1,019 research outputs found
Build-a-Body
Human anatomy students may be given a creative challenge in cooperative learning by asking them to Build-A-Body, using only their lab partners as sources for measurements. Allow them as much latitude as possible in design and construction. As a result, they will be more aware of the correct proportioning of the human body and will more fully appreciate the complexity inherent in the human form
Assessing the influence of the Merzbacher Lake outburst floods on discharge using the hydrological model SWIM in the Aksu headwaters, Kyrgyzstan/NW China
Glacial lake outburst floods (GLOF) often have a significant impact on downstream users. Including their effects in hydrological models, identifying past occurrences and assessing their potential impacts are challenges for hydrologists working in mountainous catchments. The regularly outbursting Merzbacher Lake is located in the headwaters of the Aksu River, the most important source of water discharge to the Tarim River, northwest China. Modelling its water resources and the evaluation of potential climate change impacts on river discharge are indispensable for projecting future water availability for the intensively cultivated river oases downstream of the Merzbacher Lake and along the Tarim River. The semi-distributed hydrological model SWIM was calibrated to the outlet station Xiehela on the Kumarik River, by discharge the largest tributary to the Aksu River. The glacial lake outburst floods add to the difficulties of modelling this high-mountain, heavily glaciated catchment with poor data coverage and quality. The aims of the study are to investigate the glacier lake outburst floods using a modelling tool. Results include a two-step model calibration of the Kumarik catchment, an approach for the identification of the outburst floods using the measured gauge data and the modelling results and estimations of the outburst flood volumes. Results show that a catchment model can inform GLOF investigations by providing ‘normal’ (i.e. without the outburst floods) catchment discharge. The comparison of the simulated and observed discharge proves the occurrence of GLOFs and highlights the influences of the GLOFs on the downstream water balance. © 2013 The Authors. Hydrological Processes Published by John Wiley & Sons Ltd
Observation of a temperature dependent electrical resistance minimum above the magnetic ordering temperature in GdPdSi
Results on electrical resistivity, magnetoresistance, magnetic Results on
electrical resistivity, magnetoresistance, magnetic susceptibility, heat
capacity and Gd Mossbauer measurements on a Gd-based intermetallic compound,
GdPdSi are reported. A finding of interest is that the resistivity
unexpectedly shows a well-defined minimum at about 45 K, well above the long
range magnetic ordering temperature (21 K), a feature which gets suppressed by
the application of a magnetic field. This observation in a Gd alloy presents an
interesting scenario. On the basis of our results, we propose electron
localization induced by s-f (or d-f) exchange interaction prior to long range
magnetic order as a mechanism for the electrical resistance minimum.Comment: 4 pages, 4 figure
Creative Cooperation through Competition
The competition includes a division for fourth through sixth grades and a division for seventh and eighth grades. Our district contains nine elementary schools and one junior high. With such a large district, we have over 400 contestants. The competition takes place in the afternoons of two school days, which releases teachers to help in supervision and allows students to be dismissed at the regular time. This helps ensure large attendance and avoids after-school transportation problems
Recommended from our members
Assessing the influence of the Merzbacher Lake outburst floods on discharge using the hydrological model SWIM in the Aksu headwaters, Kyrgyzstan/NW China
Glacial lake outburst floods (GLOF) often have a significant impact on downstream users. Including their effects in hydrological models, identifying past occurrences and assessing their potential impacts are challenges for hydrologists working in mountainous catchments. The regularly outbursting Merzbacher Lake is located in the headwaters of the Aksu River, the most important source of water discharge to the Tarim River, northwest China. Modelling its water resources and the evaluation of potential climate change impacts on river discharge are indispensable for projecting future water availability for the intensively cultivated river oases downstream of the Merzbacher Lake and along the Tarim River. The semi-distributed hydrological model SWIM was calibrated to the outlet station Xiehela on the Kumarik River, by discharge the largest tributary to the Aksu River. The glacial lake outburst floods add to the difficulties of modelling this high-mountain, heavily glaciated catchment with poor data coverage and quality. The aims of the study are to investigate the glacier lake outburst floods using a modelling tool. Results include a two-step model calibration of the Kumarik catchment, an approach for the identification of the outburst floods using the measured gauge data and the modelling results and estimations of the outburst flood volumes. Results show that a catchment model can inform GLOF investigations by providing 'normal' (i.e. without the outburst floods) catchment discharge. The comparison of the simulated and observed discharge proves the occurrence of GLOFs and highlights the influences of the GLOFs on the downstream water balance
Investigating the on-demand service characteristics:an empirical study
Purpose Technological developments and new customer expectations of immediacy have driven businesses to adopt on-demand service models. The purpose of this paper is to study the characteristics of a range of on-demand services in order to better understand the meaning of "on-demand" and its implications for service management. This enables the on-demand service logic to be applied to other service contexts, where it may add value for customers. Design/methodology/approach The study starts with a focused literature review and continues with a multiple case study methodology, as the on-demand service concept is in the early stages of theory development. Seven cases were studied, based on a maximum variation sampling strategy. Findings The results show that on-demand services are characterized by three interrelated characteristics: being highly available, responsive and scalable. Analysis further reveals that on-demand services display differences within the conceptual boundaries of these characteristics, i.e. they vary in terms of their availability, responsiveness and scalability. Originality/value Drawing on these findings, the study contributes to the service literature by being the first to specifically conceptualize and define the on-demand services concept and reveal three key characteristics that clarify the distinctive nature of this service type. Accordingly, on-demand services are clearly differentiated from other services. Additionally, the paper discusses the variety within on-demand services and develops an on-demand service continuum that gives detailed insights into the conceptual variations within such services
An assessment framework of business modelling ontologies to ensure the viability of business models
Organisations operate in an increasingly dynamic environment. Consequently, the business models span several organisations, dealing with multiple stakeholders and their competing interests. As a result, the enterprise information systems supporting this new market setting are highly distributed, and their components are owned and managed by different stakeholders. For successful businesses to exist it is crucial that their enterprise architectures are derived from and aligned with viable business models. Business model ontologies (BMOs) are effective tools for designing and evaluating business models. However, the viability perspective has been largely neglected. In this paper, current BMOs have been assessed on their capabilities to support the design and evaluation of viable business models. As such, a list of criteria is derived from literature to evaluate BMOs from a viability perspective. These criteria are subsequently applied to six well-established BMOs, to identify a BMO best suited for design and evaluation of viable business models. The analysis reveals that, although none of the BMOs satisfy all the criteria, e3-value is the most appropriate BMO for designing and evaluating business models from a viability perspective. Furthermore, the identified deficits provide clear areas for enhancing the assessed BMOs from a viability perspective
Towards the drivers of value creation in the biogas industry:enablers and inhibiters in the Netherlands
The Dutch biogas industry is developing slowly and in many instances still unviable. Insights in the drivers of value creation may help to create viable biogas business networks. This research explores these related drivers and accordingly, proposes a new and comprehensive definition of a driver of value creation. This definition focuses on the enabling and inhibiting factors of value creation in a business network and forms the backbone of three case studies. The results suggest the presence of four specific drivers as necessary for a viable biogas business network: stability and certainty, partner alignment, local opportunities and economies of scale
Harvesting anterior iliac crest or calvarial bone grafts to augment severely resorbed edentulous jaws:a systematic review and meta-analysis of patient-reported outcomes
The aim of this systematic review was to compare patient-reported outcomes after harvesting calvarial or anterior iliac crest bone grafts to repair severe jaw defects and enable implant placement. The MEDLINE, Embase, Cochrane Central Register of Controlled Trials databases, and OpenGrey were searched for studies on patient satisfaction, pain, disturbances in daily functioning, sensory alterations, donor site aesthetics, and complication rates. Of the 1946 articles identified, 43 reporting 40 studies fulfilled the inclusion criteria; the studies were one randomized controlled clinical trial, one retrospective controlled clinical trial, and 23 prospective and 15 retrospective cohort studies. A meta-analysis of two studies (74 patients) showed no difference in satisfaction (mean difference (MD) − 0.13, 95% confidence interval (CI) − 1.17 to 0.92; P = 0.813) or postoperative pain (directly postoperative: MD −2.32, 95% CI −5.20 to 0.55, P = 0.113; late postoperative: MD −0.01, 95% CI −0.14 to 0.11, P = 0.825) between donor sites. However, the level of evidence is limited, due to the retrospective, non-randomized design of one study. Postoperative gait disturbances were highly prevalent among the anterior iliac crest patients (28–100% after 1 week). The incidence rates of sensory disturbances and other complications were low, and the donor site aesthetic outcomes were favourable for both graft types. To conclude, harvesting bone grafts from the calvarium or anterior iliac crest to augment the severely resorbed edentulous jaw results in similar patient satisfaction. However, the findings for postoperative pain and disturbances in daily living suggest a trend in favour of calvarial bone grafts if harvested using an adjusted technique
- …