Design of 1 :7 .645 scale LCA high speed air intake model

This report details the mechanical design aspects of the 1:7.645 scale LCA high speed air intake model. The model is intended to generate intake data in the transonic range 0.7 & 1.3 by Aeronautical Development Agency. The model has been designed for testing in the S2MA ONERA wind tunnel facilities. The 1:7.645 scale model is basically a composite model with metallic bulkheads/inserts and mainly consists of front fuselage, the wing, the canopy, interchangeable front duct modules, the rear portion of the CFRP duct, the main bulkhead, the heat exchanger duct, the sting, kulite rake, rear portion of the metallic duct including venturi, butterfly valve and diffuser. The kulite rake, the sting and the rear portion of the duct available with ONERA is made use of in the present model design. The steel bulkhead provides anchor support for the model in the tunnel through a flange mounted sting. The model has been designed to meet all the requirements of ONERA regarding model design and construction. For the design of the present model, the critical loads are scaled down from the load data of the 1:4.405 scale model. Structural analysis based on strength of materials approach has been carried out on the components of the model viz. forward fuselage, main bulkhead, air intake duct, and the splitter plate. FEN analysis has been carried out on the wing which is supposed to be the critical element of the model. The stress analysis shows that adequate margins of safety are available for all the components of the model

Correlation of Serum Insulin-Like Growth Factor-1 and Hand Wrist Radiographs as Skeletal Maturity Indicators: An ex-vivo Study

Introduction: Conventional Hand and Wrist radiographs, have certain drawbacks of exposing orthodontic patients to unnecessary radiation hazards and subjectivity to errors. Serum insulin-like growth factor 1 (IGF-1) levels have been reported to increase until the pubertal peak in literature. The present study aims to assess the relationship between serum IGF-1 and skeletal maturity indicators Materials and Methods: Lateral cephalograms of 60 patients were assigned SMI stage according to Fishman’s classification system. The serum IGF-1 levels of the patients were also evaluated. Correlation between the serum IGF-1 levels, age of the patient, and their SMI stage was analyzed. Results: Pearson's coefficient of correlation revealed a non-significant weak positive correlation (p=0.69; >0.05) between age and IGF-1 levels, and a non-significant weak negative correlation (p =0.52; >0.05) between SMI stages and IGF-1 levels. Results of the ANOVA test indicated that there was no significant difference between mean IGF-1 levels across the different age groups and eleven SMI groups. However, there was a significant difference noted in the mean IGF-1 levels and the restructured SMI categories and groups. Conclusion: The moderate correlation between age and serum IGF-1 fluctuations during puberty underscores the hormone's pivotal role in adolescent growth. This positions serum IGF-1 as a potentially specific and reliable marker for assessing mandibular growth modifications, offering a radiation-free alternative to conventional radiographic methods

Information Dynamics in Living Systems: Prokaryotes, Eukaryotes, and Cancer

BACKGROUND: Living systems use information and energy to maintain stable entropy while far from thermodynamic equilibrium. The underlying first principles have not been established. FINDINGS: We propose that stable entropy in living systems, in the absence of thermodynamic equilibrium, requires an information extremum (maximum or minimum), which is invariant to first order perturbations. Proliferation and death represent key feedback mechanisms that promote stability even in a non-equilibrium state. A system moves to low or high information depending on its energy status, as the benefit of information in maintaining and increasing order is balanced against its energy cost. Prokaryotes, which lack specialized energy-producing organelles (mitochondria), are energy-limited and constrained to an information minimum. Acquisition of mitochondria is viewed as a critical evolutionary step that, by allowing eukaryotes to achieve a sufficiently high energy state, permitted a phase transition to an information maximum. This state, in contrast to the prokaryote minima, allowed evolution of complex, multicellular organisms. A special case is a malignant cell, which is modeled as a phase transition from a maximum to minimum information state. The minimum leads to a predicted power-law governing the in situ growth that is confirmed by studies measuring growth of small breast cancers. CONCLUSIONS: We find living systems achieve a stable entropic state by maintaining an extreme level of information. The evolutionary divergence of prokaryotes and eukaryotes resulted from acquisition of specialized energy organelles that allowed transition from information minima to maxima, respectively. Carcinogenesis represents a reverse transition: of an information maximum to minimum. The progressive information loss is evident in accumulating mutations, disordered morphology, and functional decline characteristics of human cancers. The findings suggest energy restriction is a critical first step that triggers the genetic mutations that drive somatic evolution of the malignant phenotype

