Minimal field requirement in precessional magnetization switching

We investigate the minimal field strength in precessional magnetization switching using the Landau-Lifshitz-Gilbert equation in under-critically damped systems. It is shown that precessional switching occurs when localized trajectories in phase space become unlocalized upon application of field pulses. By studying the evolution of the phase space, we obtain the analytical expression of the critical switching field in the limit of small damping for a magnetic object with biaxial anisotropy. We also calculate the switching times for the zero damping situation. We show that applying field along the medium axis is good for both small field and fast switching times.Comment: 6 pages, 7 figure

Anisotropic magnetoresistance in antiferromagnetic Sr2IrO4

We report point-contact measurements of anisotropic magnetoresistance (AMR) in a single crystal of antiferromagnetic (AFM) Mott insulator Sr2IrO4. The point-contact technique is used here as a local probe of magnetotransport properties on the nanoscale. The measurements at liquid nitrogen temperature revealed negative magnetoresistances (MRs) (up to 28%) for modest magnetic fields (250 mT) applied within the IrO2 a-b plane and electric currents flowing perpendicular to the plane. The angular dependence of MR shows a crossover from four-fold to two-fold symmetry in response to an increasing magnetic field with angular variations in resistance from 1-14%. We tentatively attribute the four-fold symmetry to the crystalline component of AMR and the field-induced transition to the effects of applied field on the canting of AFM-coupled moments in Sr2IrO4. The observed AMR is very large compared to the crystalline AMRs in 3d transition metal alloys/oxides (0.1-0.5%) and can be associated with the large spin-orbit interactions in this 5d oxide while the transition provides evidence of correlations between electronic transport, magnetic order and orbital states. The finding of this work opens an entirely new avenue to not only gain a new insight into physics associated with spin-orbit coupling but also better harness the power of spintronics in a more technically favorable fashion.Comment: 13 pages, 3 figure

Exploring the energy landscape of resistive switching in antiferromagnetic Sr(3)Ir(2)O(7)

We study the resistive switching triggered by an applied electrical bias in antiferromagnetic Mott insulator Sr(3)Ir(2)O(7). The switching was previously associated with an electric-field driven structural transition. Here we use time-resolved measurements of the switching to probe the energy barrier associated with the transition. We quantify the changes in the energy barrier height with respect to the applied bias and find a linear decrease of the barrier with increasing bias. Our observations support the potential of antiferromagnetic transition metal oxides for spintronic applications.Comment: 9 pages, 4 figure

Spin separation in cyclotron motion

Charged carriers with different spin states are spatially separated in a two-dimensional hole gas. Due to strong spin-orbit interaction holes at the Fermi energy have different momenta for two possible spin states travelling in the same direction and, correspondingly, different cyclotron orbits in a weak magnetic field. Two point contacts, acting as a monochromatic source of ballistic holes and a narrow detector in the magnetic focusing geometry are demonstrated to work as a tunable spin filter.Comment: 4 pages, 2 figure

Current-Driven Magnetization Dynamics in Magnetic Multilayers

We develop a quantum analog of the classical spin-torque model for current-driven magnetic dynamics. The current-driven magnetic excitation at finite field becomes significantly incoherent. This excitation is described by an effective magnetic temperature rather than a coherent precession as in the spin-torque model. However, both the spin-torque and effective temperature approximations give qualitatively similar switching diagrams in the current-field coordinates, showing the need for detailed experiments to establish the proper physical model for current-driven dynamics.Comment: 5 pages, 2 figure

Magnetic relaxation in metallic films: Single and multilayer structures

The intrinsic magnetic relaxations in metallic films will be discussed. It will be shown that the intrinsic damping mechanism in metals is caused by incoherent scattering of itinerant electron-hole pair excitations by phonons and magnons. Berger [L. Berger, Phys. Rev. B 54, 9353 (1996)] showed that the interaction between spin waves and itinerant electrons in multilayers can lead to interface Gilbert damping. Ferromagnetic resonance (FMR) studies were carried out using magnetic single and double layer films. The FMR linewidth of the Fe films in the double layer structures was found to always be larger than the FMR linewidth measured for the single Fe films having the same thickness. The increase in the FMR linewidth scaled inversely with the film thickness, and was found to be linearly dependent on the microwave frequency. These results are in agreement with Berger's predictions. (C) 2002 American Institute of Physics

Electron focusing, mode spectroscopy and mass enhancement in small GaAs/AlGaAs rings

