1,612 research outputs found
Description of nuclear systems with a self-consistent configuration-mixing approach. I: Theory, algorithm, and application to the C test nucleus
Although self-consistent multi-configuration methods have been used for
decades to address the description of atomic and molecular many-body systems,
only a few trials have been made in the context of nuclear structure. This work
aims at the development of such an approach to describe in a unified way
various types of correlations in nuclei, in a self-consistent manner where the
mean-field is improved as correlations are introduced. The goal is to reconcile
the usually set apart Shell-Model and Self-Consistent Mean-Field methods. This
approach is referred as "variational multiparticle-multihole configuration
mixing method". It is based on a double variational principle which yields a
set of two coupled equations that determine at the same time the expansion
coefficients of the many-body wave function and the single particle states. The
formalism is derived and discussed in a general context, starting from a
three-body Hamiltonian. Links to existing many-body techniques such as the
formalism of Green's functions are established. First applications are done
using the two-body D1S Gogny effective force. The numerical procedure is tested
on the C nucleus in order to study the convergence features of the
algorithm in different contexts. Ground state properties as well as
single-particle quantities are analyzed, and the description of the first
state is examined. This study allows to validate our numerical algorithm and
leads to encouraging results. In order to test the method further, we will
realize in the second article of this series, a systematic description of more
nuclei and observables obtained by applying the newly-developed numerical
procedure with the same Gogny force. As raised in the present work,
applications of the variational multiparticle-multihole configuration mixing
method will however ultimately require the use of an extended and more
constrained Gogny force.Comment: 22 pages, 18 figures, accepted for publication in Phys. Rev. C. v2:
minor corrections and references adde
Design and development of a test rig for 13.56 MHz IPT systems with synchronous rectification and bidirectional capability
This paper presents the development of a test rig for bidirectional 13.56 MHz wireless power using identical back-to-back Class EF converters. Theoretical principles of bi-directional wireless power are described and an operating chart representing the range of admissible complex voltages induced on the active transmit side is introduced. The implementation is achieved by driving the gate signals of two Class EF coil-drivers from a signal generator, allowing the relative phase of the currents in each coil to be controlled. The rig sets a constant input voltage for each of the two coil-drivers by implementing a source-sink configuration, emulating a bidirectional DC-DC conversion stage at each side. This setup can also be used to test for tuning mismatches and different loading conditions in the back-to-back Class EF configuration. Experimental results include bidirectional wireless power transmission of 20 W across a 13.56 MHz link with 6.56% coupling. The combination of low coupling factors and moderate power levels enables new classes of applications that require large air gaps and tolerance to misalignment such as in micro e-mobility. High efficiency can be maintained despite changes in coupling factors and load since active rectification ensures operation at the resonant point in both tanks
Induced voltage estimation from class EF switching harmonics in HF-IPT systems
One of the advantages of high-frequency inductive power transfer systems is the high tolerance to misalignment and large air-gaps. However, the inherently large magnetic field volumes can lead to coupling of additional foreign objects with the primary, causing possible detuning of the system and heating of the objects. These foreign objects and the conditions of the local environment can load the transmitter, which changes the induced voltage on the primary side. Unfortunately, the induced voltage is not directly measurable in an operating transmitter and the most straightforward way of calculating this variable, through a measurement of primary coil current and voltage, can cause a significant decrease in quality factor which reduces system performance. An integrated solution capable of estimating the induced voltage through other less invasive measurements in the primary is needed to ensure safety of operation through foreign object detection. Knowledge of the induced voltage can also be used to correct tuning mismatches where both sides of the link are active (i.e., in synchronous rectification and bidirectional systems). In this article, multiple candidate variables for estimating the induced voltage are assessed based on factors such as measurement practicality and estimation accuracy. It is demonstrated for the first time that a solution which is based on the measurement of only two variables, the amplitude of the fundamental frequency of the switching waveform and input current, can achieve state-of-the-art induced voltage estimation accuracy. These two variables, which can be obtained using simple cost-effective analogue circuitry, are used in a Gaussian process to generate a regression model. This is used to estimate induced voltages at any angle in an approximate magnitude range of 0–20 V with a normalized root-mean-square error of 1% for the real part and 1.5% for the imaginary part. This corresponds to detecting a plastic container with 1 kg of saline so..