Heat and fluid flow in a scraped-surface heat exchanger containing a fluid with temperature-dependent viscosity

Scraped-surface heat exchangers (SSHEs) are extensively used in a wide variety of industrial settings where the continuous processing of fluids and fluid-like materials is involved. The steady non-isothermal flow of a Newtonian fluid with temperature-dependent viscosity in a narrow-gap SSHE when a constant temperature difference is imposed across the gap between the rotor and the stator is investigated. The mathematical model is formulated and the exact analytical solutions for the heat and fluid flow of a fluid with a general dependence of viscosity on temperature for a general blade shape are obtained. These solutions are then presented for the specific case of an exponential dependence of viscosity on temperature. Asymptotic methods are employed to investigate the behaviour of the solutions in several special limiting geometries and in the limits of weak and strong thermoviscosity. In particular, in the limit of strong thermoviscosity (i.e., strong heating or cooling and/or strong dependence of viscosity on temperature) the transverse and axial velocities become uniform in the bulk of the flow with boundary layers forming either just below the blade and just below the stationary upper wall or just above the blade and just above the moving lower wall. Results are presented for the most realistic case of a linear blade which illustrate the effect of varying the thermoviscosity of the fluid and the geometry of the SSHE on the flow

A Short Total Synthesis of (±)-Lycorane by a Sequential Intramolecular Acylal Cyclisation (IAC) and Intramolecular Heck Addition Reaction

An intramolecular acylal cyclisation (IAC) approach to the synthesis of a range of bicyclic heterocycles is reported. As an example of the utility of the IAC reaction, the methodology was applied in a protecting-group free five-step total synthesis of (±)-lycorane, incorporating a novel intramolecular Heck addition reaction to generate the pentacyclic core structure of the natural product in good yield

Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications

In the present work, Zn-HA composites were developed by powder metallurgy route targeted for bone implant applicaitons. Zn-HA powders with varying HA content (1, 2, and 4 wt.%) were ball milled for 1 hr and sintered to produce composite compacts. X-ray diffraction (XRD) studies were done for all the ball milled powders and sintered compacts. No impurities were observed in the ball milled powders. Microstructural observations revealed the formation of lamellar structure in the composites due to the plastic deformation of the Zn powders during ball milling. Grain size measurements revealed the decreased grain size with increase of addition of HA. Furthermore, aspect ratio (length to thickness ratio) of the grains was measured and found that the aspect ratio was also decreased with the increased HA content. Higher microhardness was measured for all the composites compared with pure Zn. However, composite with 1% has shown higher hardness compared with the remaining composites. Form the preliminary observations, it can be concluded that Zn-HA composites can be successfully produced with lamellar morphology by ball milling followed by sintering for biomedical applications with increased hardness

Patterns of mandibular invasion in oral squamous cell carcinoma of the mandibular region

BACKGROUND: Mandibular resections are routinely carried out for achieving a R0 resection for oral cancers. However, the need of mandibular resection to achieve this has always been questioned. The present study was carried out to define the pattern of mandibular involvement in carcinoma of the mandibular region. PATIENTS AND METHODS: A total of 25 consecutive patients who had undergone mandibular resection and were found to have mandibular invasion were studied in a prospective open fashion. After decalcification the specimens were serially sectioned at 1 cm interval to identify invasion of mandibular bone. Type of invasion, route of spread and host cell reactions were also recorded. RESULTS: The mandibular involvement was infiltrative in 14(56%) and erosive in 11(44%). It was cortical in 5(20%), marrow involvement was seen in 15(60%) while 5(20%) had spread through the inferior alveolar canal. Of the 25, 24(96%) lesions were located with in 1 cm of the mandible. CONCLUSION: The possibility of mandibular involvement is higher in patients where tumours are located with in 1 cm of the mandible. Involvement of mandible through the canal of inferior alveolar nerve in the present study was relatively high (20%). Therefore it is recommended that before a decision is taken to preserve the mandible it should be thoroughly screened for possible involvement

Truncated and Helix-Constrained Peptides with High Affinity and Specificity for the cFos Coiled-Coil of AP-1

