Rapid optimization of chromatography operating conditions using a nano- liter scale column on a microfluidic chip with integrated pneumatic valves and optical sensors

Purification of monoclonal antibodies (mAbs) is traditionally achieved by chromatographic separations, which are very robust but require time-consuming optimization on a case-by-case, particularly if a non-affinity step is used. In this context, multimodal chromatography has been explored as a versatile and cost-effective alternative to the established affinity step employed for capturing mAbs. However, selective capture/polishing of a target mAb using such multimodal ligands comes with the need for extensive and time-consuming optimization, due to the multitude of interactions that can be simultaneously promoted in the ligand. In this work, we developed a novel microfluidic platform comprising multimodal chromatography beads inside micro-columns for rapid screening of operating conditions. Sequential liquid insertion in the device was achieved by using integrated pneumatic valves and the chromatographic assays were combined with a signal acquisition module for on-chip fluorescence measurements. Please click Additional Files below to see the full abstract

Effect of biofunctionalized implant surface on osseointegration: a histomorphometric study in dogs

Among the different properties that influence bone apposition around implants, the chemical or biochemical composition of implant surface may interfere on its acceptance by the surrounding bone. The aim of this study was to investigate if a biofunctionalization of implant surface influences the bone apposition in a dog model and to compare it with other surfaces, such as a microstructured created by the grit-blasting/acid-etching process. Eight young adult male mongrel dogs had the bilateral mandibular premolars extracted and each one received 6 implants after 12 weeks, totaling 48 implants in the experiment. Four groups of implants were formed with the same microrough topography with or without some kind of biofunctionalization treatment. After histomorphometric analysis, it was observed that the modified microstructured surface with a "low concentration of the bioactive peptide" provided a higher adjacent bone density (54.6%) when compared to the other groups (microstructured + HA coating = 46.0%, microstructured only = 45.3% and microstructured + "high concentration of the bioactive peptide" = 40.7%), but this difference was not statistically significant. In conclusion, biofunctionalization of the implant surface might interfere in the bone apposition around implants, especially in terms of bone density. Different concentrations of bioactive peptide lead to different results.Entre as diferentes propriedades de uma superfície capazes de influenciar a deposição óssea ao redor de implantes, a composição química e bioquímica pode atuar no reconhecimento do tecido ósseo circundante. O presente trabalho investigou a influência da biofuncionalização de superfícies de implante na deposição óssea ao redor dos mesmos em um modelo animal, comparando-as com outras superfícies, como a microtexturizada obtida pelo processo de jateamento e ataque ácido. Metodologicamente, os pré-molares mandibulares bilaterais de 8 cães foram extraídos e após 12 semanas foram instalados 6 implantes em cada cão, constituindo uma amostra de 48 implantes. Dos 4 grupos experimentais de diferentes superfícies, todos continham a mesma microtopografia rugosa, porém possuindo ou não alguma biofuncionalização. A análise histomorfométrica revelou que a superfície microtexturizada modificada pela adição de baixa concentração peptídica obteve uma maior densidade óssea adjacente (54,6%) quando comparada aos outros grupos (microtexturizada + HA = 46%, somente microtexturizada = 45,3% e microtexturizada com adição de alta concentração peptídica = 40,7%), no entanto estas diferenças numéricas não foram estatisticamente significantes. Dentro deste contexto, conclui-se que a biofuncionalização da superfície de implantes pode interferir na aposição óssea, em particular na densidade óssea, e que diferentes concentrações peptídicas podem conduzir a diferentes resultados.FAPES

L-Theanine promotes cultured human Sertoli cells proliferation and modulates glucose metabolism

L-Theanine is the major free amino acid present in tea (Camellia sinensis L.). The effects of several tea constituents on male reproduction have been investigated, but L-theanine has been overlooked. Sertoli cells (SCs) are essential for the physical and nutritional support of germ cells. In this study, we aimed to investigate the ability of L-theanine to modulate important mechanisms of human SCs (hSCs) metabolism, mitochondrial function and oxidative profile, which are essential to prevent or counteract spermatogenesis disruption in several health conditions.info:eu-repo/semantics/publishedVersio

Immobilization of L-asparaginase towards surface-modified carbon nanotubes

L-asparaginase (LA) is an enzyme that catalyzes L-asparagine hydrolysis into L-aspartic acid and ammonia and is mainly applied in pharmaceutical and food industries. The LA currently commercialized for pharmaceutical purposes is produced from two main bacterial sources: recombinant Escherichia coli and Erwinia chrysanthemi. However, some disadvantages are associated with its free form, such as the shorter half-life. Immobilization of LA has been proposed as an efficient approach to overcome this limitation. In this work, a straightforward method, including the functionalization of multi-walled carbon nanotubes (MWCNTs) through a hydrothermal oxidation treatment and the immobilization of LA by adsorption over pristine and modified MWCNTs was investigated. Different operation conditions, including pH, contact time, ASNase/MWCNT mass ratio, and the operational stability of the immobilized LA, were evaluated. The characterization of the LA-MWCNT bioconjugate was addressed using different techniques, namely Transmission Electron Microscopy (TEM), Thermogravimetric analysis (TGA), and Raman spectroscopy. Functionalized MWCNTs showed promising results, with an immobilization yield and a relative recovered activity of commercial LA above 95%, under the optimized adsorption conditions (pH 8, 60 min of contact, and 1.510–3 g.mL-1 of LA). The LA-MWCNT bioconjugate also showed improved enzyme operational stability (6 consecutive reaction cycles without activity loss), proving its suitability for application in industrial processes.publishe

Immobilization of L-asparaginase towards surface-modified carbon nanotubes

L-asparaginase (ASNase, EC 3.5.1.1) is an enzyme that catalyzes L-asparagine hydrolysis into L-aspartic acid and ammonia and is mainly applied in pharmaceutical and food industries [1]. The ASNase currently commercialized for pharmaceutical purposes is produced from two main bacterial sources: recombinant Escherichia coli and Erwinia chrysanthemi. However, some disadvantages are associated with its free form, such as the shorter half-life [2]. Immobilization of ASNase has been proposed as an efficient approach to overcome this limitation [3]. In this work, a straightforward method, including the functionalization of multi-walled carbon nanotubes (MWCNTs) through a hydrothermal oxidation treatment with nitric acid, and the immobilization of ASNase by adsorption over pristine and modified MWCNTs was investigated. Different operation conditions, including pH, contact time, ASNase/MWCNT mass ratio, and the operational stability of the immobilized ASNase were evaluated. The characterization of the ASNase-MWCNT bioconjugate was addressed using different techniques, namely Transmission Electron Microscopy (TEM), Thermogravimetric analysis (TGA), and Raman spectroscopy. Functionalized MWCNTs showed promising results, with an immobilization yield and a relative recovered activity of commercial ASNase above 95%, under the optimized adsorption conditions (pH 8, 60 min of contact and 1.5´10–3 g.mL-1of ASNase). The ASNase-MWCNT bioconjugate also showed improved enzyme operational stability (6 consecutive reaction cycles without activity loss), proving its suitability for application in industrial processes.publishe

Superior operational stability of immobilized L-asparaginase over surface-modified carbon nanotubes

L-asparaginase (ASNase, EC 3.5.1.1) is an enzyme that catalyzes the L-asparagine hydrolysis into L-aspartic acid and ammonia, being mainly applied in pharmaceutical and food industries. However, some disadvantages are associated with its free form, such as the ASNase short half-life, which may be overcome by enzyme immobilization. In this work, the immobilization of ASNase by adsorption over pristine and modified multi-walled carbon nanotubes (MWCNTs) was investigated, the latter corresponding to functionalized MWCNTs through a hydrothermal oxidation treatment. Different operating conditions, including pH, contact time and ASNase/MWCNT mass ratio, as well as the operational stability of the immobilized ASNase, were evaluated. For comparison purposes, data regarding the ASNase immobilization with pristine MWCNT was detailed. The characterization of the ASNase-MWCNT bioconjugate was addressed using different techniques, namely Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA) and Raman spectroscopy. Functionalized MWCNTs showed promising results, with an immobilization yield and a relative recovered activity of commercial ASNase above 95% under the optimized adsorption conditions (pH 8, 60 min of contact and 1.5 × 10-3 g mL-1 of ASNase). The ASNase-MWCNT bioconjugate also showed improved enzyme operational stability (6 consecutive reaction cycles without activity loss), paving the way for its use in industrial processes.publishe

