301 research outputs found
The effect of four commercially available steel decontamination processes on the performance of external coatings
External coatings used for corrosion protection often have to perform under severely corrosive environments. One major concern regarding coating performance is the negative effect of soluble salts on the steel substrate at the time of coating application, particularly for marine maintenance coating applications. These salts impact the ability of the applied coating systems to protect the steel in several ways including osmotic coating blistering, promotion of under-film metallic corrosion and coating disbondment. This paper focuses on removal of soluble salts contamination by commercially available decontamination processes in relation to external coating systems. We directly compare the effectiveness of four cleaning methods with the performance of ten coating systems. The methodology of surface contamination and preparation of test panels is discussed. After cleaning, sample evaluation for chloride ion contamination levels was carried out using Field method (commercial chloride ion test kit for surfaces) and Ion Chromatography method. Additionally, Scanning Electron Microscopy Energy Dispersive X-ray Spectroscopy (SEM/EDX) and elemental surface mapping analysis were carried out. Laboratory testing of coating systems included Adhesion, Porosity, Electrochemical Impedance Spectroscopy (EIS) analysis and cyclic UV/Salt Fog exposure. The performance of the ten coatings on all the substrates was good, but there were differences in gloss retention and on the degree of checking of the different coatings. The only significant difference in performance of the coatings compared to the method used for cleaning the substrate was higher undercreep observed for most of the coatings applied to the ultra-high pressure water jetted system. This shows the importance of substrate preparation due to the sensitivity of the coatings to even low levels of salt. Two coatings did not show increased undercreep and these may be more applicable for offshore maintenance applications where dry abrasive blasting is sometimes not used. The chemical treatment cleaning method used prior to coating application did not show any significant positive or negative effect on the performance of the applied coatings. The fact that the only differences in performance for the coatings applied to the differently prepared substrates was seen for undercreep suggests that the difference may be exacerbated for immersion situations. A follow up study to this one will examine the performance of internal coatings using immersion tests, and it will be interesting to see if these show increased effect on coating performance
S06RS SGR No. 8 (System President)
A Resolution
to urge the LSU Board of Supervisors to include student representation on the search committee for the LSU System President
Photoacoustic Sentinel Lymph Node Imaging with Self-Assembled Copper Neodecanoate Nanoparticles
Photoacoustic tomography (PAT) is emerging as a novel, hybrid, and non-ionizing imaging modality because of its satisfactory spatial resolution and high soft tissue contrast. PAT combines the advantages of both optical and ultrasonic imaging methods. It opens up the possibilities for noninvasive staging of breast cancer and may replace sentinel lymph node (SLN) biopsy in clinic in the near future. In this work, we demonstrate for the first time that copper can be used as a contrast metal for near-infrared detection of SLN using PAT. A unique strategy is adopted to encapsulate multiple copies of Cu as organically soluble small molecule complexes within a phospholipid-entrapped nanoparticle. The nanoparticles assumed a size of 80–90 nm, which is the optimum hydrodynamic diameter for its distribution throughout the lymphatic systems. These particles provided at least 6-fold higher signal sensitivity in comparison to blood, which is a natural absorber of light. We also demonstrated that high SLN detection sensitivity with PAT can be achieved in a rodent model. This work clearly demonstrates for the first time the potential use of copper as an optical contrast agent
Generic Delivery of Payload of Nanoparticles Intracellularly via Hybrid Polymer Capsules for Bioimaging Applications
Towards the goal of development of a generic nanomaterial delivery system and delivery of the ‘as prepared’ nanoparticles without ‘further surface modification’ in a generic way, we have fabricated a hybrid polymer capsule as a delivery vehicle in which nanoparticles are loaded within their cavity. To this end, a generic approach to prepare nanomaterials-loaded polyelectrolyte multilayered (PEM) capsules has been reported, where polystyrene sulfonate (PSS)/polyallylamine hydrochloride (PAH) polymer capsules were employed as nano/microreactors to synthesize variety of nanomaterials (metal nanoparticles; lanthanide doped inorganic nanoparticles; gadolinium based nanoparticles, cadmium based nanoparticles; different shapes of nanoparticles; co-loading of two types of nanoparticles) in their hollow cavity. These nanoparticles-loaded capsules were employed to demonstrate generic delivery of payload of nanoparticles intracellularly (HeLa cells), without the need of individual nanoparticle surface modification. Validation of intracellular internalization of nanoparticles-loaded capsules by HeLa cells was ascertained by confocal laser scanning microscopy. The green emission from Tb3+ was observed after internalization of LaF3:Tb3+(5%) nanoparticles-loaded capsules by HeLa cells, which suggests that nanoparticles in hybrid capsules retain their functionality within the cells. In vitro cytotoxicity studies of these nanoparticles-loaded capsules showed less/no cytotoxicity in comparison to blank capsules or untreated cells, thus offering a way of evading direct contact of nanoparticles with cells because of the presence of biocompatible polymeric shell of capsules. The proposed hybrid delivery system can be potentially developed to avoid a series of biological barriers and deliver multiple cargoes (both simultaneous and individual delivery) without the need of individual cargo design/modification
ccdc80-l1 Is Involved in Axon Pathfinding of Zebrafish Motoneurons
Axon pathfinding is a subfield of neural development by which neurons send out axons to reach the correct targets. In particular, motoneurons extend their axons toward skeletal muscles, leading to spontaneous motor activity. In this study, we identified the zebrafish Ccdc80 and Ccdc80-like1 (Ccdc80-l1) proteins in silico on the basis of their high aminoacidic sequence identity with the human CCDC80 (Coiled-Coil Domain Containing 80). We focused on ccdc80-l1 gene that is expressed in nervous and non-nervous tissues, in particular in territories correlated with axonal migration, such as adaxial cells and muscle pioneers. Loss of ccdc80-l1 in zebrafish embryos induced motility issues, although somitogenesis and myogenesis were not impaired. Our results strongly suggest that ccdc80-l1 is involved in axon guidance of primary and secondary motoneurons populations, but not in their proper formation. ccdc80-l1 has a differential role as regards the development of ventral and dorsal motoneurons, and this is consistent with the asymmetric distribution of the transcript. The axonal migration defects observed in ccdc80-l1 loss-of-function embryos are similar to the phenotype of several mutants with altered Hedgehog activity. Indeed, we reported that ccdc80-l1 expression is positively regulated by the Hedgehog pathway in adaxial cells and muscle pioneers. These findings strongly indicate ccdc80-l1 as a down-stream effector of the Hedgehog pathway
Toxicology of chemically modified graphene-based materials for medical application.
This review article aims to provide an overview of chemically modified graphene, and graphene oxide (GO), and their impact on toxicology when present in biological systems. Graphene is one of the most promising nanomaterials due to unique physicochemical properties including enhanced optical, thermal, and electrically conductive behavior in addition to mechanical strength and high surface-to-volume ratio. Graphene-based nanomaterials have received much attention over the last 5Â years in the biomedical field ranging from their use as polymeric conduits for nerve regeneration, carriers for targeted drug delivery and in the treatment of cancer via photo-thermal therapy. Both in vitro and in vivo biological studies of graphene-based nanomaterials help understand their relative toxicity and biocompatibility when used for biomedical applications. Several studies investigating important material properties such as surface charge, concentration, shape, size, structural defects, and chemical functional groups relate to their safety profile and influence cyto- and geno-toxicology. In this review, we highlight the most recent studies of graphene-based nanomaterials and outline their unique properties, which determine their interactions under a range of environmental conditions. The advent of graphene technology has led to many promising new opportunities for future applications in the field of electronics, biotechnology, and nanomedicine to aid in the diagnosis and treatment of a variety of debilitating diseases
Multifunctional to multistage delivery systems: The evolution of nanoparticles for biomedical applications
Recruitment sources of invasive Bighead carp (Hypopthalmichthys nobilis) and Silver carp (H. molitrix) inhabiting the Illinois River
Multifunctional mitoxantrone-conjugated magnetic nanosystem for targeted therapy of folate receptor-overexpressing malignant cells
- …