Mechanical and Structural Behavior of Granular Material Packed Beds for Space Life Support System Applications

Long-term human mission to space, such as living in International Space Station (ISS), Lunar, and Martian bases, and travel to Mars, must m ake use of Advanced Life Support Systems (ALSS) to generate and recycle critical life supporting elements like oxygen and water. Oxygen Gen eration Assembly (OGA) and Water Processor Assembly (WPA), critical c omponents of ALSS, make use of series of granular material packed beds for generation and recycling of oxygen and water. Several granular m aterials can be used for generation, recycling, processing and recovery of oxygen and water. For example, they may include soft bed media, e.g. ion exchange resins for oxygen generation assembly and hard bed media such as, activated alumina, magchem (Magnesium oxide) and activa ted carbon to remove organic species like ethanol, methanol, and urea from wastewater in Water recovery/processing assembly. These beds are generally packed using a plate-spring mechanism to provide sufficien t compaction to the bed media throughout the course of operation. This paper presents results from an experimental study of a full-scale, 3 8.1 cm (15 inches) long and 3.7 cm (1.44 inches) diameter. activated alumina bed enclosed in a cylinder determining its force-displacement behavior, friction mobilizing force, and axial normal stress distribu tion under various axially applied loads and at different levels of packing. It is observed that force-displacement behavior is non-linear for low compaction level and becomes linear with increase in compaction of the bed media. Axial normal stress distribution along the length of the bed media decreased non-linearly with increase in depth from the loading end of the granular media. This paper also presents experimental results on the amount of particulates generated corresponding to various compaction levels. Particulates generated from each of the tests were measured using standard US sieves. It was found that the p articulates and the overall displacement of the bed media increased with decrease in initial compaction of the bed media. This effect could be attributed to the greater tendency for inter-particle sliding/rub bing due to smaller internal friction angles, as seen from the shear tests, at lesser initial compacted levels. Upon unloading, it was obse rved that there was no change in displacement (especially rebounding) in the bed media. This effect could be attributed to the fact that th e porous activated alumina particles fracture/break upon increase in applied load (during loading phase) and occupy void spaces in between the material grains; thereby leading to settling of the media. The lo ad-displacement curve becomes more linear with increase in initial compaction of the bed media. It is concluded that compaction considerabl y affects the load-displacement behavior of the bed media. A series of tests were also conducted on the packed bed media to determine the f orce required to mobilize the friction between the bed media and the housing cylinder. The results from these tests showed the existence of significant friction between the bed media and the encasing stainles s steel cylinder. Further, it was found that friction effects were more pronounced for media with higher initial compaction. Internal frict ion of the granular media was measured using direct shear apparatus. It was observed that the internal friction increased with increase in initial compaction of the bed media. In this study, a computational m odel (CM) is also developed using finite element software ANSYS to verify experimental results obtained for the distribution of the axial n ormal stress and axial displacement along the length of the full-scal e activated alumina bed media. In the computational model, the granular material is considered to have appropriate failure and frictional c ontact exists between the wall and the granular media. It is observed that the model predicts results closely with the experimental method. The compational results show that the axial normal stress distribution along the length of the activated alumina media decreases non-linea rly from the loading end and is negligible beyond a certain depth. Th is can be attributed to the existence of friction between the walls and the media and that the friction takes up most of the applied load

Synthesis of multifunctional nanocomposite material: tungstate-pillared Mg-Al hydrotalcite-like compound

Hydrotalcite-like compounds (HTLC) with different cationic ratios (Mg/AI) and charge-balancing inter layer anions were prepared and characterized. The surface areas of HTLCs were found to increase with increasing Mg/AI ratio. Pure HTLCs were obtained when the Mg/AI ratio was below 7. Water adsorption properties of HTLCs show that they are microporous. BET surface areas with water and nitrogen are dependent on the Mg/AI ratio of HTLC. Tungstate-pillared HTLC (synthesized from Mg/AI=7) was prepared and characterized, resulting in higher gallery height and surface area

Draft bills and research reports on: reducing judicial corruption and child labor in Nepal

These two draft bills and accompanying research report comprise the work of two teams of Nepali officials from Nepal's Ministry of Law and Justice who prepared them in the context of the Boston University School of Law Program on Legislative Drafting for Democratic Social Change. They attended that Program as part of a larger Ministry of Law and Justice Program, funded by the United Nations Development Program (UNDP), to strengthen Nepal's legal framework and the Rule of Law. Using the bills and reports as case studies, the four officials aimed to learn legislative theory, methodology and techniques. The Ministry had assigned them, on their return to Nepal, to play a significant role in institutionalizing an on-going learning process to strengthen Nepali drafters' capacity to prepare the effectively implementable legislation necessary to ensure good governance and development

