Quantitative Analysis Procedure for Building Materials in Historic Buildings by Applying Infrared Thermography

[EN] Historic buildings have a great cultural and architectural value. It is necessary to analyze their state of conservation, but sometimes it is difficult to perform laboratory tests without damaging this heritage. In the field of architecture, infrared thermography is usually used to provide descriptive information about the surface temperature of building materials. This current research presents a methodology widely applicable to historic buildings. As an example of application, the study is focused in the Seminary-School of Corpus Christi of Valencia (Spain), a very outstanding building from the 16th Century. This research presents an analytical study to be able to differentiate the temperature distribution of all pixels of a thermographic image. Thermal images are a matrix of data and their study helps us in decision-making based on objective data.Lerma Elvira, C.; Mas Tomas, MDLA.; Gil Benso, E.; Vercher Sanchis, JM.; Torner-Feltrer, MEM. (2018). Quantitative Analysis Procedure for Building Materials in Historic Buildings by Applying Infrared Thermography. Russian Journal of Nondestructive Testing. 54(8):601-609. https://doi.org/10.1134/S1061830918080065S601609548Avdelidis, N.P. and Moropoulou, A., Applications of infrared thermography for the investigation of historic structures, J. Cult. Heritage, 2004, no. 5, pp. 119–127. doi 10.1016/j.culher.2003.07.002Barreira, E. and Freitas, V., Evaluation of building materials using infrared thermography, Constr. Build. Mater., 2007, vol. 21, pp. 218–224. doi 10.1016/j.conbuildmat.2005.06.049Bauer, E., Pavón, E., Barreira, E., and Kraus, E., Analysis of building façade defects using infrared thermography: Laboratory studies, J. Build. Eng., 2016, no. 6, pp. 93–104. doi /doi 10.1016/j.jobe.2016.02.012Binda, L., Cardani, G., and Zanzi, L., Nondestructive testing evaluation of drying process in flooded full-scale masonry walls, J. Perform. Constr. Facil., 2010, pp. 473–483. doi 10.1061/(ASCE)CF.1943-5509.0000097Cañas, I., Martín, S., and González, I., Thermal-physical aspects of materials used for the construction of rural buildings in Soria (Spain), Construct. Build. Mater., 2005, vol. 19, pp. 197–211. doi 10.1016/j.conbuildmat. 2004.05.016Carlomagno, G.M., Maio, R., Fedi, M., Meola, C., Integration of infrared thermography and high-frequency electromagnetic methods in archaeological surveys, J. Geophys. Eng., 2011, vol. 8, pp. 93–105. doi 10.1088/1742-2132/8/3/S09Cerdeira, F., Vázquez, ME, Collado, J., and Granada, E., Applicability of infrared thermography to the study of the behavior of Stone panels as building envelopes, Energy Build., 2011, vol. 43, pp. 1845–1851. doi 10.1016/j.enbuild.2011.03.029EN 13187:1998. Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method (ISO 6781:1983 modified).Galarza Tortajada, M., La tapia valenciana: una técnica constructiva poco conocida, Proc. First Natl. Congr. Construct. Hist., Madrid, 1996.Grinzato, E., Bison, P.G., and Marinetti, S., Monitoring of ancient buildings by the thermal method, J. Cult. Heritage, 2002, vol. 3, pp. 21–29. doi 10.1016/S1296-2074(02)01159-7Ibarra-Castanedo C., Sfarra, S., Ambrosini, D., Paoletti, D., Bendada, A, and Maldague, X., Diagnostics of panel paintings using holographic interferometry and pulsed thermography, Quant. Infrared Thermogr. J., 2010, vol. 7, no. 1. doi 10.3166/qirt.7.85-114Lagüela, S., Martínez, J., Armesto, J., and Arias, P., Energy efficiency studies through 3D laser scanning and thermographic technologies, Energy Build., 2011, vol. 43, pp. 1216–1221. doi 10.1016/j.enbuild.2010.12.031Lerma, C., Mas, Á., Gil, E., and Galiana, M., An analytical procedure for the study of the documented construction process of the Seminary-School of Corpus Christi in Valencia (Spain), Inf. Constr., 2014, vol. 66 (533), e007. doi 10.3989/ic.12.117Lerma, C., Mas, A., Gil, E., Vercher, J., and Penalver, M.J., Pathology of building materials in historic buildings. Relationship between laboratory testing and infrared thermography, Mater. Constr., 2014, vol. 64 (313), e009. doi 10.3989/mc.2013.06612Lerma, J.L., Cabrelles, M., and Portalés, C., Multitemporal thermal analysis to detect moisture on a building façade, Construct. Build. Mater., 2011, vol. 25, pp. 2190–2197. doi 10.1016/j.conbuildmat.2010.10.007Madruga, F.J., Ibarra-Castanedo, C., Conde, O., López-Higuera, J.M., and Maldague, X., Infrared thermography processing based on higher-order statistics, NDT&E Int., 2010, vol. 43, pp. 661–666. doi 10.1016/j.ndteint.2010.07.002Meola, C., Infrared thermography of masonry structures, Infrared Phys. Technol., 2007, vol. 49, no. 3, pp. 228–33. doi 10.1016/j.infraredPosta, J., Dolejs, J., Non-destructive assessment of timber elements with an emphasis on radiometry., Intern. J. Arch. Herit., 2015, vol. 9, no.6.Válek, J., Kruschwitz, S., Wöstmann, J., Kind, T., Valach, J., Köpp, C., and Lesák, J., Nondestructive investigation of wet building material: Multimethodological approach, J. of performance of Constructed Facilities, pp. 462–472. doi 10.1061/(ASCE)CF.1943-5509.000005

