A Straightforward Framework for Road Network Screening to Lombardy Region (Italy)

It is not possible to deal with sustainable mobility without considering road safety as a key element: Target 3.6 of the Sustainable Development Goals aims at halving the number of road deaths by 2030. To do so, further effort and effective tools are required for road authorities, to implement improvement measures and enhance road safety for all. Road network screening (RNS) is the first step of the whole Road Infrastructure Safety Management (RISM) System process. It is applied to a wide scale to assess the safety performance of the whole road network and identify the worst performing roads (or sites). The literature is quite rich with RNS models and methods, which have greatly improved, recently. Moreover, although many national frameworks on road safety have been issued over time, some barriers remain, specifically related to data quality, such as accurate crash location, which is mainly used to integrate crash data with other databases. In addition, most of these frameworks adopted partial indexes to identify black spots and presented results using fixed maps for visualization. This paper fills these gaps by the proposal of a straightforward operational framework to perform RNS, based on a simple and flexible rationale to integrate raw crash, traffic, and road data. Specifically, the framework: (i) manages crash location data, without relying on plane or geographical coordinates, which are missing or inaccurate and still are a crucial issue in many European countries such as Italy; (ii) adopts an adjusted accident cost rate index that integrates frequency and severity of crashes as well as a measurement of exposure; (iii) introduces variable maps that show the results at different jurisdiction levels. A relevant case study demonstrates the usefulness of this framework using 30,000+ crash data of the whole non-urban road network of the Lombardy Region (Northern Italy). Road authorities could adopt this framework to perform an accurate safety screening on the overall regional road network. Moreover, this framework could be implemented in a road traffic safety managerial system to better prioritise safety interventions within a tight budget and help achieve sustainable development targets

Sustainable cycle-tourism for society: Integrating multi-criteria decision-making and land use approaches for route selection

Cycle tourism is a sustainable active vacation, which is quickly growing in recent years. Although it has several benefits for society and users (e.g., social connections, amusement, and physical and mental health), cycle tourism requires an adequate route network to enjoy destinations with historical and landscape peculiarities. Past literature mainly investigated motivations and preferences for cycle tourists and proposed optimisation methods in planning routes. However, applying assessment methods for prioritising cycle-tourist routes is a seldom-explored topic. This study aims to address this gap by applying an integrated method for evaluating and prioritising cycle routes, searching for a compromise between route characteristics, service provided to users, and natural and building contexts crossed. It jointly includes Multi-Criteria Decision Methods (MCDMs) and a land use approach: AHP determines the weights of criteria and parameters describing cycle routes; GIS elaborates spatial analysis of parameters; ELECTRE I and VIKOR help find a compromise solution amongst different cycle routes. The integrated method involved a panel of experts to collect data, and it is applied to the wide-study area of Franciacorta (Italy). Some comparisons with other MCDMs are made to justify the results. The findings could support multi-institutions prioritising cycle route alternatives in deciding their building

Bridge's vehicular loads characterization through Weight-In-Motion (WIM) systems. The case study of Brescia

The growing traffic flow and the increase in transported masses negatively affect infrastructural safety. Several authors have characterized traffic loads on bridges in the American and Chinese context using Weigh-in-Motion (WIM) systems. Conversely, very few studies have been carried out in Europe and, as far as the authors know, none in Italy. This study covers this gap by providing a statistical analysis of raw WIM data collected on a main bridge near the city of Brescia (Italy). First, the traffic flow and the characteristics of vehicles were gathered by a WIM device. Second, some descriptive statistics were performed by computing the probabilistic distributions of numerous vehicular attributes. Third, as a novelty element, a K-means based Clustering technique was adopted on a wide set of vehicular features to detect heavy vehicle clusters. The results showed the existence of three main clusters: two predominately composed by lightly overloaded ordinary vehicles and construction machinery, respectively, and one by mass exceptional vehicles. This study considers a broader set of vehicular parameters than previous ones and then, provides a deeper understanding. Moreover, it shows that axle mass limits violations are noteworthy among mass exceptional vehicles in Italy highlighting the need of improving weight enforcement. These knowledges will be crucial for a rational organisation of the existing assets

Comparing the vibrational behaviour of e-kick scooters and e-bikes: Evidence from Italy

