Structure of and ion segregation to an alumina grain boundary: implications for growth and creep

Using periodic density-functional theory (DFT), we investigated the structure and cohesive properties of the �-alumina �11 tilt grain boundary, with and without segregated elements, as a model for the thermally grown oxide in jet engine thermal barrier coatings. We identified a new low-energy structure different from what was proposed previously based on electron microscopy and classical potential simulations. We explored the structure and energy landscape at the grain boundary for segregated Al, O, and early transition metals (TMs) Y and Hf. We predict that the TMs preferentially adsorb at the same sites as Al, while some adsites favored by O remain unblocked by TMs. All segregated atoms have a limited effect on grain boundary adhesion, suggesting that adhesion energies alone cannot be used for predictions of creep inhibition. These findings provide some new insights into how TM dopants affect alumina growth and creep kinetics. I

Quantum Dimensional Zeeman Effect in the Magneto-optical Absorption Spectrum for Quantum Dot - Impurity Center Systems

Magneto-optical properties of the quantum dot - impurity center (QD-IC) systems synthesized in a transparent dielectric matrix are considered. For the QD one-electron state description the parabolic model of the confinement potential is used. Within the framework of zero-range potential model and the effective mass approach, the light impurity absorption coefficient for the case of transversal polarization with respect to the applied magnetic field direction, with consideration of the QD size dispersion, has been analytically calculated. It is shown that for the case of transversal polarization the light impurity absorption spectrum is characterized by the quantum dimensional Zeeman effect.Comment: 18 pages, 1 figure, PDF fil

Probing the local nature of excitons and plasmons in few-layer MoS₂

Excitons and plasmons are the two most fundamental types of collective electronic excitations occurring in solids. Traditionally, they have been studied separately using bulk techniques that probe their average energetic structure over large spatial regions. However, as the dimensions of materials and devices continue to shrink, it becomes crucial to understand how these excitations depend on local variations in the crystal- and chemical structure on the atomic scale. Here, we use monochromated low-loss scanning-transmission-electron-microscopy electron-energy-loss spectroscopy, providing the best simultaneous energy and spatial resolution achieved to-date to unravel the full set of electronic excitations in few-layer MoS₂ nanosheets over a wide energy range. Using first-principles, many-body calculations we confirm the excitonic nature of the peaks at ~ 2 and ~ 3 eV in the experimental electron-energy-loss spectrum and the plasmonic nature of higher energy-loss peaks. We also rationalise the non-trivial dependence of the electron-energy-loss spectrum on beam and sample geometry such as the number of atomic layers and distance to steps and edges. Moreover, we show that the excitonic features are dominated by the long wavelength (q = 0) components of the probing field, while the plasmonic features are sensitive to a much broader range of q-vectors, indicating a qualitative difference in the spatial character of the two types of collective excitations. Our work provides a template protocol for mapping the local nature of electronic excitations that open new possibilities for studying photo-absorption and energy transfer processes on a nanometer scale

Mechanical and Electronic Properties of MoS2_2 Nanoribbons and Their Defects

We present our study on atomic, electronic, magnetic and phonon properties of one dimensional honeycomb structure of molybdenum disulfide (MoS$_2$) using first-principles plane wave method. Calculated phonon frequencies of bare armchair nanoribbon reveal the fourth acoustic branch and indicate the stability. Force constant and in-plane stiffness calculated in the harmonic elastic deformation range signify that the MoS$_2$ nanoribbons are stiff quasi one dimensional structures, but not as strong as graphene and BN nanoribbons. Bare MoS$_2$ armchair nanoribbons are nonmagnetic, direct band gap semiconductors. Bare zigzag MoS$_2$ nanoribbons become half-metallic as a result of the (2x1) reconstruction of edge atoms and are semiconductor for minority spins, but metallic for the majority spins. Their magnetic moments and spin-polarizations at the Fermi level are reduced as a result of the passivation of edge atoms by hydrogen. The functionalization of MoS$_2$ nanoribbons by adatom adsorption and vacancy defect creation are also studied. The nonmagnetic armchair nanoribbons attain net magnetic moment depending on where the foreign atoms are adsorbed and what kind of vacancy defect is created. The magnetization of zigzag nanoribbons due to the edge states is suppressed in the presence of vacancy defects.Comment: 11 pages, 5 figures, first submitted at November 23th, 200

