Etude phenomenologique sur la convection naturelle au dessus d’un disque rainure par voie optique

Parmi toutes les méthodes expérimentales, l’optique a toujours occupé une place de choix grâce à son caractère non intrusif : la traversée d’un écoulement par un faisceau lumineux n’entraine pas de perturbation dans les conditions requises par la visualisation ou la mesure. C’est ce qui explique l’importance de la technique que nous allons décrire. Cette étude vise la mise en place d'un banc d'essai en vue de visualiser et traiter numériquement la convection naturelle induite par un disque rainuré et chauffée par le bas dans un système ouvert. La méthode de visualisation choisie est l'ombroscopie comme méthode non intrusive afin de ne pas perturber la convection. Il est utile aussi de rappeler que cette dernière technique délivre en fait des images qu'il faudra lire et éventuellement traiter. Ainsi, dans pratiquement tous les cas de contrôle optique, il faut, pour obtenir des images reconstituées de bonne qualité et envisager une vision nette, mettre en oeuvre un système élaboré de traitement d'images. Ce système a pour premier but d'améliorer la qualité de l'image sur le plan du contraste et du niveau de bruit; il doit en seconde lieu très souvent prendre en compte la morphologie des objectifs recherchés afin de rendre l'image reconstituée parfaitement exploitable.Mots clés: Convection naturelle, Disque rainuré, Ombroscopie, Traitement d’image, thermographi

RAFT Aqueous Dispersion Polymerization of N -(2-(Methacryloyloxy)ethyl)pyrrolidone: A Convenient Low Viscosity Route to High Molecular Weight Water-Soluble Copolymers

RAFT solution polymerization of N-(2-(methacryoyloxy)ethyl)pyrrolidone (NMEP) in ethanol at 70 °C was conducted to produce a series of PNMEP homopolymers with mean degrees of polymerization (DP) varying from 31 to 467. Turbidimetry was used to assess their inverse temperature solubility behavior in dilute aqueous solution, with an LCST of approximately 55 °C being observed in the high molecular weight limit. Then a poly(glycerol monomethacylate) (PGMA) macro-CTA with a mean DP of 63 was chain-extended with NMEP using a RAFT aqueous dispersion polymerization formulation at 70 °C. The target PNMEP DP was systematically varied from 100 up to 6000 to generate a series of PGMA63–PNMEPx diblock copolymers. High conversions (≥92%) could be achieved when targeting up to x = 5000. GPC analysis confirmed high blocking efficiencies and a linear evolution in Mn with increasing PNMEP DP. A gradual increase in Mw/Mn was also observed when targeting higher DPs. However, this problem could be minimized (Mw/Mn < 1.50) by utilizing a higher purity grade of NMEP (98% vs 96%). This suggests that the broader molecular weight distributions observed at higher DPs are simply the result of a dimethacrylate impurity causing light branching, rather than an intrinsic side reaction such as chain transfer to polymer. Kinetic studies confirmed that the RAFT aqueous dispersion polymerization of NMEP was approximately four times faster than the RAFT solution polymerization of NMEP in ethanol when targeting the same DP in each case. This is perhaps surprising because both 1H NMR and SAXS studies indicate that the core-forming PNMEP chains remain relatively solvated at 70 °C in the latter formulation. Moreover, dissolution of the initial PGMA63–PNMEPx particles occurs on cooling from 70 to 20 °C as the PNMEP block passes through its LCST. Hence this RAFT aqueous dispersion polymerization formulation offers an efficient route to a high molecular weight water-soluble polymer in a rather convenient low-viscosity form. Finally, the relatively expensive PGMA macro-CTA was replaced with a poly(methacrylic acid) (PMAA) macro-CTA. High conversions were also achieved for PMAA85–PNMEPx diblock copolymers prepared via RAFT aqueous dispersion polymerization for x ≤ 4000. Again, better control was achieved when using the 98% purity NMEP monomer in such syntheses

Dynamics of Diblock Copolymers in Dilute Solutions

We consider the dynamics of freely translating and rotating diblock (A-B), Gaussian copolymers, in dilute solutions. Using the multiple scattering technique, we have computed the diffusion and the friction coefficients D_AB and Zeta_AB, and the change Eta_AB in the viscosity of the solution as functions of x = N_A/N and t = l_B/l_A, where N_A, N are the number of segments of the A block and of the whole copolymer, respectively, and l_A, l_B are the Kuhn lengths of the A and B blocks. Specific regimes that maximize the efficiency of separation of copolymers with distinct "t" values, have been identified.Comment: 20 pages Revtex, 7 eps figures, needs epsf.tex and amssymb.sty, submitted to Macromolecule

SANS polarization analysis with nuclear-spin-polarized He-3

A neutron spin filter based on transmission through nuclear-spin-polarized He-3 gas has been applied to polarization analysis of small angle neutron scattering (SANS). Such spin filters, which are based on the large spin dependence of the absorption of neutrons by He-3, make SANS polarization analysis possible because of their large angular acceptance. In the present experiment, a He-3-based analyzer was employed to separate nuclear scattering into its coherent and spin-incoherent components. Polarized He-3 analyzers were prepared by two different optical pumping methods and installed on the NG3 SANS instrument at the NIST Center for Neutron Research (NCNR). Measurements were taken on cellophane tape and silica gel, for which the scattering is almost completely incoherent and coherent, respectively, and on a combined sample. For the combined sample, separation of the coherent part from the incoherent part was successfully demonstrated using polarization analysis

ABC Triblock Copolymer Worms: Synthesis, Characterization, and Evaluation as Pickering Emulsifiers for Millimeter-Sized Droplets

Polymerization-induced self-assembly (PISA) is used to prepare linear poly(glycerol monomethacrylate)–poly(2-hydroxypropyl methacrylate)–poly(benzyl methacrylate) [PGMA–PHPMA–PBzMA] triblock copolymer nano-objects in the form of a concentrated aqueous dispersion via a three-step synthesis based on reversible addition–fragmentation chain transfer (RAFT) polymerization. First, GMA is polymerized via RAFT solution polymerization in ethanol, then HPMA is polymerized via RAFT aqueous solution polymerization, and finally BzMA is polymerized via “seeded” RAFT aqueous emulsion polymerization. For certain block compositions, highly anisotropic worm-like particles are obtained, which are characterized by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The design rules for accessing higher order morphologies (i.e., worms or vesicles) are briefly explored. Surprisingly, vesicular morphologies cannot be accessed by targeting longer PBzMA blocks—instead, only spherical nanoparticles are formed. SAXS is used to rationalize these counterintuitive observations, which are best explained by considering subtle changes in the relative enthalpic incompatibilities between the three blocks during the growth of the PBzMA block. Finally, the PGMA–PHPMA–PBzMA worms are evaluated as Pickering emulsifiers for the stabilization of oil-in-water emulsions. Millimeter-sized oil droplets can be obtained using low-shear homogenization (hand-shaking) in the presence of 20 vol % n-dodecane. In contrast, control experiments performed using PGMA–PHPMA diblock copolymer worms indicate that these more delicate nanostructures do not survive even these mild conditions

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre-road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force. The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficien