A comparison of yield potential and cultivar performance of 20 collected purslane (Portulaca oleracea L.) accessions employing seeds vs. stem cuttings

A glasshouse experiment was conducted in Universiti Putra Malaysia (UPM) to evaluate the regeneration and yield potential in purslane using both seeds and stem cuttings of 20 collected accessions from different locations in Western Peninsular Malaysia. Analysis results revealed significant variations (P< 0.05) for morphological traits viz., plant height, number of main branches, number of nodes, internodal distance, stem diameter, number of leaves, leaf area, number of flowers, root length, fresh and dry weight but no significant difference were observed for physiological traits viz., total chlorophyll, net photosynthesis, stomatal conductance, transpiration, water vapor deficit and for either major micro or macro minerals. Hope our research findings will eliminate the doubt of using cutting methods for purslane propagation and cultivation among producers and consumers and will promote their determination to follow purslane production in this summer at any season and anywhere. To the best of our knowledge, this is the first attempt to evaluate and to detect any significant variations arising in morphological, physiological, and especially mineral nutrition in purslane propagated through cuttings vs. through seeds

CONTROL SYSTEM OF 10-MEV BABY CYCLOTRON

Abstract For controlling all the equipment and services required for operating the 10 MeV baby cyclotron and optimizing various parameters, an extensive control system is used

A Comparison of Yield Potential and Cultivar Performance of 20 Collected Purslane (Portulaca oleracea L.) Accessions Employing Seeds vs. Stem Cuttings

A glasshouse experiment was conducted in Universiti Putra Malaysia (UPM) to evaluate the regeneration and yield potential in purslane using both seeds and stem cuttings of 20 collected accessions from different locations in Western Peninsular Malaysia. Analysis results revealed significant variations (P< 0.05) for morphological traits viz., plant height, number of main branches, number of nodes, internodal distance, stem diameter, number of leaves, leaf area, number of flowers, root length, fresh and dry weight but no significant difference were observed for physiological traits viz., total chlorophyll, net photosynthesis, stomatal conductance, transpiration, water vapor deficit and for either major micro or macro minerals. Hope our research findings will eliminate the doubt of using cutting methods for purslane propagation and cultivation among producers and consumers and will promote their determination to follow purslane production in this summer at any season and anywhere. To the best of our knowledge, this is the first attempt to evaluate and to detect any significant variations arising in morphological, physiological, and especially mineral nutrition in purslane propagated through cuttings vs. through seeds

Enhancing provision of written medicine information in Australia: Pharmacist, general practitioner and consumer perceptions of the barriers and facilitators

Background: Written medicine information can play an important role in educating consumers about their medicines. In Australia, standardised, comprehensive written information known as Consumer Medicine Information (CMI) is available for all prescription medicines. CMI is reportedly under-utilised by general practitioners (GPs) and community pharmacists in consultations, despite consumer desire for medicine information. This study aimed to determine consumers', GPs' and community pharmacists' preferences for CMI provision and identify barriers and facilitators to its use. Method. Structured questionnaires were developed and administered to a national sample of Australian consumers (phone survey), community pharmacists and GPs (postal surveys) surrounding utilisation of CMI. Descriptive and comparative analyses were conducted. Results: Half of consumers surveyed wanted to receive CMI for their prescription medicine, with spoken information preferable to written medicine information for many consumers and healthcare professionals. GPs and pharmacists remained a preferred source of medicine information for consumers, although package inserts were appealing to many among all three cohorts. Overall pharmacists were the preferred provider of CMI primarily due to their medicine expertise, accessibility and perceived availability. GPs preferred CMI dissemination through both the GP and pharmacist. Some consumers preferred GPs as the provider of medicines information because of their knowledge of the patients' medicines and/or medical history, regularity of seeing the patient and good relationship with the patient. Common barriers to CMI provision cited included: time constraints, CMI length and perceptions that patients are not interested in receiving CMI. Facilitators to enhance provision included: strategies to increase consumer awareness, longer consultation times and counseling appointments, and improvements to pharmacy software technology and workflow. Conclusion: Medicine information is important to consumers, whether as spoken, written or a combination of both. A tailored approach is needed to ascertain individual patient preference for delivery and scope of medicine information desired so that appropriate information is provided. The barriers of time and perceived attitudes of healthcare practitioners present challenges which may be overcome through changes to workplace practices, adoption of identified facilitators, and education about the positive benefits of CMI as a tool to engage and empower patients

Development of a 3D workspace Shoulder Assessment Tool Incorporating Electromyography and an Inertial Measurement Unit - A preliminary study

Traditional shoulder Range of Movement (ROM) measurement tools suffer from inaccuracy or from long experimental set-up times. Recently, it has been demonstrated that relatively low-cost wearable inertial measurement unit (IMU) sensors can overcome many of the limitations of traditional motion tracking systems. The aim of this study is to develop and evaluate a single IMU combined with an Electromyography (EMG) sensor to monitor the 3D reachable workspace with simultaneous measurement of deltoid muscle activity across the shoulder ROM. Six volunteer subjects with healthy shoulders and one participant with a ‘frozen’ shoulder were recruited to the study. Arm movement in 3D space was plotted in spherical coordinates while the relative EMG intensity of any arm position is presented graphically. The results showed that there was an average ROM surface area of 27291±538 deg2 among all six healthy individuals and a ROM surface area of 13571±308 deg2 for the subject with frozen shoulder. All three sections of the deltoid show greater EMG activity at higher elevation angles. Using such tools enables individuals, surgeons and physiotherapists to measure the maximum envelope of motion in conjunction with muscle activity in order to provide an objective assessment of shoulder performance in the voluntary 3D workspace

Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees

Efficient walking or running requires symmetrical gait. Gait symmetry is one of the key factors in efficient human dynamics, kinematics and kinetics. The desire of individuals with a lower-limb amputation to participate in sports has resulted in the development of energy-storing and-returning (ESR) feet. This paper analyses a case study to show the effect of symmetry and asymmetry as well as energy transfer efficiency during periodic jumping between simulated bilateral and unilateral runners. A custom gait analysis system is developed as part of this project to track the motion of the body of a physically active subject during a set of predefined motions. Stance and aerial times are accurately measured using a high speed camera. Gait frequency, the level of symmetry and the non-uniform displacement between left and right foot and their effects on the position of the Centre of Mass (CM) were used as criteria to calculate both peak energies and transformation efficiency. Gait asymmetry and discrepancy of energy transfer efficiency between the intact foot and the ESR are observed. It is concluded that unilateral runners require excessive effort to compensate for lack of symmetry as well as asymmetry in energy transfer, causing fatigue which could be a reason why bilateral amputee runners using ESR feet have a superior advantage over unilateral amputees

Genome-Wide Linkage Analysis of Hemodynamic Parameters Under Mental and Physical Stress in Extended Omani Arab Pedigrees:The Oman Family Study

Background: We performed a genome-wide scan in a homogeneous Arab population to identify genomic regions linked to blood pressure (BP) and its intermediate phenotypes during mental and physical stress tests. Methods: The Oman Family Study subjects (N = 1277) were recruited from five extended families of similar to 10 generations. Hemodynamic phenotypes were computed from beat-to-beat BP, electrocardiography and impedance cardiography. Multi-point linkage was performed for resting, mental (word conflict test, WCT) and cold pressor (CPT) stress and their reactivity scores (Delta), using variance components decomposition-based methods implemented in SOLAR. Results: Genome-wide scans for BP phenotypes identified quantitative trait loci (QTLs) with significant evidence of linkage on chromosomes 1 and 12 for WCT-linked cardiac output (LOD = 3.1) and systolic BP (LOD = 3.5). Evidence for suggestive linkage for WCT was found on chromosomes 3, 17 and 1 for heart rate (LOD = 2.3), DBP (LOD = 2.4) and left ventricular ejection time (LVET), respectively. For Delta WCT, suggestive QTLs were detected for CO on chr11 (LOD = 2.5), LVET on chr3 (LOD = 2.0) and EDI on chr9 (LOD = 2.1). For CPT, suggestive QTLs for HR and LVET shared the same region on chr22 (LOD 2.3 and 2.8, respectively) and on chr9 (LOD = 2.3) for SBP, chr7 (LOD = 2.4) for SV and chr19 (LOD = 2.6) for CO. For Delta CPT, CO and TPR top signals were detected on chr15 and 10 (LOD; 2.40, 2.08) respectively. Conclusion: Mental stress revealed the largest number of significant and suggestive loci for normal BP reported to date. The study of BP and its intermediate phenotypes under mental and physical stress may help reveal the genes involved in the pathogenesis of essential hypertension

Heritability and genetic correlations of heart rate variability at rest and during stress in the Oman Family Study

Introduction:Individual differences in heart rate variability (HRV) can be partly attributed to genetic factors that may be more pronounced during stress. Using data from the Oman Family Study (OFS), we aimed to estimate and quantify the relative contribution of genes and environment to the variance of HRV at rest and during stress; calculate the overlap in genetic and environmental influences on HRV at rest and under stress using bivariate analyses of HRV parameters and heart rate (HR).Methods:Time and frequency domain HRV variables and average HR were measured from beat-to-beat HR obtained from electrocardiogram recordings at rest and during two stress tests [mental: Word Conflict Test (WCT) and physical: Cold Pressor Test (CPT)] in the OFS - a multigenerational pedigree consisting of five large Arab families with a total of 1326 participants. SOLAR software was used to perform quantitative genetic modelling.Results:Heritability estimates for HRV and HR ranged from 0.11 to 0.31 for rest, 0.09-0.43 for WCT, and 0.07-0.36 for CPT. A large part of the genetic influences during rest and stress conditions were shared with genetic correlations ranging between 0.52 and 0.86 for rest-WCT and 0.60-0.92 for rest-CPT. Nonetheless, genetic rest-stress correlations for most traits were significantly smaller than 1 indicating some stress-specific genetic effects.Conclusion:Genetic factors significantly influence HRV and HR at rest and under stress. Most of the genetic factors that influence HRV at rest also influence HRV during stress tests, although some unique genetic variance emerges during these challenging conditions