Microbe-surface interactions in biofouling and biocorrosion processes

The presence of microorganisms on material surfaces can have a profound effect on materials performance. Surface-associated microbial growth, i.e. a biofilm, is known to instigate biofouling. The presence of biofilms may promote interfacial physico-chemical reactions that are not favored under abiotic conditions. In the case of metallic materials, undesirable changes in material properties due to a biofilm (or a biofouling layer) are referred to as biocorrosion or microbially influenced corrosion (MIC). Biofouling and biocorrosion occur in aquatic and terrestrial habitats varying in nutrient content, temperature, pressure and pH. Interfacial chemistry in such systems reflects a wide variety of physiological activities carried out by diverse microbial populations thriving within biofilms. Biocorrosion can be viewed as a consequence of coupled biological and abiotic electron-transfer reactions, i.e. redox reactions of metals, enabled by microbial ecology. Microbially produced extracellular polymeric substances (EPS), which comprise different macromolecules, mediate initial cell adhesion to the material surface and constitute a biofilm matrix. Despite their unquestionable importance in biofilm development, the extent to which EPS contribute to biocorrosion is not well-understood. This review offers a current perspective on material/microbe interactions pertinent to biocorrosion and biofouling, with EPS as a focal point, while emphasizing the role atomic force spectroscopy and mass spectrometry techniques can play in elucidating such interactions. [Int Microbiol 2005; 8(3):157-168

Corrosion of carbon steel by bacteria from North Sea offshore seawater injection systems: Laboratory investigation

Influence of sulfidogenic bacteria, from a North Sea seawater injection system, on the corrosion of S235JR carbon steel was studied in a flow bioreactor; operating anaerobically for 100 days with either inoculated or filtrated seawater. Deposits formed on steel placed in reactors contained magnesium and calcium minerals plus iron sulfide. The dominant biofilm-forming organism was an anaerobic bacterium, genus Caminicella, known to produce hydrogen sulfide and carbon dioxide. Open Circuit Potentials (OCP) of steel in the reactors was, for nearly the entire test duration, in the range − 800 45), suggested pitting on steel samples within the inoculated environment. However, the actual degree of corrosion could neither be directly correlated with the electrochemical data and nor with the steel corrosion in the filtrated seawater environment. Further laboratory tests are thought to clarify the noticed apparent discrepancies

Metabolomic and high-throughput sequencing analysis—modern approach for the assessment of biodeterioration of materials from historic buildings

Preservation of cultural heritage is of paramount importance worldwide. Microbial colonization of construction materials, such as wood, brick, mortar and stone in historic buildings can lead to severe deterioration. The aim of the present study was to give modern insight into the phylogenetic diversity and activated metabolic pathways of microbial communities colonized historic objects located in the former Auschwitz II-Birkenau concentration and extermination camp in Oświęcim, Poland. For this purpose we combined molecular, microscopic and chemical methods. Selected specimens were examined using Field Emission Scanning Electron Microscopy (FESEM), metabolomic analysis and high-throughput Illumina sequencing. FESEM imaging revealed the presence of complex microbial communities comprising diatoms, fungi and bacteria, mainly cyanobacteria and actinobacteria, on sample surfaces. Microbial diversity of brick specimens appeared higher than that of the wood and was dominated by algae and cyanobacteria, while wood was mainly colonized by fungi. DNA sequences documented the presence of 15 bacterial phyla representing 99 genera including Halomonas, Halorhodospira, Salinisphaera, Salinibacterium, Rubrobacter, Streptomyces, Arthrobacter and 9 fungal classes represented by 113 genera including Cladosporium, Acremonium, Alternaria, Engyodontium, Penicillium, Rhizopus and Aureobasidium. Most of the identified sequences were characteristic of organisms implicated in deterioration of wood and brick. Metabolomic data indicated the activation of numerous metabolic pathways, including those regulating the production of primary and secondary metabolites, for example, metabolites associated with the production of antibiotics, organic acids and deterioration of organic compounds. The study demonstrated that a combination of electron microscopy imaging with metabolomic and genomic techniques allows to link the phylogenetic information and metabolic profiles of microbial communities and to shed new light on biodeterioration processes