Protein-based therapeutics feature large interacting surfaces. Protein folding endows structural stability to localised surface epitopes, imparting high affinity and target specificity upon interactions with binding partners. However, short synthetic peptides with sequences corresponding to such protein epitopes are unstructured in water and promiscuously bind to proteins with low affinity and specificity. Here we combine structural stability and target specificity of proteins, with low cost and rapid synthesis of small molecules, towards meeting the significant challenge of binding coiled coil proteins in transcriptional regulation. By iteratively truncating a Jun-based peptide from 37 to 22 residues, strategically incorporating i-->i+4 helix-inducing constraints, and positioning unnatural amino acids, we have produced short, water-stable, alpha-helical peptides that bind cFos. A three-dimensional NMR-derived structure for one peptide (24) confirmed a highly stable alpha-helix which was resistant to proteolytic degradation in serum. These short structured peptides are entropically pre-organized for binding with high affinity and specificity to cFos, a key component of the oncogenic transcriptional regulator Activator Protein-1 (AP-1). They competitively antagonized the cJun–cFos coiled-coil interaction. Truncating a Jun-based peptide from 37 to 22 residues decreased the binding enthalpy for cJun by ~9 kcal/mol, but this was compensated by increased conformational entropy (TDS ≤ 7.5 kcal/mol). This study demonstrates that rational design of short peptides constrained by alpha-helical cyclic pentapeptide modules is able to retain parental high helicity, as well as high affinity and specificity for cFos. These are important steps towards small antagonists of the cJun-cFos interaction that mediates gene transcription in cancer and inflammatory diseases

The Surgical Infection Society revised guidelines on the management of intra-abdominal infection

Background: Previous evidence-based guidelines on the management of intra-abdominal infection (IAI) were published by the Surgical Infection Society (SIS) in 1992, 2002, and 2010. At the time the most recent guideline was released, the plan was to update the guideline every five years to ensure the timeliness and appropriateness of the recommendations. Methods: Based on the previous guidelines, the task force outlined a number of topics related to the treatment of patients with IAI and then developed key questions on these various topics. All questions were approached using general and specific literature searches, focusing on articles and other information published since 2008. These publications and additional materials published before 2008 were reviewed by the task force as a whole or by individual subgroups as to relevance to individual questions. Recommendations were developed by a process of iterative consensus, with all task force members voting to accept or reject each recommendation. Grading was based on the GRADE (Grades of Recommendation Assessment, Development, and Evaluation) system; the quality of the evidence was graded as high, moderate, or weak, and the strength of the recommendation was graded as strong or weak. Review of the document was performed by members of the SIS who were not on the task force. After responses were made to all critiques, the document was approved as an official guideline of the SIS by the Executive Council. Results: This guideline summarizes the current recommendations developed by the task force on the treatment of patients who have IAI. Evidence-based recommendations have been made regarding risk assessment in individual patients; source control; the timing, selection, and duration of antimicrobial therapy; and suggested approaches to patients who fail initial therapy. Additional recommendations related to the treatment of pediatric patients with IAI have been included. Summary: The current recommendations of the SIS regarding the treatment of patients with IAI are provided in this guideline

Beyond the Binding Site: The Role of the β2 – β3 Loop and Extra-Domain Structures in PDZ Domains

A general paradigm to understand protein function is to look at properties of isolated well conserved domains, such as SH3 or PDZ domains. While common features of domain families are well understood, the role of subtle differences among members of these families is less clear. Here, molecular dynamics simulations indicate that the binding mechanism in PSD95-PDZ3 is critically regulated via interactions outside the canonical binding site, involving both the poorly conserved loop and an extra-domain helix. Using the CRIPT peptide as a prototypical ligand, our simulations suggest that a network of salt-bridges between the ligand and this loop is necessary for binding. These contacts interconvert between each other on a time scale of a few tens of nanoseconds, making them elusive to X-ray crystallography. The loop is stabilized by an extra-domain helix. The latter influences the global dynamics of the domain, considerably increasing binding affinity. We found that two key contacts between the helix and the domain, one involving the loop, provide an atomistic interpretation of the increased affinity. Our analysis indicates that both extra-domain segments and loosely conserved regions play critical roles in PDZ binding affinity and specificity