Energy and environmental performances of small and innovative solar cooling systems

The development of renewable energy technologies is a critical tool for reducing climate change and the reliance on fossil fuels. However, renewable energy technologies cannot be considered totally clean because they require energy consumption and have environmental impacts that cannot be neglected during their life cycle. This paper presents the results of two researches related to the application of solar thermal system for building heating and cooling. It is focused on small and compact systems of two different typologies. An innovative compact Solar DEC system is analysed in terms of potential competitor of stand alone electrically driven HVAC systems. The performances of small absorption chillers coupled with low temperature solar collectors is investigated by the means of Life Cycle Assessment approach in order to highlight their environmental impacts also during manufacturing and end-of-life phases.Bajada New Energy, General Membrane, EcoGroup, Econetique, Energy Investment, JMV Vibro Blocks, Solar Engineering, Solar Solutionspeer-reviewe

NEW DEC OPEN CYCLE FOR AIR CONDITIONING BASED ON FIXED COOLED ADSORPTION BEDS AND WET HEAT EXCHANGERS

In this work, a new solar Desiccant Evaporative Cooling (DEC) concept is presented. In the proposed system, two fixed packed desiccant beds of silica gel, operating in a batch process, are used as an alternative solution to the common adsorption rotor for dehumidifying outside air. As well known, adsorption heat due to water condensation considerably reduces the dehumidification capacity of the desiccant material, causing inefficiencies in performance. The aim of the work is to overcome the mentioned intrinsic thermodynamic limit of the adsorption rotor technology. The proposed core component is a fin and tube heat exchanger, commonly used in several air conditioning applications, wherein the spaces between the fins are filled with silica gel grains. Therefore, the adsorption material is cooled through a water loop in connection with a cooling tower. An important feature of the system is the adsorption storage capacity, this is due to the high amount of desiccant material available. An indirect cooling process of the air is then realized by means of two wet evaporative heat exchangers connected in series, with continuous humidification of the secondary side. The thermodynamic cycle is first presented and simulation results are shown and discussed. Possible applications may concern compact roof-top units as well as common AHUs

Innovative Compact Solar Air Conditioner based on Fixed and Cooled Adsorption Beds and Wet Heat Exchangers

Abstract In this work, a new all-in-one compact solar air conditioner concept is presented. The system is mainly based on a new DEC process which utilises fixed and cooled adsorption beds operating in a batch process and two wet heat exchangers. The proposed innovative adsorption bed is a fin and tube heat exchanger commonly used in the air conditioning sector, wherein the spaces between the fins are filled with silica gel grains. The main feature of this component is to allow simultaneous dehumidification and cooling of air. Furthermore, since the component hosts a considerable amount of adsorption material, solar energy can be efficiently stored in the desiccant media in terms of accumulated adsorption capacity. This potential can be used when regeneration heat is not available, strongly reducing the need for thermal storage in the solar loop. The indirect evaporative cooling process, operated downstream to the dehumidification, is realized by two wet plate heat exchangers connected in series. The process can be operated at relatively low temperature, allowing supply air temperature to the room of about 20 °C. A prototype of the compact solar air conditioner specifically developed for residential application is presented. The main features of the system as well as the thermodynamic cycle are first described. Monitoring results are presented by means of most commonly used performance indicators showing several advantages which can be obtained using the proposed solution

Sustainable lighting design through the analysis of spatial and time non-uniformities in natural lighting with the metric of the information theory

The indoor visual comfort of subjects faced with indoor ambient lighting varies with the position of the subject and is not constant over time. Average performance indexes, such as the mean value of Daylight Factor and Daylight Autonomy, are commonly used to analyse lighting distribution. These indexes, however, don’t properly take into account either the spatial or the time distribution of values affecting the non-uniformity of environmental lighting. Indeed, these are limited to the definition of a mean value or to the assessment of time availability of daylighting. This paper examines spatial and temporal non-uniformities in indoor lighting as possible causes of discomfort for occupants. The goal is to propose and verify possible supplementary tools to integrate traditional methods of evaluating ambient indoor lighting Use of the entropy theory with a probabilistic approach can help to obtain more detailed information about the environment. The authors have developed a case study of several sample environments and have analysed the relationships between lighting parameters and typical indices of information theory. Results show that this approach could be a useful way for predicting possible indoor visual comfort issues and for developing a preliminary assessment to a sustainable building design

ADVANCED SOLAR ASSISTED DESICCANT AND EVAPORATIVE COOLING SYSTEM EQUIPPED WITH WET HEAT EXCHANGERS

This work concerns an innovative solar assisted desiccant and evaporative cooling (DEC) system for building air conditioning. In this system, air-to-air packaged wet heat exchangers are used to maximise the exploitation of the evaporative cooling potential associated with the exhaust air stream. The thermodynamic cycle is first theoretically described, and then an example of a real application is shown. The system presented is an experimental DEC system originally installed at the beginning of 2008 at the Solar Laboratory of the University of Palermo and recently modified and updated. These modifications have been implemented with the aim to foster some problems related to the conventional indirect evaporative process and to increase the overall performance of the process. Different energy performance figures, such as thermal and electrical COP, are presented and discussed. The obtained results are very positive, showing that DEC systems can benefit from the use of wet heat exchangers to efficiently cool the air stream after the adsorption process in the desiccant wheel without any change in moisture content

Energy performance evaluation of a demo solar desiccant cooling system with heat recovery for the regeneration of the adsorption material

Since July 2008, a Solar Desiccant Evaporative Cooling (DEC) system has been operating as a test plant at the solar laboratory of the Dipartimento di Energia (ex DREAM) of the University of Palermo. The system is composed of an air handling unit (AHU) designed for ventilation of the laboratory coupled with a radiant ceiling that provides most of the required sensible cooling/heating energy. Flat plate collectors deliver part of the regeneration heat of the desiccant wheel during the summertime and are used for space heating during the wintertime.The system was designed for high humidity loads because of the typical climate conditions at the site and the need to support a radiant ceiling for sensible cooling. A hybrid configuration was chosen that uses two auxiliary cooling coils fed by a conventional compression chiller. One coil is used for pre-dehumidification. The other coil controls the air temperature if the desired supply temperature cannot be reached through indirect evaporative cooling alone. A specific feature of the system is the use of the heat rejected by the chiller to preheat regeneration airflow.The plant was monitored continuously after installation and start up phases were completed. This paper presents instantaneous, daily and monthly energy performance indicators for five summer months and three winter months. Monthly results are also presented and elaborated upon according to a monitoring procedure developed in the framework of the International Energy Agency (IEA) Task 38 " Solar Air Conditioning and Refrigeration" of the Solar Heating and Cooling Programme. Seasonal performance indicators such as electric and thermal COP and primary energy savings for cooling and heating operation are presented. It was found that about half of the total cooling energy delivered by the AHU was covered by the DEC process. Primary energy savings in summer, in comparison to a conventional AHU, came up to nearly 50%.The recovery of the heat rejected by the refrigerator was found as a good solution, permitting to reduce solar collector area in the design phase.Finally, main issues arisen from plant monitoring and possible solutions to enhance its energy performances are discussed