Biofilm formation on metal surfaces

The development of biofilms on mild and stainless steel surfaces in pure and mixed batch cultures of the bacterial species Pseudomonas fluorescens and Desulfovibrio desulfuricans and the role of these biofilms in corrosion of steel has been investigated. Early events leading to the formation of biofilms have been elucidated by studying the attachment of bacterial cells to steel using epifluorescence microscopy. To identify the nature of the bacterial surface components involved in the initial adhesion to mild steel, lectins, their sugar inhibitors and saccharolytic and proteolytic enzymes have been employed. Polyclonal antibodies have been raised against bacterial lipopolysaccharides (LPS) and their influence on bacterial adhesion assessed. LPS have been analysed chemically by gas-chromatography (GC-FID) and gas chromatography-mass spectrometry (GC-MS) to determine their carbohydrate composition and fatty acid content. On the basis of the results obtained the involvement of glucose and N-acetylglucosamine, present in O-antigenic fractions of LPS, in the initial attachment of the two bacterial species to mild steel is suggested. Both types of carbohydrates are likely to be involved in early attachment of Pseudomonas to mild steel, whereas only a polymeric form of N-acetylglucosamine seems to participate in adhesion of Desulfovibrio. The subsequent biofilm development on steel surfaces and their accompanying corrosion has been monitored by scanning electron microscopy (SEM). SEM studies reveal very different patterns of bacterial biofilms on mild and stainless steel and show varied degrees of corrosion occurring on these surfaces. Thin and patchy Pseudomonas biofilms are accompanied by little corrosion whilst thick. more continuous, Desulfovibrio biofilms are associated with higher levels of corrosion. Energy dispersive X-ray analysis (BOAX) of corrosion products present on steel surfaces indicates ferrous sulphides as the major components in Desulfovibrio biofilms. The corrosion of steel in bacterial cultures has also been investigated by kinetic polarisation measurements. The results obtained from cathodic and anodic polarisation curves, combined with SEM and EDAX analyses confirm the SEM observation. Stainless steel is not subjected to any great degree of fouling or corrosion under the chosen experimental conditions. The EPS associated with biofilms and released into the liquid phase of the culture media (free EPS) has been characterised. Proteins and carbohydrates in these polymers are detected colorimenically and by SDS-gel electrophoresis. Uronic acids, found in biofilm-bound BPS. are not detected in free EPS. The GC-MS and GC-FIO analyses have aided in establishing types and quantities of neutral carbohydrates present in bacterial exopolymers and show that the neutral sugar composition of free and surface-associated BPS is not identical for a given bacterial culture. The biofilm-bound BPS are believed not to playa major role in corrosion of mild steel but to provide additional mechanisms in its facilitation. No correlation between levels of free BPS and corrosion of steel is found

Transfer of bacteria between stainless steel and chicken meat: A CLSM and DGGE study of biofilms

This study aimed to assess the interaction between bacteria and food processing surfaces using novel methods. Microbial cross contamination between stainless steel, a common food processing material, and raw chicken was studied using microbiological culture, specialized microscope and molecular techniques. Confocal laser scanning microscopy (CLSM) allowed the visualization of biofilms containing single or dual species of Escherichia coli O157:H7, Salmonella typhimurium, Bacillus cereus, Staphylococcus aureus and Pseudomonas aeruginosa, formed after 6 days’ incubation on stainless steel or 4h on raw chicken. The results provided information on intra-biofilm location and stratification of species within dual species biofilms. Top-to-bottom Z-stack images revealed that, on both materials, S. typhimurium and E. coli attached concurrently, the former in greater numbers. E. coli and B. cereus segregated on steel, E. coli more frequent near the metal surface, B. cereus almost the only species in outer layers. Few cells of S. aureus, found at all depths, were seen in the 2.9 µm thick biofilm on steel with E. coli. Greatest attachment was shown by P. aeruginosa, followed by S. typhimurium, E. coli and finally Gram positive species. Large amounts of EPS in P. aeruginosa biofilms made visualization difficult on both materials, but especially on chicken meat, a limitation of this technique. Nevertheless, CLSM was useful for determining time sequence of adhesion and species makeup of thin biofilms. The technique showed that five min contact between bacterially-contaminated chicken and sterile steel resulted in greatest transfer of P. aeruginosa, followed by S. typhimurium. This was confirmed using DGGE. Gram positive bacteria transferred poorly. A biofilm containing 2.3 × 105  cfu·cm−2 B. cereus on steel transferred an undetectable number of cells to chicken after 5 min contact. This species was unable to form biofilm on chicken when incubated for 4 h in growth medium. S. typhimurium and P.aeruginosas were most efficiently transferred from contaminated steel to raw chicken within 5 min contact, with 20–30% transfer from single species biofilms. All other species, and all cells in dual species biofilms, showed less than 2% transfer. CLSM and DGGE were shown to be useful techniques for the study of bacterial adhesion to stainless steel