogenic testing. Additionally, comparisons of data repeatability between NTF and 11-ft TWT CRM data led to further (warm) testing at the NTF which demonstrated that for a modest increase in data sampling time, a 2-3 factor improvement in drag, and pitching moment repeatability was readily achieved not related with the active damping system

Analysis of NASA Common Research Model Dynamic Data

Recent NASA Common Research Model (CRM) tests at the Langley National Transonic Facility (NTF) and Ames 11-foot Transonic Wind Tunnel (11-foot TWT) have generated an experimental database for CFD code validation. The database consists of force and moment, surface pressures and wideband wing-root dynamic strain/wing Kulite data from continuous sweep pitch polars. The dynamic data sets, acquired at 12,800 Hz sampling rate, are analyzed in this study to evaluate CRM wing buffet onset and potential CRM wing flow separation

Black Hole Boundary Conditions and Coordinate Conditions

This paper treats boundary conditions on black hole horizons for the full 3+1D Einstein equations. Following a number of authors, the apparent horizon is employed as the inner boundary on a space slice. It is emphasized that a further condition is necessary for the system to be well posed; the ``prescribed curvature conditions" are therefore proposed to complete the coordinate conditions at the black hole. These conditions lead to a system of two 2D elliptic differential equations on the inner boundary surface, which coexist nicely to the 3D equation for maximal slicing (or related slicing conditions). The overall 2D/3D system is argued to be well posed and globally well behaved. The importance of ``boundary conditions without boundary values" is emphasized. This paper is the first of a series. This revised version makes minor additions and corrections to the previous version.Comment: 13 pages LaTeX, revtex. No figure

Periodic boundary conditions for the simulation of 3D domain patterns in tetragonal ferroelectric material

Periodic domain patterns in tetragonal ferroelectrics are explored using a phase field model calibrated for barium titanate. In this context, we discuss the standard periodic boundary condition and introduce the concept of reverse periodic boundary conditions. Both concepts allow the assembly of cubic cells in accordance with mechanical and electrical conditions. However, application of the reverse periodic boundary condition is due to an increased size of the RVE and enforces more complex structures compared to the standard condition. This may be of particular interest for other multiphysics simulations. Additionally, we formulate mechanical side conditions with minimal spherical (hydrostatic) stress, or conditions with controlled average strain. It is found that in sufficiently small periodic cells, only a uniform single domain, or the simplest stripe domains constitute equilibrium states. However, once the periodic cells are of order 20 domain wall widths in size, more complex, 3-dimensional patterns emerge. Some of these patterns are known from prior studies, but we also identify other domain patterns with long, ribbon-like domains threaded through them and some vortex-like structures. Keywords: Periodic boundary conditions; RVE simulation; Tetragonal ferroelectrics; Polarization patterns; Polarization vortex; Multiphysics simulation