E-kick scooters are currently among the most popular emerging electric-powered Personal micro–Mobility Vehicles (e-PMVs) and have recently been equated to e-bikes. However, even if the dynamic behaviour of e-bikes is well studied, much less has been done to understand the behaviour of e-kick scooters. Furthermore, comparisons between the two vehicles have rarely been investigated and only based on mechanical models. This study covers this gap by proposing a novel framework that evaluates the vibrational behaviours of both vehicles when driven by different users and exposed to the pavement irregularities, using both real and simulated data. The experimental data are collected equipping an e-kick scooter and an e-bike with Inertial Measurement Units, and then processed by ISO 2631–1 method to obtain an objective evaluation of the comfort. Next, the experimental data are expanded to include uncertainty applying a Monte Carlo Simulation based on a two-layer feed-forward Artificial Neural Network. Afterwards, several statistical analyses are performed to understand the key factors affecting the vibrational magnitude (and their extent) for each vehicle. This framework was tested in an Italian city (Brescia) along urban paths with five different pavement surfaces. The results showed that the e-kick scooter appears to be globally more solicited than the e-bike in terms of vibrational magnitude. Moreover, pavement surface, sensor position, user gender, user height, and travel speed are identified as crucial factors explaining the vibrational magnitude for both vehicles. The overall findings challenge the recent European regulations that equated e-kick scooters with bikes. These findings may help public administrations in planning the circulation of e-bikes and e-kick scooters in cities and recommend that manufacturers improve the e-kick scooter design by including shock absorbers to increase comfort

Measuring Safety Performance in the extra-urban Road Network of Lombardy Region (Italy)

Road Network Screening (RNS) is a process to evaluate the safety performance of the whole road network and identify worst performing roads. Currently, literature provides many models and methods for RNS. Moreover, several frameworks of RNS were issued at the European National Level over time. However, even if sophisticated models and methods could be preferable for their computational accuracy, they may be far from the capabilities of practitioners. In addition, other issues such as availability of operative attributes and data quality and processing persist. For instance, accurate crash location, which is crucial for detailed analyses of high crash rates at some locations, is still an issue: many road administrations pointed out that coordinates miss or are inaccurate in many cases. Within this context, this paper proposes a straightforward operational framework to evaluate safety performance for RNS, using a flexible rationale that integrates crash, traffic, and road data, respectively. More precisely, this framework: (a) handles crash location data without using spatial coordinates; (b) computes the crash rate index at different administrative levels; (c) shows results by Geographic Information System (GIS) maps. This framework is applied to the whole extra-urban road network of the Lombardy Region (Northern Italy) using 30.000+ crash data provided by the Regional Institute for Lombardy Policy Support (PoliS). Road authorities could adopt this framework to perform an accurate safety screening on the road network aimed at rational planning of safety interventions

Kinematic performance of micro-mobility vehicles during braking: experimental analysis and comparison between e-kick scooters and bikes

According to the Italian legislation, e-kick scooters and bikes are considered a single category of vehicles and can travel on the same infrastructures with the same rules; however, their kinematic behavior is very different. The adoption of a bike as a vehicle for covering short distances i.e., within 5 km is widely known both at the kinematic level and for its use by users. Conversely, e-kick scooters are "unknown" vehicles both for their kinematic characteristics and for their use by users. A handful of studies have shown how the behavior of e-kick scooters and bikes is very different; however, there are not many studies that analyze the different kinematic behavior of e-kick scooters and bikes. This study presents an experimental analysis that evaluates braking behavior by comparing e-kick scooters and traditional bikes according to several vehicle speeds. These analyzes help build a probabilistic mathematical model for estimating the stopping space of e-kick scooters and bikes. The availability of this model is crucial for the design of safe intersections between cycle paths and roads intended for motor vehicle traffic. Moreover, this model may reveal insights that could challenge the recent European regulations that equated e-kick scooters as bikes

A comparative cycling path selection for sustainable tourism in Franciacorta. An integrated AHP-ELECTRE method

