A COMPARATIVE STUDY ON THE IN-VITRO ANTIMICROBIAL ACTIVITY OF THE ROOTS OF FOUR THOTTEA SPECIES

Objective: The main objective of the present study was to investigate the antimicrobial activity of the methanol extract of the roots of four Thottea species. Methods: The root extracts of four Thottea species were subjected to antimicrobial assay by Minimum Inhibitory Concentration (MIC) and Agar Disc diffusion Assay against various medically important pathogens. Results: It is evident from the study that. Significant antibacterial activity was recorded by Thottea sivarajanii and highest activity was recorded against Pseudomonas aeruginosa and Staphylococcus epidermis (64 µg/ml). Out of the four extracts tested for antifungal activity, Thottea barberi and Thottea ponmudiana recorded significant antifungal activity and the highest activity was recorded by T. barberi against Trichophyton rubrum (16µg/ml). Conclusion: Results offer a scientific basis for the traditional use of Thottea species in the treatment of microbial infections, showing that the plant extract has an enormous potential as a prospective alternative drug against microbial pathogens. The present study lays the basis for future studies, to validate the possible use of Thottea species as a candidate in the treatment of microbial infections

Reactive oxygen species (ROS) mediated enhanced anti-candidal activity of ZnS-ZnO nanocomposites with low inhibitory concentrations

Enhanced antifungal activity against the yeast species Candida albicans, Candida tropicalis and Saccharomyces cerevisiae was displayed by ZnS-ZnO nanocomposites prepared by a simple precipitation technique. The antifungal activity was significantly more in the presence of indoor light than under dark conditions and was a clear confirmation of the inhibitory role of reactive oxygen species (ROS) generated in situ by the photocatalytic nanocomposites. The generation of ROS was further evidenced by flow cytometry results and membrane permeabilisation studies. Time kill assay and growth curve analysis indicated diminished antifungal activity under dark conditions due primarily to Zn2+ efflux in solution. © 2015 The Royal Society of Chemistry

Enrichment of rare earth elements in garnets from the offshore of Anjengo, south-west coast of India

1293-1297Offshore sediments off Anjengo contain garnet grains that vary from light to dark pink and shades of red in colour and morphology from sub-rounded to irregular shapes. These garnets of the area are mainly almandine-pyrope variety with low grossular and spessartine. Electron Probe Micro analysis data indicated that the garnet grains have a good concentration of REEs (0.17 – 0.53 wt %). During partial melting and anatexis, REE from accessory minerals such as monazite, xenotime, and zircon might have got entrapped in garnet resulting in the enrichment of REE in Anjengo garnet

Dynamics of nanoscale droplets on moving surfaces

We use molecular dynamics (MD) simulations to investigate the dynamic wetting of nanoscale water droplets on moving surfaces. The density and hydrogen bonding profiles along the direction normal to the surface are reported, and the width of the water depletion layer is evaluated first for droplets on three different static surfaces: silicon, graphite, and a fictitious superhydrophobic surface. The advancing and receding contact angles, and contact angle hysteresis, are then measured as a function of capillary number on smooth moving silicon and graphite surfaces. Our results for the silicon surface show that molecular displacements at the contact line are influenced greatly by interactions with the solid surface and partly by viscous dissipation effects induced through the movement of the surface. For the graphite surface, however, both the advancing and receding contact angles values are close to the static contact angle value and are independent of the capillary number; i.e., viscous dissipation effects are negligible. This finding is in contrast with the wetting dynamics of macroscale water droplets, which show significant dependence on the capillary number

Tetanus and Diphtheria Seroprotection among Children Younger Than 15 Years in Nigeria, 2018: Who Are the Unprotected Children?

Serological surveys provide an objective biological measure of population immunity, and tetanus serological surveys can also assess vaccination coverage. We undertook a national assessment of immunity to tetanus and diphtheria among Nigerian children aged <15 years using stored specimens collected during the 2018 Nigeria HIV/AIDS Indicator and Impact Survey, a national cross-sectional household-based survey. We used a validated multiplex bead assay to test for tetanus and diphtheria toxoid-antibodies. In total, 31,456 specimens were tested. Overall, 70.9% and 84.3% of children aged <15 years had at least minimal seroprotection (≥0.01 IU/mL) against tetanus and diphtheria, respectively. Seroprotection was lowest in the north west and north east zones. Factors associated with increased tetanus seroprotection included living in the southern geopolitical zones, urban residence, and higher wealth quintiles (p < 0.001). Full seroprotection (≥0.1 IU/mL) was the same for tetanus (42.2%) and diphtheria (41.7%), while long-term seroprotection (≥1 IU/mL) was 15.1% for tetanus and 6.0% for diphtheria. Full- and long-term seroprotection were higher in boys compared to girls (p < 0.001). Achieving high infant vaccination coverage by targeting specific geographic areas and socio-economic groups and introducing tetanus and diphtheria booster doses in childhood and adolescence are needed to achieve lifelong protection against tetanus and diphtheria and prevent maternal and neonatal tetanus

