On testing global optimization algorithms for space trajectory design

In this paper we discuss the procedures to test a global search algorithm applied to a space trajectory design problem. Then, we present some performance indexes that can be used to evaluate the effectiveness of global optimization algorithms. The performance indexes are then compared highlighting the actual significance of each one of them. A number of global optimization algorithms are tested on four typical space trajectory design problems. From the results of the proposed testing procedure we infer for each pair algorithm-problem the relation between the heuristics implemented in the solution algorithm and the main characteristics of the problem under investigation. From this analysis we derive a novel interpretation of some evolutionary heuristics, based on dynamical system theory and we significantly improve the performance of one of the tested algorithms

Constraints on the near-Earth asteroid obliquity distribution from the Yarkovsky effect

Aims. From lightcurve and radar data we know the spin axis of only 43 near-Earth asteroids. In this paper we attempt to constrain the spin axis obliquity distribution of near-Earth asteroids by leveraging the Yarkovsky effect and its dependence on an asteroid’s obliquity. Methods. By modeling the physical parameters driving the Yarkovsky effect, we solve an inverse problem where we test different simple parametric obliquity distributions. Each distribution results in a predicted Yarkovsky effect distribution that we compare with a X2 test to a dataset of 125 Yarkovsky estimates. Results. We find different obliquity distributions that are statistically satisfactory. In particular, among the considered models, the best-fit solution is a quadratic function, which only depends on two parameters, favors extreme obliquities, consistent with the expected outcomes from the YORP effect, has a 2:1 ratio between retrograde and direct rotators, which is in agreement with theoretical predictions, and is statistically consistent with the distribution of known spin axes of near-Earth asteroids

Polylactic acid (PLA)/Silver-NP/VitaminE bionanocomposite electrospun nanofibers with antibacterial and antioxidant activity

Cataloged from PDF version of article.The antibacterial property of silver nanoparticles (Ag-NPs) and the antioxidant activity of Vitamin E have been combined by incorporation of these two active components within polylactic acid (PLA) nanofibers via electrospinning (PLA/Ag-NP/VitaminE nanofibers). The morphological and structural characterizations of PLA/Ag-NP/VitaminE nanofibers were performed by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy and X-ray diffraction. The average fiber diameter was 140 ± 60 nm, and the size of the Ag-NP was 2.7 ± 1.5 nm. PLA/Ag-NP/VitaminE nanofibers inhibited growth of Escherichia coli, Listeria monocytogenes and Salmonella typhymurium up to 100 %. The amount of released Ag ions from the nanofibers immersed in aqueous solution was determined by Inductively Coupled Plasma Mass Spectrometry, and it has been observed that the release of Ag ions was kept approximately constant after 10 days of immersion. The antioxidant activity of PLA/Ag-NP/VitaminE nanofibers was evaluated according to DPPH (2,2-diphenyl-1-picrylhydrazyl) method and determined as 94 %. The results of the tests on fresh apple and apple juice indicated that the PLA/Ag/VitaminE nanofiber membrane actively reduced the polyphenol oxidase activity. The multifunctional electrospun PLA nanofibers incorporating Ag-NP and Vitamin E may be quite applicable in food packaging due to the extremely large surface area of nanofibers along with antibacterial and antioxidant activities. These materials could find application in food industry as a potential preservative packaging for fruits and juices. © 2014, Springer Science+Business Media Dordrecht

Optimal low-thrust trajectories to asteroids through an algorithm based on differential dynamic programming

In this paper an optimisation algorithm based on Differential Dynamic Programming is applied to the design of rendezvous and fly-by trajectories to near Earth objects. Differential dynamic programming is a successive approximation technique that computes a feedback control law in correspondence of a fixed number of decision times. In this way the high dimensional problem characteristic of low-thrust optimisation is reduced into a series of small dimensional problems. The proposed method exploits the stage-wise approach to incorporate an adaptive refinement of the discretisation mesh within the optimisation process. A particular interpolation technique was used to preserve the feedback nature of the control law, thus improving robustness against some approximation errors introduced during the adaptation process. The algorithm implements global variations of the control law, which ensure a further increase in robustness. The results presented show how the proposed approach is capable of fully exploiting the multi-body dynamics of the problem; in fact, in one of the study cases, a fly-by of the Earth is scheduled, which was not included in the first guess solution