A 13.56 MHz bidirectional IPT system with wirelessly synchronised transceivers for ultra-low coupling operation
This paper presents a high-frequency inductive power transfer (HF-IPT) system with bidirectional capability employing a new wireless synchronisation method. Synchronisation is achieved by transmitting a reference ultra high frequency tone (433.92 MHz) that is stepped down to 13.56 MHz in each transceiver. This allows the operating frequency to be locked across the two sides of the system. Afterwards, a phase search is performed looking for maximum power throughput, determining the phase at the point of resonance (i.e., no reflected reactances). The experimental implementation is achieved with two back-to-back Class EF coil-drivers driven by independent synchronisation circuits. In the experimental setup a constant input voltage is set for each of the two coil-drivers by implementing a source-sink configuration, emulating a bidirectional DC-DC conversion stage at each side. Experimental results show successful transceiver synchronisation, and 4 W were transferred from one end to the other and conversely at an ultra-low coupling of 1.6%. This proves that the combination of the load-independent Class EF transceivers and the synchronisation technique introduced herein is suitable for applications that require large tolerance to misalignment and air gaps larger than one coil diameter, such as in micro e-mobility
Generalised multistage modelling and tuning algorithm for class EF and class Φ inverters to eliminate iterative retuning
The additional complexity of Class EF and Class Φ inverters compared to their Class E counterparts, combined with parasitic effects becoming more prevalent as frequency and power levels increase, results in poor accuracy from traditional design methods, and usually additional iterations of manual retuning are required. In this work we propose an approach to simulating and tuning Class EF/Φ inverters, with various levels of accuracy depending on the level of knowledge of the system parasitics. Our method is comprised of a combination of analytic and numerical solving methods thus providing both insight on the progression of the algorithm and computational robustness. The aim of our algorithm formulation is to enable solutions to be found in an automated and fast way. The novelty in our work lies in the design method's concurrent capability to provide a generalised set of design inputs (e.g. DC to AC current gain, arbitrary drain voltage slope at turn on, Φ- branch resonance, etc.), inclusion of board and device non-linear parasitics, and the ability to design within the set of preferred component values. An example is shown for the design of a 50 W, 13.56 MHz inverter where the experimental setup approaches the theoretical efficiency of 97%. The algorithm changes the values of the components over 5% to 50% and improves the simulated waveform accuracy by 2 to 12 times compared to the design method based on first order approximations
Efectos del cambio climático: Una mirada al Campo
El cambio climático afecta de manera sensible al sector agropecuario, lo cual genera conflictos sociales, pérdidas económicas y pone en riesgo la seguridad alimentaria de la población; tal como se ha podido evidenciar durante los periodos de lluvias intensas y sequÃa presentados durante los fenómenos del niño y de la niña en Colombia. La solución a esta problemática requiere de procesos de planeación a largo plazo, basados en la recuperación de los ecosistemas, el uso de nuevas tecnologÃas y en la consolidación de una nueva identidad cultural orientada en la sostenibilidad, tal como se expresa en los planes y polÃticas de cambio climático del paÃs. Esta revisión aborda los escenarios de cambio climático de Colombia y el departamento de Nariño, y evalúa los posibles impactos en el sector agropecuario; asà como las diferentes acciones de mitigación y adaptación implementadas a nivel regional. Finalmente, se abordan algunas experiencias exitosas en América Latina como el cultivo de variedades resistentes al estrés climático, los sistemas agroforestales, la cosecha de agua y la lluvia sólida
Report on Tests and Measurements of Hadronic Interaction Properties with Air Showers
We present a summary of recent tests and measurements of hadronic interaction
properties with air showers. This report has a special focus on muon density
measurements. Several experiments reported deviations between simulated and
recorded muon densities in extensive air showers, while others reported no
discrepancies. We combine data from eight leading air shower experiments to
cover shower energies from PeV to tens of EeV. Data are combined using the
z-scale, a unified reference scale based on simulated air showers.
Energy-scales of experiments are cross-calibrated. Above 10 PeV, we find a muon
deficit in simulated air showers for each of the six considered hadronic
interaction models. The deficit is increasing with shower energy. For the
models EPOS-LHC and QGSJet-II.04, the slope is found significant at 8 sigma.Comment: Submitted to the Proceedings of UHECR201
- …