A new electron focusing effect has been discovered in small single and coupled GaAs/AlGaAs rings. The focusing in the single ring is attributed solely to internal orbits. The focusing effect allows the ring to be used as a small mass spectrometer. The focusing causes peaks in the magnetoresistance at low fields, and the peak positions were used to study the dispersion relation of the one-dimensional magnetoelectric subbands. The electron effective mass increases with the applied magnetic field by a factor of $50$, at a magnetic field of $0.5T$. This is the first time this increase has been measured directly. General agreement obtains between the experiment and the subband calculations for straight channels.Comment: 13 pages figures are available by reques

Microwave Oscillations of a Nanomagnet Driven by a Spin-Polarized Current

We describe direct electrical measurements of microwave-frequency dynamics in individual nanomagnets that are driven by spin transfer from a DC spin-polarized current. We map out the dynamical stability diagram as a function of current and magnetic field, and we show that spin transfer can produce several different types of magnetic excitations, including small-angle precession, a more complicated large-angle motion, and a high-current state that generates little microwave signal. The large-angle mode can produce a significant emission of microwave energy, as large as 40 times the Johnson-noise background.Comment: 12 pages, 3 figure

Incentivizing research into the effectiveness of medical devices

Introduction Medical devices (MDs) often obtain market authorization with much less clinical evidence than other health technologies, especially pharmaceuticals. This is due to a number of reasons. First, in contrast to pharmaceuticals, there is no legal requirement to conduct adequately controlled clinical studies, other than for ‘high-risk’ devices in some jurisdictions. In the US for example, high-risk devices and innovative lower-risk devices are required to demonstrate ‘reasonable assurance of safety and effectiveness’, which may imply clinical evidence based on randomized studies in many instances. In contrast, in the EU the requirement is to demonstrate adequate performance and safety, which can often be achieved by conducting observational studies such as registries [1, 2]. Secondly, the devices industry comprises many small and medium-size enterprises (SMEs), which would find the cost of conducting clinical studies, especially randomized controlled trials, prohibitive. However, although some larger manufacturers do undertake clinical studies of some of their products, manufacturers with similar products (called ‘fast-followers’) can often claim ‘substantial equivalence’ to a product that already has market authorization, thus avoiding the need to conduct costly and timeconsuming clinical studies. Since regulatory agencies often accept these claims of equivalence, for example under the 510(k) process in the US [3], this further reduces the incentives for manufacturers to conduct expensive clinical studies. Therefore, although device manufacturers have patent protection, they are often not granted data exclusivity in the same way as pharmaceutical manufacturers. Finally, unlike pharmaceuticals, devices are often modified once on the market, meaning that even if clinical evidence was available for the original version of the product, it may not necessarily be available for the version currently being marketed. For example in the US, one analysis showed that for 77 original market authorization applications for cardiac implantable electronic devices (e.g., pacemakers, implantable cardioverter-defibrillators) since 1979, the FDA approved 5829 ‘supplements’ reflecting product modifications in the period up until 2012. Of course, many of these product modifications were minor and unlikely to affect the performance of the device, but 37 % involved a change to the device’s design. In the vast majority of these cases the FDA deemed that new clinical data were not necessary for approval [4]. The lack of clinical evidence prior to product launch, especially evidence of comparative effectiveness, limits the possibilities for health technology assessment [2]. However, it should be remembered that clinical evidence can be gathered both pre-market (i.e., through conducting controlled clinical trials in an experimental setting), and postmarket, through clinical studies undertaken in regular clinical practice. Post-market effectiveness research may be more important for MDs than pharmaceuticals, as the performance of the device often depends on the interaction with the user (the so-called learning curve) [5]. This suggests that solutions to the problem of inadequate clinical evidence should address the issue of conducting clinical research in both the pre- and post-market phase. In this editorial we consider ways in which MD manufacturers could be incentivized to produce more clinical evidence to facilitate health technology assessments, including economic evaluations

Field dependence of magnetization reversal by spin transfer

We analyse the effect of the applied field (Happl) on the current-driven magnetization reversal in pillar-shaped Co/Cu/Co trilayers, where we observe two different types of transition between the parallel (P) and antiparallel (AP) magnetic configurations of the Co layers. If Happl is weaker than a rather small threshold value, the transitions between P and AP are irreversible and relatively sharp. For Happl exceding the threshold value, the same transitions are progressive and reversible. We show that the criteria for the stability of the P and AP states and the experimentally observed behavior can be precisely accounted for by introducing the current-induced torque of the spin transfer models in a Landau-Lifschitz-Gilbert equation. This approach also provides a good description for the field dependence of the critical currents