Systematic Review of Potential Health Risks Posed by Pharmaceutical, Occupational and Consumer Exposures to Metallic and Nanoscale Aluminum, Aluminum Oxides, Aluminum Hydroxide and Its Soluble Salts

Aluminum (Al) is a ubiquitous substance encountered both naturally (as the third most abundant element) and intentionally (used in water, foods, pharmaceuticals, and vaccines); it is also present in ambient and occupational airborne particulates. Existing data underscore the importance of Al physical and chemical forms in relation to its uptake, accumulation, and systemic bioavailability. The present review represents a systematic examination of the peer-reviewed literature on the adverse health effects of Al materials published since a previous critical evaluation compiled by Krewski et al. (2007). Challenges encountered in carrying out the present review reflected the experimental use of different physical and chemical Al forms, different routes of administration, and different target organs in relation to the magnitude, frequency, and duration of exposure. Wide variations in diet can result in Al intakes that are often higher than the World Health Organization provisional tolerable weekly intake (PTWI), which is based on studies with Al citrate. Comparing daily dietary Al exposures on the basis of “total Al”assumes that gastrointestinal bioavailability for all dietary Al forms is equivalent to that for Al citrate, an approach that requires validation. Current occupational exposure limits (OELs) for identical Al substances vary as much as 15-fold. The toxicity of different Al forms depends in large measure on their physical behavior and relative solubility in water. The toxicity of soluble Al forms depends upon the delivered dose of Al+ 3 to target tissues. Trivalent Al reacts with water to produce bidentate superoxide coordination spheres [Al(O2)(H2O4)+ 2 and Al(H2O)6 + 3] that after complexation with O2•−, generate Al superoxides [Al(O2•)](H2O5)]+ 2. Semireduced AlO2• radicals deplete mitochondrial Fe and promote generation of H2O2, O2 • − and OH•. Thus, it is the Al+ 3-induced formation of oxygen radicals that accounts for the oxidative damage that leads to intrinsic apoptosis. In contrast, the toxicity of the insoluble Al oxides depends primarily on their behavior as particulates. Aluminum has been held responsible for human morbidity and mortality, but there is no consistent and convincing evidence to associate the Al found in food and drinking water at the doses and chemical forms presently consumed by people living in North America and Western Europe with increased risk for Alzheimer\u27s disease (AD). Neither is there clear evidence to show use of Al-containing underarm antiperspirants or cosmetics increases the risk of AD or breast cancer. Metallic Al, its oxides, and common Al salts have not been shown to be either genotoxic or carcinogenic. Aluminum exposures during neonatal and pediatric parenteral nutrition (PN) can impair bone mineralization and delay neurological development. Adverse effects to vaccines with Al adjuvants have occurred; however, recent controlled trials found that the immunologic response to certain vaccines with Al adjuvants was no greater, and in some cases less than, that after identical vaccination without Al adjuvants. The scientific literature on the adverse health effects of Al is extensive. Health risk assessments for Al must take into account individual co-factors (e.g., age, renal function, diet, gastric pH). Conclusions from the current review point to the need for refinement of the PTWI, reduction of Al contamination in PN solutions, justification for routine addition of Al to vaccines, and harmonization of OELs for Al substances

Co-composting: An Opportunity to Produce Compost with Designated Tailor-Made Properties

AbstractCo-composting is a technique that allows the aerobic degradation of organic waste mixtures, primarily aiming at obtaining compost that can be used as fertiliser or soil amendment. As compared to the typical composting activity, the main difference is not merely the use of more than one feedstock to start and sustain the biodegradation process, but also the possibility of combining various kinds of waste to obtain 'tailored' products with designed properties, or to reclaim and valorise natural resources, such as degraded soils or polluted soils and sediments. Set up of appropriate co-composting protocols can be a way to optimise the management of waste produced by different sectors of agriculture and industry and also from human settlements. Different formulations can not only optimise the biodegradation process through the adjustment of nutrient ratios, but also lead to the formation of products with innovative properties. Moreover, co-composting can be a technique of choice for the reclamation of soils degraded by intensive agriculture or contaminated soils and sediments. In fact, an appropriate mix of organic waste and soils can restore the soil structure and induce fertility in nutrient-depleted soils, and also remediate polluted soils and sediments through degradation of organic pollutants and stabilisation of heavy metals. While the selection of different mixes of organic waste may lead to the design of composts with specific properties and the potential valorisation of selected waste materials, there are still several factors that hamper the development of co-composting platforms, mainly insufficient knowledge of some chemical and microbiological processes, but also some legislative aspects. This chapter illustrates the progress achieved in co-composting technology worldwide, some key legislative aspects related to the co-composting process, the main scientific and technical aspects that deserve research attention to further develop co-composting technology, and successful applications of co-composting for the reclamation of soils and sediments, allowing their use for cultivation or as growing media in plant nurseries. A specific case study of the production of fertile plant-growing media from sediment co-composting with green waste is also illustrated