Comparison of 20nm silver nanoparticles synthesized with and without a gold core: Structure, dissolution in cell culture media, and biological impact on macrophages

Widespread use of silver nanoparticles raises questions of environmental and biological impact. Many synthesis approaches are used to produce pure silver and silver-shell gold-core particles optimized for specific applications. Since both nanoparticles and silver dissolved from the particles may impact the biological response, it is important to understand the physicochemical characteristics along with the biological impact of nanoparticles produced by different processes. The authors have examined the structure, dissolution, and impact of particle exposure to macrophage cells of two 20 nm silver particles synthesized in different ways, which have different internal structures. The structures were examined by electron microscopy and dissolution measured in Rosewell Park Memorial Institute media with 10% fetal bovine serum. Cytotoxicity and oxidative stress were used to measure biological impact on RAW 264.7 macrophage cells. The particles were polycrystalline, but 20 nm particles grown on gold seed particles had smaller crystallite size with many high-energy grain boundaries and defects, and an apparent higher solubility than 20 nm pure silver particles. Greater oxidative stress and cytotoxicity were observed for 20 nm particles containing the Au core than for 20 nm pure silver particles. A simple dissolution model described the time variation of particle size and dissolved silver for particle loadings larger than 9 μg/ml for the 24-h period characteristic of many in-vitro studies

Tribological performance of graphite-like carbon films with varied thickness

Graphite-like carbon (GLC) films with different thickness were deposited on 316 L stainless steel using closed field unbalanced magnetron sputtering system to investigate the influence of film thickness on the microstructure, mechanical and tribological properties. The results showed that the surface of the deposited films exhibited granular-like morphology, and the sp2 content, surface roughness increase with the increase of film thickness, leading to the lower of hardness and higher of the internal stress. Both of the friction curves obtained by nano-tribological tests and fretting wear experiments revealed a three-stage evolution tendency with the same wear mechanism for the first two stages. The intermediate thick GLC film had the lowest specific wear rate, whilst the fretting fatigue life increased with film thickness

Early tissue and healing responses after maxillary sinus augmentation using horizontal platelet rich fibrin bone blocks.

BACKGROUND The effects of horizontal platelet-rich fibrin (H-PRF) bone block on the healing and immune response during sinus augmentation have not been fully investigated histologically at early time points. METHODS Eighteenth male New Zealand white rabbits underwent bilateral sinus augmentation and were divided into two groups: deproteinized bovine bone mineral (DBBM) alone and H-PRF + DBBM (H-PRF bone block) group. Maxilla samples were collected at 3, 7 and 14 days post sinus augmentation procedures and analyzed using histological staining for the number of inflammatory cells, new blood vessels and evidence for early osteoclast bone turnover/remodeling. Furthermore, the effects of H-PRF bone blocks on the migration of osteoblasts and THP-1 macrophages were evaluated using a Transwell assay in vitro. RESULTS A higher number of immune cells were found in the H-PRF bone block group at 3 and 7 days post-surgery when compared to the DBBM alone group,most notably in the regions close to the mucosal lining and bone plates. Furthermore, a significantly greater number of new blood vessel formations and early signs of osteoclast development were found in the H-PRF bone block group at 14 days. The in vitro transwell assay further confirmed that culture medium from H-PRF bone block markedly promote the migration of osteoblasts and THP-1 macrophages. CONCLUSIONS The findings from this study have shown that H-PRF bone block is capable of increasing early immune cell infiltration leading to the acceleration of neovascularization and speeding the process of bone metabolism in vivo following maxillary sinus grafting with DBBM

Double In Situ Approach for the Preparation of Polymer Nanocomposite with Multi-functionality

A novel one-step synthetic route, the double in situ approach, is used to produce both TiO2nanoparticles and polymer (PET), and simultaneously forming a nanocomposite with multi-functionality. The method uses the release of water during esterification to hydrolyze titanium (IV) butoxide (Ti(OBu)4) forming nano-TiO2in the polymerization vessel. This new approach is of general significance in the preparation of polymer nanocomposites, and will lead to a new route in the synthesis of multi-functional polymer nanocomposites

Review of recent progress in nanoscratch testing

Nanoscratch testing, as an important technique for the assessment of the mechanical failure behaviour and adhesion strength of ceramic coatings and a simulation tool of single asperity contact in tribological experiments, is increasingly becoming an established nanomechanical characterisation method. This paper reviews recent work in nanoscratch testing in different engineering applications including thin ceramic films, automotive organic coatings, chemical- mechanical polishing and biomaterials. In the main part of the paper, nanoscratch results from experiments performed using NanoTest systems fitted with tangential force sensors and spherical indenters as scratch probes are presented and discussed. The types of nanoscratch tests described include constant load nanoscratches, ramped load nanoscratch tests and multipass repetitive unidirectional constant load nanoscratch tests (nanowear). The results are discussed in terms of critical load sensitivity to intrinsic and extrinsic factors, impact of scan speed and loading rate, influence of probe radius and geometry, estimation of tip contact pressure, influence of surface roughness and film stress and thickness, and finally role of ploughing on friction evolution

Improved detection of synthetic lethal interactions in Drosophila cells using Variable Dose Analysis (VDA)

This is the author accepted manuscript. The final version is available from National Academy of Sciences via the DOI in this record.Synthetic sick or synthetic lethal (SS/L) screens are a powerful way to identify candidate drug targets to specifically kill tumor cells, but this approach generally suffers from low consistency between screens. We found that many SS/L interactions involve essential genes and are therefore detectable within a limited range of knockdown efficiency. Such interactions are often missed by overly efficient RNAi reagents. We therefore developed an assay that measures viability over a range of knockdown efficiency within a cell population. This method, called Variable Dose Analysis (VDA), is highly sensitive to viability phenotypes and reproducibly detects SS/L interactions. We applied the VDA method to search for SS/L interactions with TSC1 and TSC2, the two tumor suppressors underlying tuberous sclerosis complex (TSC), and generated a SS/L network for TSC. Using this network, we identified four Food and Drug Administration-approved drugs that selectively affect viability of TSC-deficient cells, representing promising candidates for repurposing to treat TSC-related tumors.This work was supported by NIH Grant P01CA120964; University of Pennsylvania Orphan Disease Program Grant MDBR-15-103-LAM; and Department of Defense Grant W81XWH-16-1-0127. N.P. is a Howard Hughes Medical Institute Investigator

Molecular evolution of glycoside hydrolase genes in the Western corn rootworm (Diabrotica virgifera virgifera).

Comparative StudyJournal ArticleResearch Support, Non-U.S. Gov'tCellulose is an important nutritional resource for a number of insect herbivores. Digestion of cellulose and other polysaccharides in plant-based diets requires several types of enzymes including a number of glycoside hydrolase (GH) families. In a previous study, we showed that a single GH45 gene is present in the midgut tissue of the western corn rootworm, Diabrotica virgifera virgifera (Coleoptera: Chrysomelidae). However, the presence of multiple enzymes was also suggested by the lack of a significant biological response when the expression of the gene was silenced by RNA interference. In order to clarify the repertoire of cellulose-degrading enzymes and related GH family proteins in D. v. virgifera, we performed next-generation sequencing and assembled transcriptomes from the tissue of three different developmental stages (eggs, neonates, and third instar larvae). Results of this study revealed the presence of seventy-eight genes that potentially encode GH enzymes belonging to eight families (GH45, GH48, GH28, GH16, GH31, GH27, GH5, and GH1). The numbers of GH45 and GH28 genes identified in D. v. virgifera are among the largest in insects where these genes have been identified. Three GH family genes (GH45, GH48, and GH28) are found almost exclusively in two coleopteran superfamilies (Chrysomeloidea and Curculionoidea) among insects, indicating the possibility of their acquisitions by horizontal gene transfer rather than simple vertical transmission from ancestral lineages of insects. Acquisition of GH genes by horizontal gene transfers and subsequent lineage-specific GH gene expansion appear to have played important roles for phytophagous beetles in specializing on particular groups of host plants and in the case of D. v. virgifera, its close association with maize.Consortium for Plant Biotechnology ResearchPioneer Hi-Bred Internationa

Unnatural amino acid analogues of membrane-active helical peptides with anti-mycobacterial activity and improved stability

Objectives The emergence of MDR-TB, coupled with shrinking antibiotic pipelines, has increased demands for new antimicrobials with novel mechanisms of action. Antimicrobial peptides have increasingly been explored as promising alternatives to antibiotics, but their inherent poor in vivo stability remains an impediment to their clinical utility. We therefore systematically evaluated unnatural amino acid-modified peptides to design analogues with enhanced anti-mycobacterial activities. Methods Anti-mycobacterial activities were evaluated in vitro and intracellularly against drug-susceptible and MDR isolates of Mycobacterium tuberculosis using MIC, killing efficacy and intracellular growth inhibition studies. Toxicity profiles were assessed against mammalian cells to verify cell selectivity. Anti-mycobacterial mechanisms were investigated using microfluidic live-cell imaging with time-lapse fluorescence microscopy and confocal laser-scanning microscopy. Results Unnatural amino acid incorporation was well tolerated without an appreciable effect on toxicity profiles and secondary conformations of the synthetic peptides. The modified peptides also withstood proteolytic digestion by trypsin. The all D-amino acid peptide, i(llkk)2i (II-D), displayed superior activity against all six mycobacterial strains tested, with a 4-fold increase in selectivity index as compared with the unmodified L-amino acid peptide in broth. II-D effectively reduced the intracellular bacterial burden of both drug-susceptible and MDR clinical isolates of M. tuberculosis after 4 days of treatment. Live-cell imaging studies demonstrated that II-D permeabilizes the mycobacterial membrane, while confocal microscopy revealed that II-D not only permeates the cell membrane, but also accumulates within the cytoplasm. Conclusions Unnatural amino acid modifications not only decreased the susceptibility of peptides to proteases, but also enhanced mycobacterial selectivity