Probing the energy levels of perovskite solar cells via Kelvin probe and UV ambient pressure photoemission spectroscopy

This work was supported by the Engineering and Physical Sciences Research Council (grant codes EP/M506631/1, EP/ K015540/01, EP/K022237/1 and EP/M025330/1). IDWS and JTSI acknowledge Royal Society Wolfson research merit awards.The field of organo-lead halide perovskite solar cells has been rapidly growing since their discovery in 2009. State of the art devices are now achieving efficiencies comparable to much older technologies like silicon, while utilising simple manufacturing processes and starting materials. A key parameter to consider when optimising solar cell devices or when designing new materials is the position and effects of the energy levels in the materials. We present here a comprehensive study of the energy levels present in a common structure of perovskite solar cell using an advanced macroscopic Kelvin probe and UV air photoemission setup. By constructing a detailed map of the energy levels in the system we are able to predict the importance of each layer to the open circuit voltage of the solar cell, which we then back up through measurements of the surface photovoltage of the cell under white illumination. Our results demonstrate the effectiveness of air photoemission and Kelvin probe contact potential difference measurements as a method of identifying the factors contributing to the open circuit voltage in a solar cell, as well as being an excellent way of probing the physics of new materials.Publisher PDFPeer reviewe

Ab initio constrained crystal-chemical Rietveld refinement of Ca10(VxP1-xO4)6F2 apatites

Extraction of reliable bond distances and angles for Ca10(VxP1-xO4)6F2 apatites using standard Rietveld refinement with Cu K(alpha) X-ray powder data was significantly impaired by large imprecision for the O-atom coordinates. An initial attempt to apply crystal-chemical Rietveld refinements to the same compounds was partly successful, and exposed the problematic determination of two oxygen\u8211metal\u8211oxygen angles. Ab initio modeling with VASP in space groups P63/m, P21/m and Pm showed that both these angular parameters exhibited a linear dependence with the vanadium content. Stable crystal-chemical Rietveld refinements in agreement with quantum results were obtained by fixing these angles at the values from ab initio simulations. Residuals were comparable with the less precise standard refinements. The larger vanadium ion is accommodated primarily by uniform expansion and rotation of BO4 tetrahedra combined with a rotation of the Ca\u8211Ca\u8211Ca triangular units. It is proposed that the reduction of symmetry for the vanadium end-member is necessary to avoid considerable departures from formal valences at the AII and B sites in P63/m. The complementarity of quantum methods and structural analysis by powder diffraction in cases with problematic least-squares extraction of the crystal chemistry is discussed.Peer reviewed: YesNRC publication: Ye

Atomistic origins of high-performance in hybrid halide perovskite solar cells

The performance of organometallic perovskite solar cells has rapidly surpassed that of both conventional dye-sensitised and organic photovoltaics. High power conversion efficiency can be realised in both mesoporous and thin-film device architectures. We address the origin of this success in the context of the materials chemistry and physics of the bulk perovskite as described by electronic structure calculations. In addition to the basic optoelectronic properties essential for an efficient photovoltaic device (spectrally suitable band gap, high optical absorption, low carrier effective masses), the materials are structurally and compositionally flexible. As we show, hybrid perovskites exhibit spontaneous electric polarisation; we also suggest ways in which this can be tuned through judicious choice of the organic cation. The presence of ferroelectric domains will result in internal junctions that may aid separation of photoexcited electron and hole pairs, and reduction of recombination through segregation of charge carriers. The combination of high dielectric constant and low effective mass promotes both Wannier-Mott exciton separation and effective ionisation of donor and acceptor defects. The photoferroic effect could be exploited in nanostructured films to generate a higher open circuit voltage and may contribute to the current-voltage hysteresis observed in perovskite solar cells.Comment: 6 pages, 5 figure

Electronic and Geometric Structures of Rechargeable Lithium Manganese Sulfate Li2Mn(SO4)2 Cathode

Here, we report the use of Li2Mn(SO4)2 as a potential energy storage material and describe its route of synthesis and structural characterization over one electrochemical cycle. Li2Mn(SO4)2 is synthesized by ball milling of MnSO4·H2O and Li2SO4·H2O and characterized using a suite of techniques, in particular, ex situ X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy on the Mn and S K-edges to investigate the electronic and local geometry around the absorbing atoms. The prepared Li2Mn-(SO4)2 electrodes undergo electrochemical cycles to different potential points on the charge−discharge curve and are then extracted from the cells at these points for ex situ structural analysis. Analysis of X-ray absorption spectroscopy (both near and fine structure part of the data) data suggests that there are minimal changes to the oxidation state of Mn and S ions during charge−discharge cycles. However, X-ray photoelectron spectroscopy analysis suggests that there are changes in the oxidation state of Mn, which appears to be different from the conclusion drawn from X-ray absorption spectroscopy. This difference in results during cycling can thus be attributed to electrochemical reactions being dominant at the surface of the Li2Mn(SO4)2 particles rather than in the bulk

Dataset for Crystal chemistry and antibacterial properties of cupriferous hydroxyapatite