Balancing hydrogen adsorption/desorption by orbital modulation for efficient hydrogen evolution catalysis

Hydrogen adsorption/desorption behavior plays a key role in hydrogen evolution reaction (HER) catalysis. The HER reaction rate is a trade-off between hydrogen adsorption and desorption on the catalyst surface. Herein, we report the rational balancing of hydrogen adsorption/desorption by orbital modulation using introduced environmental electronegative carbon/nitrogen (C/N) atoms. Theoretical calculations reveal that the empty d orbitals of iridium (Ir) sites can be reduced by interactions between the environmental electronegative C/N and Ir atoms. This balances the hydrogen adsorption/ desorption around the Ir sites, accelerating the related HER process. Remarkably, by anchoring a small amount of Ir nanoparticles (7.16 wt%) in nitrogenated carbon matrixes, the resulting catalyst exhibits significantly enhanced HER performance. This includs the smallest reported overpotential at 10 mA cm(-2) (4.5 mV), the highest mass activity at 10 mV (1.12 A mg(Ir)(-1)) and turnover frequency at 25 mV (4.21 H2 s(-1)) by far, outperforming Ir nanoparticles and commercial Pt/C

Bifunctional non-noble metal oxide nanoparticle electrocatalysts through lithium-induced conversion for overall water splitting

Developing earth-abundant, active and stable electrocatalysts which operate in the same electrolyte for water splitting, including oxygen evolution reaction and hydrogen evolution reaction, is important for many renewable energy conversion processes. Here we demonstrate the improvement of catalytic activity when transition metal oxide (iron, cobalt, nickel oxides and their mixed oxides) nanoparticles (~20 nm) are electrochemically transformed into ultra-small diameter (2–5 nm) nanoparticles through lithium-induced conversion reactions. Different from most traditional chemical syntheses, this method maintains excellent electrical interconnection among nanoparticles and results in large surface areas and many catalytically active sites. We demonstrate that lithium-induced ultra-small NiFeOx nanoparticles are active bifunctional catalysts exhibiting high activity and stability for overall water splitting in base. We achieve 10 mA cm−2 water-splitting current at only 1.51 V for over 200 h without degradation in a two-electrode configuration and 1 M KOH, better than the combination of iridium and platinum as benchmark catalysts.open10

The MoS2 Nanotubes with Defect-Controlled Electric Properties

We describe a two-step synthesis of pure multiwall MoS2 nanotubes with a high degree of homogeneity in size. The Mo6S4I6 nanowires grown directly from elements under temperature gradient conditions in hedgehog-like assemblies were used as precursor material. Transformation in argon-H2S/H2 mixture leads to the MoS2 nanotubes still grouped in hedgehog-like morphology. The described method enables a large-scale production of MoS2 nanotubes and their size control. X-ray diffraction, optical absorption and Raman spectroscopy, scanning electron microscopy with wave dispersive analysis, and transmission electron microscopy were used to characterize the starting Mo6S4I6 nanowires and the MoS2 nanotubes. The unit cell parameters of the Mo6S4I6 phase are proposed. Blue shift in optical absorbance and metallic behavior of MoS2 nanotubes in two-probe measurement are explained by a high defect concentration

Self-optimizing, highly surface-active layered metal dichalcogenide catalysts for hydrogen evolution

Low-cost, layered transition-metal dichalcogenides (MX_2) based on molybdenum and tungsten have attracted substantial interest as alternative catalysts for the hydrogen evolution reaction (HER). These materials have high intrinsic per-site HER activity; however, a significant challenge is the limited density of active sites, which are concentrated at the layer edges. Here we unravel electronic factors underlying catalytic activity on MX_2 surfaces, and leverage the understanding to report group-5 MX_2 (H-TaS_2 and H-NbS_2) electrocatalysts whose performance instead mainly derives from highly active basal-plane sites, as suggested by our first-principles calculations and performance comparisons with edge-active counterparts. Beyond high catalytic activity, they are found to exhibit an unusual ability to optimize their morphology for enhanced charge transfer and accessibility of active sites as the HER proceeds, offering a practical advantage for scalable processing. The catalysts reach 10 mA cm^(−2) current density at an overpotential of ∼50–60 mV with a loading of 10–55 μg cm^(−2), surpassing other reported MX2 candidates without any performance-enhancing additives