Synthesis and properties of multiscale porosity TiC-SiC ceramics

A process combining the pyrolysis of a lignocellulosic structure and reactive gas treatments has been developed to prepare porous TiC-SiC ceramics for solar receivers. The natural micro-porosity of balsa was complemented by a high open macro-porosity by laser cutting a periodical arrangement of parallel channels. The lignocellulosic structure was first pyrolysed into carbon. This reactive carbon material was then converted into TiC by Reactive Chemical Vapor Deposition (RCVD) using TiCl4/H2. After controlling the absence of cracks due to volume changes, the TiC structure was finally infiltrated by the Chemical Vapor Infiltration (CVI) of SiC using CH3SiCl3/H2. The density, porous structure, elemental and phase compositions, oxidation behavior and crushing strength were assessed after pyrolysis, RCVD and CVI. The SiC CVI coating significantly improves the compressive strength, the oxidation resistance and the thermal properties. The SiC layer is no longer fully protective at high temperature but the mechanical properties remain reasonably high

Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition

Open porosity cellular SiC-based ceramics have a great potential for energy conversion, e.g. as solar receivers. In spite of their tolerance to damage, structural applications at high temperature remain limited due to high production costs or inappropriate properties. The objective of this work was to investigate an original route for the manufacturing of porous SiC ceramics based on 3D printing and chemical vapor infiltration/deposition (CVI/CVD). After binder jetting 3D-printing, the green α-SiC porous structures were reinforced by CVI/CVD of SiC using CH3SiCl3/H2. The multiscale structure of the SiC porous specimens was carefully examined as well as the elemental and phase content at the microscale. The oxidation and thermal shock resistance of the porous SiC structures and model specimens were also studied, as well as the thermal and mechanical properties. The pure and dense CVI/CVD-SiC coating considerably improves the mechanical strength, oxidation resistance and thermal diffusivity of the material

A detailed clinical and molecular survey of subjects with nonsyndromic USH2A retinopathy reveals an allelic hierarchy of disease-causing variants.

Defects in USH2A cause both isolated retinal disease and Usher syndrome (ie, retinal disease and deafness). To gain insights into isolated/nonsyndromic USH2A retinopathy, we screened USH2A in 186 probands with recessive retinal disease and no hearing complaint in childhood (discovery cohort) and in 84 probands with recessive retinal disease (replication cohort). Detailed phenotyping, including retinal imaging and audiological assessment, was performed in individuals with two likely disease-causing USH2A variants. Further genetic testing, including screening for a deep-intronic disease-causing variant and large deletions/duplications, was performed in those with one likely disease-causing change. Overall, 23 of 186 probands (discovery cohort) were found to harbour two likely disease-causing variants in USH2A. Some of these variants were predominantly associated with nonsyndromic retinal degeneration ('retinal disease-specific'); these included the common c.2276 G>T, p.(Cys759Phe) mutation and five additional variants: c.2802 T>G, p.(Cys934Trp); c.10073 G>A, p.(Cys3358Tyr); c.11156 G>A, p.(Arg3719His); c.12295-3 T>A; and c.12575 G>A, p.(Arg4192His). An allelic hierarchy was observed in the discovery cohort and confirmed in the replication cohort. In nonsyndromic USH2A disease, retinopathy was consistent with retinitis pigmentosa and the audiological phenotype was variable. USH2A retinopathy is a common cause of nonsyndromic recessive retinal degeneration and has a different mutational spectrum to that observed in Usher syndrome. The following model is proposed: the presence of at least one 'retinal disease-specific' USH2A allele in a patient with USH2A-related disease results in the preservation of normal hearing. Careful genotype-phenotype studies such as this will become increasingly important, especially now that high-throughput sequencing is widely used in the clinical setting.European Journal of Human Genetics advance online publication, 4 February 2015; doi:10.1038/ejhg.2014.283

Synthèse de matériaux alvéolaires base carbures par transformation d'architectures carbonées ou céramiques par RCVD/CVD : application aux récepteurs solaires volumiques