Osteoblasts and Bone Marrow Mesenchymal Stromal Cells Control Hematopoietic Stem Cell Migration and Proliferation in 3D In Vitro Model

BACKGROUND: Migration, proliferation, and differentiation of hematopoietic stem cells (HSCs) are dependent upon a complex three-dimensional (3D) bone marrow microenvironment. Although osteoblasts control the HSC pool, the subendosteal niche is complex and its cellular composition and the role of each cell population in HSC fate have not been established. In vivo models are complex and involve subtle species-specific differences, while bidimensional cultures do not reflect the 3D tissue organization. The aim of this study was to investigate in vitro the role of human bone marrow-derived mesenchymal stromal cells (BMSC) and active osteoblasts in control of migration, lodgment, and proliferation of HSCs. METHODOLOGY/PRINCIPAL FINDINGS: A complex mixed multicellular spheroid in vitro model was developed with human BMSC, undifferentiated or induced for one week into osteoblasts. A clear limit between the two stromal cells was established, and deposition of extracellular matrix proteins fibronectin, collagens I and IV, laminin, and osteopontin was similar to the observed in vivo. Noninduced BMSC cultured as spheroid expressed higher levels of mRNA for the chemokine CXCL12, and the growth factors Wnt5a and Kit ligand. Cord blood and bone marrow CD34(+) cells moved in and out the spheroids, and some lodged at the interface of the two stromal cells. Myeloid colony-forming cells were maintained after seven days of coculture with mixed spheroids, and the frequency of cycling CD34(+) cells was decreased. CONCLUSIONS/SIGNIFICANCE: Undifferentiated and one-week osteo-induced BMSC self-assembled in a 3D spheroid and formed a microenvironment that is informative for hematopoietic progenitor cells, allowing their lodgment and controlling their proliferation

Determinants of the exclusive breastfeeding abandonment: psychosocial factors

OBJECTIVE To assess the determinants of exclusive breastfeeding abandonment. METHODS Longitudinal study based on a birth cohort in Viçosa, MG, Southeastern Brazil. In 2011/2012, 168 new mothers accessing the public health network were followed. Three interviews, at 30, 60, and 120 days postpartum, with the new mothers were conducted. Exclusive breastfeeding abandonment was analyzed in the first, second, and fourth months after childbirth. The Edinburgh Postnatal Depression Scale was applied to identify depressive symptoms in the first and second meetings, with a score of ≥ 12 considered as the cutoff point. Socioeconomic, demographic, and obstetric variables were investigated, along with emotional conditions and the new mothers’ social network during pregnancy and the postpartum period. RESULTS The prevalence of exclusive breastfeeding abandonment at 30, 60, and 120 days postpartum was 53.6% (n = 90), 47.6% (n = 80), and 69.6% (n = 117), respectively, and its incidence in the fourth month compared with the first was 48.7%. Depressive symptoms and traumatic delivery were associated with exclusive breastfeeding abandonment in the second month after childbirth. In the fourth month, the following variables were significant: lower maternal education levels, lack of homeownership, returning to work, not receiving guidance on breastfeeding in the postpartum period, mother’s negative reaction to the news of pregnancy, and not receiving assistance from their partners for infant care. CONCLUSIONS Psychosocial and sociodemographic factors were strong predictors of early exclusive breastfeeding abandonment. Therefore, it is necessary to identify and provide early treatment to nursing mothers with depressive symptoms, decreasing the associated morbidity and promoting greater duration of exclusive breastfeeding. Support from health professionals, as well as that received at home and at work, can assist in this process