Application of GPS tracking techniques to orbit determination for TDRS

In this paper, we evaluate two fundamentally different approaches to TDRS orbit determination utilizing Global Positioning System (GPS) technology and GPS-related techniques. In the first, a GPS flight receiver is deployed on the TDRSS spacecraft. The TDRS ephemerides are determined using direct ranging to the GPS spacecraft, and no ground network is required. In the second approach, the TDRSS spacecraft broadcast a suitable beacon signal, permitting the simultaneous tracking of GPS and TDRSS satellites from a small ground network. Both strategies can be designed to meet future operational requirements for TDRS-2 orbit determination

Don’t turn your back on the symptoms of psychosis : a proof-of-principle, quasi-experimental public health trial to reduce the duration of untreated psychosis in Birmingham, UK

Background: Reducing the duration of untreated psychosis (DUP) is an aspiration of international guidelines for first episode psychosis; however, public health initiatives have met with mixed results. Systematic reviews suggest that greater focus on the sources of delay within care pathways, (which will vary between healthcare settings) is needed to achieve sustainable reductions in DUP (BJP 198: 256-263; 2011). Methods/Design: A quasi-experimental trial, comparing a targeted intervention area with a ‘detection as usual’ area in the same city. A proof-of–principle trial, no a priori assumptions are made regarding effect size; key outcome will be an estimate of the potential effect size for a definitive trial. DUP and number of new cases will be collected over an 18-month period in target and control areas and compared; historical data on DUP collected in both areas over the previous three years, will serve as a benchmark. The intervention will focus on reducing two significant DUP component delays within the overall care pathway: delays within the mental health service and help-seeking delay. Discussion: This pragmatic trial will be the first to target known delays within the care pathway for those with a first episode of psychosis. If successful, this will provide a generalizable methodology that can be implemented in a variety of healthcare contexts with differing sources of delay. Trial registration: http://www.controlled-trials.com/ISRCTN45058713 Keywords: Public mental health campaign, First-episode psychosis, Early detection, Duration of untreated psychosis, Youth mental healt

Towards Dual-Readout Calorimetry For Redtop Experiment

By virtue of peculiar properties of the eta (η) Goldstone boson, the study of it’s de- cays is very important. The rare decays of this meson can provide unique opportunities to probe several fundamental invariance principles of physics world. The REDTOP experi- ment aims at searching for Physics Beyond Standard Model (BSM) by studying such decays at a sensitivity of 10^ (−10) or below, which requires 10^ (12) or more η mesons. The REDTOP collaboration has designed a detector to produce and reconstruct such a large number of η mesons, which will make REDTOP a rare decay factory. The detector is designed to be minimally sensitive to the background and only records the processes of interest. One of the REDTOP sub-detector is the ADRIANO calorimeter which is a specific version of an optimized dual-readout calorimeter. This calorimeter consists of two active regions: optical standard lead-glass which generates exclusively Cerenkov photons, and scintillating plastic which generates scintillating signals. Present work is concentrated around prototyping of Cerenkov radiators and measuring the light output from those radiators using a test beam at Fermilab

Middle mountains forests of Nepal

Publication no. 3201

Trajectories of self-rated health in people with diabetes: Associations with functioning in a prospective community sample

© 2013 Schmitz et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Background: Self-rated health (SRH) is a single-item measure that is one of the most widely used measures of general health in population health research. Relatively little is known about changes and the trajectories of SRH in people with chronic medical conditions. The aims of the present study were to identify and describe longitudinal trajectories of self-rated health (SRH) status in people with diabetes. Methods: A prospective community study was carried out between 2008 and 2011. SRH was assessed at baseline and yearly at follow-ups (n=1288). Analysis was carried out through trajectory modeling. The trajectory groups were subsequently compared at 4 years follow-up with respect to functioning. Results: Four distinct trajectories of SRH were identified: 1) 72.2% of the participants were assigned to a persistently good SRH trajectory; 2) 10.1% were assigned to a persistently poor SRH trajectory; 3) mean SRH scores changed from good to poor for one group (7.3%); while 4) mean SRH scores changed from poor to medium/good for another group (10.4%). Those with a persistently poor perception of health status were at higher risk for poor functioning at 4 years follow-up than those whose SRH scores decreased from good to poor. Conclusions: SRH is an important predictor for poor functioning in diabetes, but the trajectory of SRH seems to be even more important. Health professionals should pay attention to not only SRH per se, but also changes in SRH over time.This work was supported by Operating Grant MOP-84574 from the Canadian Institutes of Health Research (CIHR). GG was supported by a doctoral fellowship from the CIHR. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

High mountains and high Himal forests of Nepal

Publication no. 4201