Cycle tourism is a form of sustainable itinerant tourism expanding in Italy and the rest of the world, with prospects for growth in coming years. Europe and North America have already developed a wide range of cycling infrastructures tied to tourism experiences. Benefits induced are generally recognised: first, it is a sustainable solution that increases local economics while conserving the environment; second, it guarantees advantages on social connections, amusement, and physical and mental health. However, it requires an adequate network to enjoy destinations as historical and landscape peculiarities. Currently, literature provides some methods for planning itineraries dedicated to cycle tourism. Despite that, there is less attention on how evaluating existing or already planned tourist itineraries. This study covers this gap, by applying an integrated method to assess bicycle connections for tourism experiences within municipalities. Since this evaluation may contain many conflicting criteria (e.g., preferences of public administrator, technical and economic viability) and possible alternatives, this study frames the method as a multi-criteria decision-making problem (MCDM). Specifically, at first, the Analytical Hierarchy Process (AHP) is adopted to calculate weights for each criterium; next, the ELimination Et Choix Traduisant la REalitè (ELECTRE) method is applied to provide a (possible) priority ranking of cycling tourist paths among alternatives, by computing indices of discordance and concordance between pairs of alternatives. The framework is applied to the Franciacorta area (North-East Italy), a national and international tourist relevance territory encompassing 22 municipalities. This study may be useful for public administrators to rationalise and prioritise cycling routes

A new methodology for accidents analysis: The case of the state road 36 in Italy

6noEvery year more than 1.35 million people die for road accidents and several million suffer serious injuries, which force them to live with compromised health conditions. Over the last decades, road safety research has focused on improving modelling techniques. However, due to the lack of expertise and statistical skills, such approaches might not be used by local authorities and road managers for road safety evaluation purposes. This paper proposes an operational methodology to analyze road accidents with the aim of increasing road safety. More specifically, the methodology enables to identify the most critical road segments to prioritize economic resources allocation accordingly. By using the data collected by the Road Police Department of Lombardy Region (in Italy) from 2014 to 2018, this methodology has been successfully applied to State Road 36, which is recognized as one of the busiest roads in Italy with a very high number of accidents occurring every year. The proposed methodology may support public administrations and road managers - involved in the definition and implementation of safety measures - to reduce the number of road accidents identifying and implementing prioritized interventions. Moreover, the methodology is general enough to be applied to each segment of a generic road infrastructure.openopenBorghetti F.; Marchionni G.; De Bianchi M.; Barabino B.; Bonera M.; Caballini C.Borghetti, F.; Marchionni, G.; De Bianchi, M.; Barabino, B.; Bonera, M.; Caballini, C

Real-time evaluation of the on-board comfort of standing passenger in bus transit services

Bus on-board comfort may be intended as a multidimensional concept declined according to several attributes (e.g., vibrations, the load factor, the driving style, etc.) and represents a key factor of service quality. Thus, its measurement is crucial for public transport companies as it can support for the monitoring, evaluation and implementation of specific actions to improve their services. The objective of this paper is to build a numerical scale for real-time measurement of bus on-board comfort. This is pursued integrating subjective measurements of the driving style provided by the passengers with objective ones of longitudinal and transversal accelerations data collected by Intelligent Transportation System tools. The results are very useful because they represent a contribution to establish a comfort scale in a real operational environment, as a tool to regulate the driver's behavior: each driver is in the position of real-time monitoring the quality of a bus ride regarding on-board comfort level

Can a genetically-modified organism-containing diet influence embryo development? A preliminary study on pre-implantation mouse embryos

In eukaryotic cells, pre-mRNAs undergo several transformation steps to generate mature mRNAs. Recent studies have demonstrated that a diet containing a genetically modified (GM) soybean can induce modifications of nuclear constituents involved in RNA processing in some tissues of young, adult and old mice. On this basis, we have investigated the ultrastructural and immunocytochemical features of pre-implantation embryos from mice fed either GM or non- GM soybean in order to verify whether the parental diet can affect the morpho-functional development of the embryonic ribonucleoprotein structural constituents involved in premRNA pathways. Morphological observations revealed that the general aspect of embryo nuclear components is similar in the two experimental groups. However, immunocytochemical and in situ hybridization results suggest a temporary decrease of pre-mRNA transcription and splicing in 2-cell embryos and a resumption in 4-8-cell embryos from mice fed GM soybean; moreover, pre-mRNA maturation seems to be less efficient in both 2-cell and 4-8-cell embryos from GM-fed mice than in controls. Although our results are still preliminary and limited to the pre-implantation phases, the results of this study encourage deepening on the effects of food components and/or contaminants on embryo development