The aim is to design and create efficient cellular architectures for volumetric solar receivers used in the future thermodynamic power plants. Three strategies are considered for the creation of ceramic or carbon preforms: (i) the synthesis of biomorphic materials resulting from the cutting of balsa, (ii) the elaboration of ceramic structures by binder jetting and (iii) the replication of polymer structures made by 3D printing, using a carbon or ceramic precursor resin. In all cases, the green preforms are converted by pyrolysis to C or SiC and an infiltration step / SiC coating by CVD (Chemical Vapor Deposition) completes the manufacture of ceramic structures. An intermediate stage of RCVD (Reactive CVD) was implemented during the first strategy, in order to convert the microporous carbonaceous structure into TiC. The composition, the microstructure and the porous architecture of the ceramic structures were first characterized. The characteristics of the most relevant materials, considering the application as a solar receiver, were then examined. The thermomechanical properties and the oxidation resistance have thus been characterized in priority. Permeability and thermo-radiative properties, which are also two important factors for application, were also considered.L’objectif était de concevoir et réaliser des architectures alvéolaires performantes pour les récepteurs solaires volumétriques des futures centrales thermodynamiques. Trois stratégies différentes sont envisagées pour l’ébauche des préformes carbones ou céramiques : (i) la synthèse de matériaux biomorphiques issus de la découpe de balsa, (ii) l’élaboration de structures céramiques par projection de liant et (iii) la réplication de structures polymères réalisées par impression 3D, à l’aide d’une résine précurseur de carbone ou céramique. Dans tous les cas, les préformes crues sont converties par pyrolyse en C ou SiC et une étape d’infiltration/revêtement de SiC par CVD (Chemical Vapor Deposition) achève la fabrication des structures céramiques. Une étape intermédiaire de RCVD (Reactive CVD) a été mise en œuvre au cours de la première voie, afin de convertir la structure carbonée microporeuse en TiC. La composition, la microstructure et l’architecture poreuse des structures céramiques ont tout d’abord été caractérisées. Les caractéristiques des matériaux les plus pertinentes, compte tenu de l’application en tant qu’absorbeur solaire, ont ensuite été examinées. Les propriétés thermomécaniques et la résistance à l’oxydation ont ainsi été caractérisées en priorité. La perméabilité et les propriétés thermo-radiatives, qui sont également deux facteurs importants pour l’application, ont également été considérées

Synthesis of porous materials (carbide type) with carbon or ceramic substrates transformation by RCVD/CVD : applications for solar receivers

L’objectif était de concevoir et réaliser des architectures alvéolaires performantes pour les récepteurs solaires volumétriques des futures centrales thermodynamiques. Trois stratégies différentes sont envisagées pour l’ébauche des préformes carbones ou céramiques : (i) la synthèse de matériaux biomorphiques issus de la découpe de balsa, (ii) l’élaboration de structures céramiques par projection de liant et (iii) la réplication de structures polymères réalisées par impression 3D, à l’aide d’une résine précurseur de carbone ou céramique. Dans tous les cas, les préformes crues sont converties par pyrolyse en C ou SiC et une étape d’infiltration/revêtement de SiC par CVD (Chemical Vapor Deposition) achève la fabrication des structures céramiques. Une étape intermédiaire de RCVD (Reactive CVD) a été mise en œuvre au cours de la première voie, afin de convertir la structure carbonée microporeuse en TiC. La composition, la microstructure et l’architecture poreuse des structures céramiques ont tout d’abord été caractérisées. Les caractéristiques des matériaux les plus pertinentes, compte tenu de l’application en tant qu’absorbeur solaire, ont ensuite été examinées. Les propriétés thermomécaniques et la résistance à l’oxydation ont ainsi été caractérisées en priorité. La perméabilité et les propriétés thermo-radiatives, qui sont également deux facteurs importants pour l’application, ont également été considérées.The aim is to design and create efficient cellular architectures for volumetric solar receivers used in the future thermodynamic power plants. Three strategies are considered for the creation of ceramic or carbon preforms: (i) the synthesis of biomorphic materials resulting from the cutting of balsa, (ii) the elaboration of ceramic structures by binder jetting and (iii) the replication of polymer structures made by 3D printing, using a carbon or ceramic precursor resin. In all cases, the green preforms are converted by pyrolysis to C or SiC and an infiltration step / SiC coating by CVD (Chemical Vapor Deposition) completes the manufacture of ceramic structures. An intermediate stage of RCVD (Reactive CVD) was implemented during the first strategy, in order to convert the microporous carbonaceous structure into TiC. The composition, the microstructure and the porous architecture of the ceramic structures were first characterized. The characteristics of the most relevant materials, considering the application as a solar receiver, were then examined. The thermomechanical properties and the oxidation resistance have thus been characterized in priority. Permeability and thermo-radiative properties, which are also two important factors for application, were also considered

Synthesis of porous materials (carbide type) with carbon or ceramic substrates transformation by RCVD/CVD : applications for solar receivers

L’objectif était de concevoir et réaliser des architectures alvéolaires performantes pour les récepteurs solaires volumétriques des futures centrales thermodynamiques. Trois stratégies différentes sont envisagées pour l’ébauche des préformes carbones ou céramiques : (i) la synthèse de matériaux biomorphiques issus de la découpe de balsa, (ii) l’élaboration de structures céramiques par projection de liant et (iii) la réplication de structures polymères réalisées par impression 3D, à l’aide d’une résine précurseur de carbone ou céramique. Dans tous les cas, les préformes crues sont converties par pyrolyse en C ou SiC et une étape d’infiltration/revêtement de SiC par CVD (Chemical Vapor Deposition) achève la fabrication des structures céramiques. Une étape intermédiaire de RCVD (Reactive CVD) a été mise en œuvre au cours de la première voie, afin de convertir la structure carbonée microporeuse en TiC. La composition, la microstructure et l’architecture poreuse des structures céramiques ont tout d’abord été caractérisées. Les caractéristiques des matériaux les plus pertinentes, compte tenu de l’application en tant qu’absorbeur solaire, ont ensuite été examinées. Les propriétés thermomécaniques et la résistance à l’oxydation ont ainsi été caractérisées en priorité. La perméabilité et les propriétés thermo-radiatives, qui sont également deux facteurs importants pour l’application, ont également été considérées.The aim is to design and create efficient cellular architectures for volumetric solar receivers used in the future thermodynamic power plants. Three strategies are considered for the creation of ceramic or carbon preforms: (i) the synthesis of biomorphic materials resulting from the cutting of balsa, (ii) the elaboration of ceramic structures by binder jetting and (iii) the replication of polymer structures made by 3D printing, using a carbon or ceramic precursor resin. In all cases, the green preforms are converted by pyrolysis to C or SiC and an infiltration step / SiC coating by CVD (Chemical Vapor Deposition) completes the manufacture of ceramic structures. An intermediate stage of RCVD (Reactive CVD) was implemented during the first strategy, in order to convert the microporous carbonaceous structure into TiC. The composition, the microstructure and the porous architecture of the ceramic structures were first characterized. The characteristics of the most relevant materials, considering the application as a solar receiver, were then examined. The thermomechanical properties and the oxidation resistance have thus been characterized in priority. Permeability and thermo-radiative properties, which are also two important factors for application, were also considered

Structure and electronic structure evolution of P2-NaxCoO2 phases from X-ray diffraction and 23Na magic angle spinning nuclear magnetic resonance

P2-Na 0.70 CoO 2 is considered as a model material for positive electrode application in Na-ion batteries. In this paper, we report an in-depth study and characterization of P2-Na x CoO 2 system, in order to understand the material evolution from the point of view of structure at different scales and electronic properties upon charge up to high voltage (4.6 V). Using a combination of ex-situ and operando XRD and ex situ 23 Na MAS NMR we discuss the structural changes occurring due to the deintercalation of Na + ions from the interlayer slabs and the change in the electronic structure and magnetic properties. The XRD study allows discussing the general evolution in relation with previous works. The novelty lies here in the observation for the first time of an ordered phase for x=1/3 appearing between above 4.3 V followed by a disordering in the slabs stacking for higher voltages. The combination of the data obtained by the different techniques allowed the interpretation of the NMR shift and shape evolution versus the Na content. This study reveals a complex behavior due to the presence of localized and delocalized electrons whose relative proportions is changing versus Na content

Influence of the porosity of SiC on its optical properties and oxidation kinetics

International audienceCEA laboratory has developed an additive manufacturing technique with SiC powders and the material obtained need to be characterized. Therefore, we studied the change of optical properties and oxidation kinetics of SiC samples for the last step of the elaboration process. In this investigation, the optical properties and the oxidation kinetics of two SiC materials of two different densities and post-treated at LCTS laboratory have been compared. Their room-temperature optical properties were measured and both materials were oxidized using solar facilities at PROMES laboratory. It was observed that a higher porosity would increase both the solar absorptivity and total emissivity of the SiC. Nevertheless, the ratio is improved with the density, increasing from 1.04 to 1.22. The less dense SiC presents also a faster oxidation kinetics, the determined activation energy increasing from 110 to 270 kJ mol-1