Copper-doped hydroxyapatite (HA) of nominal composition Ca10(PO4)6[Cux(OH)2-2xOx] (0.0 ≤ x ≤ 0.8) was prepared by solid-state and wet chemical processing to explore the impact of the synthesis route and mode of crystal chemical incorporation of copper on the antibacterial efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) strains. Apatites prepared by solid-state reaction showed unit cell volume dilation from 527.17 Å3 for copper-free HA to 533.31 Å3 for material of the putative composition Ca10(PO4)6[Cu0.8(OH)0.4O0.8] consistent with Cu+ insertion into the [001] hydroxyapatite channel. This was less pronounced (528.30 Å3 to 529.3 Å3) in the corresponding wet chemical synthesised products, suggesting less complete Cu tunnel incorporation and partial tenancy of Cu in place of calcium. X-ray absorption spectroscopy suggests fast quenching is necessary to prevent oxidation of Cu+ to Cu2+. Raman spectroscopy revealed an absorption band at 630 cm−1 characteristic of symmetric O-Cu+-O units tenanted in the apatite channel while solid-state 31P magic-angle-spinning nuclear magnetic resonance (MAS NMR) supported a vacancy-Cu+ substitution model within the apatite channel. The copper doping strategy increases antibacterial efficiency by 25% to 55% compared to undoped HA, with the finer particle sizes and greater specific surface areas of the wet chemical material demonstrating superior efficacy

Charge carrier localised in zero-dimensional (CH3NH3)3Bi2I9 clusters

A metal-organic hybrid perovskite (CH3NH3PbI3) with three-dimensional framework of metal-halide octahedra has been reported as a low-cost, solution-processable absorber for a thin-film solar cell with a power-conversion efficiency over 20%. Low-dimensional layered perovskites with metal halide slabs separated by the insulating organic layers are reported to show higher stability, but the efficiencies of the solar cells are limited by the confinement of excitons. In order to explore the confinement and transport of excitons in zero-dimensional metal–organic hybrid materials, a highly orientated film of (CH3NH3)3Bi2I9 with nanometre-sized core clusters of Bi2I93− surrounded by insulating CH3NH3+ was prepared via solution processing. The (CH3NH3)3Bi2I9 film shows highly anisotropic photoluminescence emission and excitation due to the large proportion of localised excitons coupled with delocalised excitons from intercluster energy transfer. The abrupt increase in photoluminescence quantum yield at excitation energy above twice band gap could indicate a quantum cutting due to the low dimensionality.Publisher PDFPeer reviewe

Importance of Spin-Orbit Coupling in Hybrid Organic/Inorganic Perovskites for Photovoltaic Applications

International audienceThree-dimensional (3D) hybrid perovskites CH3NH3PbX3 (X = Br, I) have recently been suggested as new key materials for dye-sensitized solar cells (DSSC) leading to a new class of hybrid semiconductor photovoltaic cells (HSPC). Thanks to density functional theory calculations, we show that the band gap of these compounds is dominated by a giant spin-orbit coupling (SOC) in the conduction-band (CB). At room temperature, direct and isotropic optical transitions are associated to a spin-orbit split-off band related to the triply degenerated CB of the cubic lattice without SOC. Due to the strong SOC, the electronic states involved in the optical absorption are only slightly perturbed by local distortions of the lattice. In addition, band offset calculations confirm that CH3NH3PbX3/TiO2 is a reference material for driving electrons toward the electrode in HSPC. Two-dimensional (2D) hybrids are also suggested to reach further flexibility for light conversion efficiency. Our study affords the basic concepts to reach the level of knowledge already attained for optoelectronic properties of conventional semiconductors

Space Charge at Nanoscale: Probing Injection and Dynamic Phenomena Under Dark/Light Configurations by Using KPFM and C-AFM

International audienc

The investigation and provenance of glass vessel fragments attributed to the tomb of Amenhotep II, KV35, Valley of the Kings

Four polychrome glass fragments, excavated from tomb KV35 in the Valley of the Kings, attributed to Amenhotep II, were analysed to further investigate the composition and provenance of early Late Bronze Age glasses. An additional fragment, EA64163, cited by the British Museum as being stylistically analogous to the fragments from KV35, although with a findspot simply recorded as "Thebes", was also analysed. LA-ICP-MS analysis was used to analyse multiple colours on the fragments to determine the major element composition, the colouring strategies and establish provenance using trace element analysis. The resulting data obtained was compared with four polychrome fragments of standard LBA Egyptian composition, excavated from the palace of Amenhotep III at Malkata, previously analysed by SEM-WDS. Analysis showed that the glasses excavated from KV35 are standard LBA glass of Egyptian composition and were most likely produced in Egypt in the 18th Dynasty. The fragment EA64163 is a low magnesia, low potash glass, comparable with Iron Age composition, therefore should be reconsidered as a later glass. The analysis of glasses, excavated from a reliable, early Egyptian context supports the proposition that glass technology for multiple colours was established in Egypt at least as early as 1400 BCE