15 research outputs found
Comparative structural response of two steel bridges constructed 100 years apart
This paper presents a comparative numerical analysis of the structural behaviour and seismic performance of two existing steel bridges, the Infiernillo II Bridge and the Pinhao Bridge, one located in Mexico and the other in Portugal. The two bridges have similar general geometrical characteristics, but were constructed 100 years apart. Three-dimensional structural models of both bridges are developed and analysed for various load cases and several seismic conditions. The results of the comparative analysis between the two bridges are presented in terms of natural frequencies and corresponding vibration modes, maximum stresses in the structural elements and maximum displacements. The study is aimed at determining the influence of a 1 century period in material properties, transverse sections and expected behaviour of two quite similar bridges. In addition, the influence of the bearing conditions in the global response of the Pinhao Bridge was evaluated
FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements
This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5% of the total mass. They were in a frequency range up to 1.2Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach