53,201 research outputs found

    Acoustical transducer calibrating system and apparatus

    Get PDF
    An acoustical transducer calibrating system includes a differential pressure actuating device having an inner chamber for applying differential pressures to the transducer, and an outer chamber for vacuum sealing. Mounted within the inner chamber is an electrostatic actuator for exciting the transducer at selected frequencies so that its sensitivity can be determined for different operating ambient pressures

    Apparatus ad method for quiescent containerless processing of high temperature metals and alloys in low gravity

    Get PDF
    The electron bombardment furnace consists of two confinement grid sections which may be moved and separated from each other. Inside the bombardment furnace, a tungsten element is enclosed. The material specimen is located within the tungsten element and grounded by means of grounded support wires connected to the respective sections of the furnace. The material specimen is supported on the ground wires and heated by electron bombardment until melt occurs. The furnace sections are separated in opposite directions causing the ground wires to pull from the surfaces of the specimen, leaving the specimen freely suspended in the process chamber without the action of external forces. The specimen remains in its melt condition in the processing chamber where it can be undercooled without external forces acting on the specimen, which would cause dynamic nucleation

    Isomorphism in expanding families of indistinguishable groups

    Full text link
    For every odd prime pp and every integer n≥12n\geq 12 there is a Heisenberg group of order p5n/4+O(1)p^{5n/4+O(1)} that has pn2/24+O(n)p^{n^2/24+O(n)} pairwise nonisomorphic quotients of order pnp^{n}. Yet, these quotients are virtually indistinguishable. They have isomorphic character tables, every conjugacy class of a non-central element has the same size, and every element has order at most pp. They are also directly and centrally indecomposable and of the same indecomposability type. The recognized portions of their automorphism groups are isomorphic, represented isomorphically on their abelianizations, and of small index in their full automorphism groups. Nevertheless, there is a polynomial-time algorithm to test for isomorphisms between these groups.Comment: 28 page

    Planetary camera control improves microfiche production

    Get PDF
    Microfiche is prepared using an automatic control system for a planetary camera. The system provides blank end-of-row exposures and signals card completion so the legend of the next card may by photographed

    Effect of time dependent flight loads on JT9D-7 performance deterioration

    Get PDF
    The results of a modal transient analysis of the engine/aircraft system are presented. The response of the JT9D to analytically simulated vertical gusts and landings was predicted using a NASTRAN finite element mathematical model of the JT9D/747 propulsion system. The NASTRAN finite element model of the propulsion system included engine structural models of the fan, low/high pressure compressors, diffuser/turbine cases, and high/low pressure rotors, as well as nacelle models of the inlet cowl, tailcone, and wing pylon. The analysis conducted predicts that an insignificant level of JT9D-7 performance deterioration would occur due to a typical vertical gust encounter or a typical revenue service landing. Analysis of a high sink rate landing with a heavy fuel load indicates the possibility of local wear, however, the lack of an accurate dynamic rotor/seal interference model precludes an accurate quantitative evaluation of performance change for this once-per-airframe-life event

    Wind tunnel measurements of surface pressure fluctuations at Mach numbers of 1.6, 2.0, and 2.5 using 12 different transducers

    Get PDF
    The turbulent boundary layer on the wall of a 9 by 7 foot wind tunnel was measured with 12 different transducers at Mach numbers of 1.6, 2.0, and 2.5. The results indicated that the wall surface-pressure-fluctuation field was more homogeneous at a Mach number of 2.5 than at Mach numbers of 1.6 or 2.0. A comparison of power-spectral-density data at Mach 2.5 with a summary of similar data (Mach 0.1 to 3.45) showed good agreement. The measurement uncertainty was greatest when frequencies were low and the surface-pressure-fluctuation field was homogeneous. The uncertainty at higher frequencies increased as the surface-pressure-fluctuation field became more inhomogeneous. Since transducer mounting effects and system noise levels were determined not to have contributed appreciably to measurement uncertainties, the result was attributed to an interaction between the surface-pressure-fluctuation field and the transducers. Corcos' correction for size effects improved the comparison between transducers at the high frequencies, but did not eliminate an apparent size effect at the lower frequencies

    Adopting national vegetation guidelines and the National Vegetation Information System (NVIS) framework in the Northern Territory

    Get PDF
    Guidelines and core attributes for site-based vegetation surveying and mapping developed for the Northern Territory, are relevant to botanical research, forestry typing, rangeland monitoring and reporting on the extent and condition of native and non-native vegetated landscapes. These initiatives are consistent with national vegetation guidelines and the National Vegetation Information System (NVIS) framework. This paper provides a synopsis of vegetation site data collection, classification and mapping in the Northern Territory, and discusses the benefits of consistency between the guidelines, core attributes and the NVIS framework; both of which has an emphasis on the NVIS hierarchical classification system for describing structural and floristic attributes of vegetation. The long-term aim of the NVIS framework is that national attributes are adopted at regional levels to enable comparability of vegetation information within survey and jurisdictional boundaries in the Northern Territory and across Australia. The guidelines and core attributes are incorporated in current and future vegetation survey and mapping programs in the Northern Territory

    Evaluation of remote sensing in control of pink bollworm in cotton

    Get PDF
    The author has identified the following significant results. This project is to identify and map cotton fields in the southern deserts of California. Cotton in the Imperial, Coachella, and Palo Verde Valleys is heavily infested by the pink bollworm which affects both the quantity and quality of cotton produced. In California the growing season of cotton is regulated by establishing planting and plowdown dates. These procedures ensure that the larvae, whose diapause or resting period occurs during the winter months, will have no plant material on which to feed, thus inhibiting spring moth emergence. the underflight data from the U-2 aircraft has shound that it is possible to detect the differences between a growing, a defoliated, and plowed down field providing the locations of the fields are known. The ERTS-1 MSS data are being analyzed using an I2S optical color combiner to determine which combinations of dates and colors will identify cotton fields and thus provide the data needed to produce maps of the fields for the forthcoming season
    • …
    corecore