5 research outputs found

    A novel XRF method to measure environmental release of copper and zinc from antifouling paints

    No full text
    The release of copper (Cu) and zinc (Zn) from vessels and leisure crafts coated with antifouling paints can pose a threat to water quality in semi-enclosed areas such as harbors and marinas as well as to coastal archipelagos. However, no reliable, practical and low-cost method exists to measure the direct release of metals from antifouling paints. Therefore, the paint industry and regulatory authorities are obliged to use release rate measurements derived from either mathematical models or from laboratory studies. To bridge this gap, we have developed a novel method using a handheld X-Ray Fluorescence spectrometer (XRF) to determine the cumulative release of Cu and Zn from antifouling paints. The results showed a strong linear relationship between XRF K? net intensities and metal concentrations, as determined by ICP-MS. The release of Cu and Zn were determined for coated panels exposed in harbors located in the Baltic Sea and in Kattegat. The field study showed salinity to have a strong impact on the release of Cu, i.e. the release increased with salinity. Contrary, the effect of salinity on Zn was not as evident. As exemplified in this work, the XRF method also makes it possible to identify the governing parameters to the release of Cu and Zn, e.g. salinity and type of paint formulation. Thus, the XRF method can be used to measure environmentally relevant releases of metallic compounds to design more efficient and optimized antifouling coatings. \ua9 2017 The Author

    A novel XRF method to measure environmental release of copper and zinc from antifouling paints

    Get PDF
    The release of copper (Cu) and zinc (Zn) from vessels and leisure crafts coated with antifouling paints can pose a threat to water quality in semi-enclosed areas such as harbors and marinas as well as to coastal archipelagos. However, no reliable, practical and low-cost method exists to measure the direct release of metals from antifouling paints. Therefore, the paint industry and regulatory authorities are obliged to use release rate measurements derived from either mathematical models or from laboratory studies. To bridge this gap, we have developed a novel method using a handheld X-Ray Fluorescence spectrometer (XRF) to determine the cumulative release of Cu and Zn from antifouling paints. The results showed a strong linear relationship between XRF K? net intensities and metal concentrations, as determined by ICP-MS. The release of Cu and Zn were determined for coated panels exposed in harbors located in the Baltic Sea and in Kattegat. The field study showed salinity to have a strong impact on the release of Cu, i.e. the release increased with salinity. Contrary, the effect of salinity on Zn was not as evident. As exemplified in this work, the XRF method also makes it possible to identify the governing parameters to the release of Cu and Zn, e.g. salinity and type of paint formulation. Thus, the XRF method can be used to measure environmentally relevant releases of metallic compounds to design more efficient and optimized antifouling coatings. \ua9 2017 The Author

    Optimus Pr\ue5m - Semi-submersible wind farm installation vessel for Blekinge Offshore

    No full text
    In Sweden the government is investing lots of resources in order to meet the energy need with clean and renewable alternatives. Since wind is an unlimited source of energy the exploitations of wind farms is of great interest. This report describes a conceptual design of an innovative offshore wind turbine installation vessel for inland sea conditions, with highest possible energy efficiency and environmental friendly performance in every detail. The customer, Blekinge Offshore, main requirement is to receive a concept with an as low installation cost as possible.The final concept Optimus Pr\ue5m includes one installation vessel, which is a semi-submersible barge, and one support vessel that supply the installation vessel with power and propulsion. The power is distributed from the support vessel to the installation vessel through a power cable. The installation vessel will be self-propelled during the installation phase using electrical motors and thrusters.The installation vessel shall be able to handle gravity foundations and fully assembled wind turbines, transported vertically to the installation site. Foundations and windmills will be fully assembled in Karlshamn port before transit to site. During transit the installation and support vessel are connected to each other in all motions except pitch. This almost total fixed connection makes the two vessels acts like one, which gives the joint vessel excellent manoeuvrability. When installing foundations, the installation vessel and the support vessel disconnect. The installation vessel places the foundation at the planned location by ballasting until the foundation has reached the seabed. After de-ballasting the installation vessel and support vessel connects again and transit back to the harbour. When installing wind turbines the two vessels are kept connected and makes highly accurate positioning for the installation possibl

    Daily dataset of 20th century surface air temperature and precipitation series for the European Climate Assessment

    No full text
    We present a dataset of daily resolution climatic time series that has been compiled for the European Climate Assessment (ECA). As of December 2001, this ECA dataset comprises 199 series of minimum, maximum and/or daily mean temperature and 195 series of daily precipitation amount observed at meteorological stations in Europe and the Middle East. Almost all series cover the standard normal period 1961-90, and about 50% extends back to at least 1925. Part of the dataset (90%) is made available for climate research on CDROM and through the Internet (at http://www.knmi.nl/samenw/eca). A comparison of the ECA dataset with existing gridded datasets, having monthly resolution, shows that correlation coefficients between ECA stations and nearest land grid boxes between 1946 and 1999 are higher than 0.8 for 93% of the temperature series and for 51% of the precipitation series. The overall trends in the ECA dataset are of comparable magnitude to those in the gridded datasets. The potential of the ECA dataset for climate studies is demonstrated in two examples. In the first example, it is shown that the winter (October-March) warming in Europe in the 1976-99 period is accompanied by a positive trend in the number of warm-spell days at most stations, but not by a negative trend in the number of cold-spell days. Instead, the number of cold-spell days increases over Europe

    Are hospitalized or ambulatory patients with heart failure treated in accordance with European Society of Cardiology guidelines? Evidence from 12 440 patients of the ESC Heart Failure Long-Term Registry.

    No full text
    AIMS: To evaluate how recommendations of European guidelines regarding pharmacological and non-pharmacological treatments for heart failure (HF) are adopted in clinical practice. METHODS AND RESULTS: The ESC-HF Long-Term Registry is a prospective, observational study conducted in 211 Cardiology Centres of 21 European and Mediterranean countries, members of the European Society of Cardiology (ESC). From May 2011 to April 2013, a total of 12 440 patients were enrolled, 40.5% with acute HF and 59.5% with chronic HF. Intravenous treatments for acute HF were heterogeneously administered, irrespective of guideline recommendations. In chronic HF, with reduced EF, renin-angiotensin system (RAS) blockers, beta-blockers, and mineralocorticoid antagonists (MRAs) were used in 92.2, 92.7, and 67.0% of patients, respectively. When reasons for non-adherence were considered, the real rate of undertreatment accounted for 3.2, 2.3, and 5.4% of the cases, respectively. About 30% of patients received the target dosage of these drugs, but a documented reason for not achieving the target dosage was reported in almost two-thirds of them. The more relevant reasons for non-implantation of a device, when clinically indicated, were related to doctor uncertainties on the indication, patient refusal, or logistical/cost issues. CONCLUSION: This pan-European registry shows that, while in patients with acute HF, a large heterogeneity of treatments exists, drug treatment of chronic HF can be considered largely adherent to recommendations of current guidelines, when the reasons for non-adherence are taken into account. Observations regarding the real possibility to adhere fully to current guidelines in daily clinical practice should be seriously considered when clinical practice guidelines have to be written
    corecore