Synthesis and characterization of ZnO nanopowder by non-basic

Nanocrystalline ZnO particles were prepared from methanolic solutions of zinc acetate dihydrate without using base such as NaOH or LiOH through a colloid process carried out at a low temperature of 60 o C. The precipitate obtained after 12-72h contained ZnO, covered with polymeric species of zinc hydroxo acetate. The reaction course was studied by mass spectrometry means. To complete the hydrolysis process, up to pure ZnO, it was necessarily to reflux the white precipitate separate from methanolic solution, in water at 80 o C. We found that reaction time in the presence of methanol primarily influenced the size of the particles, while the reaction time in the presence of water mainly influenced the ZnO purity

Multiferroic (Nd,Fe)-doped PbTiO3 ceramics with coexistent ferroelectricity and magnetism at room temperature

We report the structural, dielectric, elastic, ferroelectric and ferromagnetic properties of multiferroic (Nd, Fe)-doped PbTiO3 perovskite ceramics with composition (Pb 0.88 Nd 0.08 )(Ti 0.94 Fe 0.04 Mn 0.02 )O 3 , prepared by different solid state reaction methods: the first one based on a single-stage calcination (Method I) and the second based on a double-stage calcination (Method II). Structural, dielectric and anelastic measurements evidenced a double phase transition for samples prepared by Method I, which has been attributed to phase separation. This phase separation has been confirmed also by TEM and HRTEM investigations. Samples prepared by Method II showed a single phase transition from paraelectric to ferroelectric phase. We found coexistent ferroelectric and ferromagnetic properties, also at room-temperature, but only for ceramics prepared by Method II. The crucial role of calcination process for avoiding phase separation and obtaining homogeneous structures with ferroelectric and ferromagnetic order is underlined

Pseudo-single crystal electrochemistry on polycrystalline electrodes : visualizing activity at grains and grain boundaries on platinum for the Fe2+/Fe3+ redox reaction

The influence of electrode surface structure on electrochemical reaction rates and mechanisms is a major theme in electrochemical research, especially as electrodes with inherent structural heterogeneities are used ubiquitously. Yet, probing local electrochemistry and surface structure at complex surfaces is challenging. In this paper, high spatial resolution scanning electrochemical cell microscopy (SECCM) complemented with electron backscatter diffraction (EBSD) is demonstrated as a means of performing ‘pseudo-single-crystal’ electrochemical measurements at individual grains of a polycrystalline platinum electrode, while also allowing grain boundaries to be probed. Using the Fe2+/3+ couple as an illustrative case, a strong correlation is found between local surface structure and electrochemical activity. Variations in electrochemical activity for individual high index grains, visualized in a weakly adsorbing perchlorate medium, show that there is higher activity on grains with a significant (101) orientation contribution, compared to those with (001) and (111) contribution, consistent with findings on single-crystal electrodes. Interestingly, for Fe2+ oxidation in a sulfate medium a different pattern of activity emerges. Here, SECCM reveals only minor variations in activity between individual grains, again consistent with single-crystal studies, with a greatly enhanced activity at grain boundaries. This suggests that these sites may contribute significantly to the overall electrochemical behavior measured on the macroscale

Comparison of structure, regeneration and dead wood in virgin forest remnant and managed forest on Grmecˇ Mountain in Western Bosnia

This paper compares the forest structure, regeneration and distribution of dead wood in a virgin forest remnant and a close-to-nature managed beech–conifer mixture situated on Grmecˇ Mountain inWestern Bosnia. The investigations were carried out in a 1 ha permanent sample plot and 35 circular plots (20m radius) in the virgin forest and in 17 circular plots (25m radius) in managed forests. The number of trees in the managed forest was significantly ( p ¼ 0.05) higher than that in virgin forest and the distribution of the number of trees per diameter classes had a decreasing trend, but with a different shape in the virgin forest compared to the managed stands. In the lower diameter classes, the stock volume recorded in virgin forest was half of that in the managed forest, whilst for higher diameter classes the cumulated volume of the growing stock was almost double in virgin forest. The young crops had a significantly lower presence in the virgin forest and a larger volume of dead wood was identified in the virgin forest than in managed stands. The study results are important in assessing the consequences of close-to-nature management on the forest structure and regeneration when compared to the condition in virgin forests