Quantitative thermal imaging analysis of aircraft materials: through skin sensing (Invited Paper)

Thermal non-destructive testing (NDT) is commonly used for assessing aircraft structures. This research work evaluates the potential of pulsed -- transient thermography for locating fixtures beneath aircraft skins in order to facilitate accurate automated assembly operations. Representative aluminium and carbon fibre aircraft skin-fixture assemblies were modelled using thermal modelling software. The assemblies were also experimentally investigated with an integrated pulsed thermographic evaluation system, as well as using a custom built system incorporating a miniature un-cooled camera. Modelling showed that the presence of an air gap between skin and fixture significantly reduced the thermal contrast developed, especially in aluminium. Experimental results show that fixtures can be located to accuracies of 0.5 mm

Quantitative pulsed phase thermography applied to steel plates

Pulsed Phase Thermography (PPT) has been proven effective on depth retrieval of flat-bottomed holes in different materials such as plastics and aluminum. In PPT, amplitude and phase delay signatures are available following data acquisition (carried out in a similar way as in classical Pulsed Thermography), by applying a transformation algorithm such as the Fourier Transform (FT) on thermal profiles. The authors have recently presented an extended review on PPT theory, including a new inversion technique for depth retrieval by correlating the depth with the blind frequency fb (frequency at which a defect produce enough phase contrast to be detected). An automatic defect depth retrieval algorithm had also been proposed, evidencing PPT capabilities as a practical inversion technique. In addition, the use of normalized parameters to account for defect size variation as well as depth retrieval from complex shape composites (GFRP and CFRP) are currently under investigation. In this paper, steel plates containing flat-bottomed holes at different depths (from 1 to 4.5 mm) are tested by quantitative PPT. Least squares regression results show excellent agreement between depth and the inverse square root blind frequency, which can be used for depth inversion. Experimental results on steel plates with simulated corrosion are presented as well. It is worth noting that results are improved by performing PPT on reconstructed (synthetic) rather than on raw thermal data

Use of thermography and fibre optics microscopy for the evaluation of railway structures in the Athens Metro in Greece (Invited Paper)

Rolling Contact Fatigue (RCF) is one of the main issues that concern, at least initially, the head of the railway; progressively they can be of very high importance as they can propagate inside the material with the risk of damaging the railway. In this work, two different non-destructive techniques, infrared thermography (IRT) and fibre optics microscopy (FOM), were used in the inspection of railways for the tracing of defects and deterioration signs. In the first instance, two different approaches (dynamic and pulsed thermography) were used, whilst in the case of FOM, microscopic characterisation of the railway heads and classification of the deterioration -- damage on the railways according to the UIC (International Union of Railways) code, took place. Results from both techniques are presented and discussed

Detection and characterization of exercise induced muscle damage (EIMD) via thermography and image processing

Exercise induced muscle damage (EIMD), is usually experienced in i) humans who have been physically inactive for prolonged periods of time and then begin with sudden training trials and ii) athletes who train over their normal limits. EIMD is not so easy to be detected and quantified, by means of commonly measurement tools and methods. Thermography has been used successfully as a research detection tool in medicine for the last 6 decades but very limited work has been reported on EIMD area. The main purpose of this research is to assess and characterize EIMD, using thermography and image processing techniques. The first step towards that goal is to develop a reliable segmentation technique to isolate the region of interest (ROI). A semi-automatic image processing software was designed and regions of the left and right leg based on superpixels were segmented. The image is segmented into a number of regions and the user is able to intervene providing the regions which belong to each of the two legs. In order to validate the image processing software, an extensive experimental investigation was carried out, acquiring thermographic images of the rectus femoris muscle before, immediately post and 24, 48 and 72 hours after an acute bout of eccentric exercise (5 sets of 15 maximum repetitions), on males and females (20-30 year-old). Results indicate that the semi-automated approach provides an excellent bench-mark that can be used as a clinical reliable tool. © 2017 SPIE

NDTs in the monitoring and preservation of historical architectural surfaces

Diagnosis and post intervention monitoring are central action in a new approach related to the conservation and maintenance of architectural surfaces, which takes into account not only the restoration moment, but also the behaviour of the materials over time. In this regard, ND techniques could give a significant contribution in the definition of the conservation state. This paper collects part of the authors experience in regard to NDTs used in the monitoring of historical surfaces and in the study of the transformation during CH maintenance. Furthermore, it deals with the problem of the definition of suitable indicators, taking into account the know-how of our research groups in connection to specific case studies