225 research outputs found
The Pr.O.F. project: orienting late High School students to University methodology in Chemistry and other Sciences
The P.r.O.F. project has been presented at the ECTN meeting and positively evaluated. The project aims to help high school students in the transition to University. It covers the areas of Chemistry, Physics, Biology and Mathematics. In the Chemistry section, methodological issues were emphasized. The specific subject, selected jointly by University and School teachers, was Solutions and Solubility. Short and long-time tests were performed to check the effectiveness of the intervention
Monitoring of Plant Species and Communities on Coastal Cliffs: Is the Use of Unmanned Aerial Vehicles Suitable?
Cliffs are reservoirs of biodiversity; therefore, many plant species and communities of inland and coastal cliffs are protected by Council Directive 92/43/EEC (European Economic Community), and their monitoring is mandatory in European Union countries. Surveying plants on coastal cliff by traditional methods is challenging and alternatives are needed. We tested the use of a small Unmanned Aerial Vehicle (UAV) as an alternative survey tool, gathering aerial images of cliffs at Palinuro Cape (Southern Italy). Four photo-interpreters analysed independently the derived orthomosaic and plotted data needed for the monitoring activity. Data showed to be not affected by photo-interpreters and reliable for the prescribed monitoring in the European Union (EU). Using the GIS analysis tools, we were able to: (a) recognise and map the plant species, (b) derive and measure the area of distribution on the cliff of habitat and species, and (c) count Eokochia saxicola individuals and gather quantitative data on their projected area. Quality of the images represented the main constraint, but incoming technological improvements of sensors and UAVs may overcome this problem. Overall results support the use of UAVs as an affordable and fast survey technique that can rapidly increase the number of studies on cliff habitats and improve ecological knowledge on their plant species and communitie
Solids containing Si-O-P bonds: is the hydrolytic sol-gel route a suitable synthesis strategy?
Materials based on silicon-phosphorus mixed oxides have traditionally attracted interest in electronics, optics, catalysis, and related fields. The preparation of a solid containing stable SiâOâP linkages is a huge challenge due to their intrinsic instability to hydrolysis in a wet atmosphere. On the other hand, most technological applications of these materials, such as protonic conductive membranes in fuel cells and water-tolerant solid acid catalysts, are related to their interaction with water; consequently, suitable synthesis procedures that positively face this tradeoff are mandatory. Besides the traditional high-temperature techniques, sol-gel synthetic methods represent a viable, low-cost alternative, allowing for the preparation of high-purity materials with a homogeneous distribution of the components at the atomic scale. SiâOâP linkages are easily obtained by nonhydrolytic sol-gel routes, but only in inert and dry atmosphere. Conversely, hydrolytic routes offer opportunities to control the structure of the products in a wide range of processing conditions. The present review aims at providing an overall picture of the research on the sol-gel synthesis of phosphosilicate and related materials and theisr different applications, emphasizing how the interest in these systems is still lively, considering both conventional and emerging applications, such as flame retardance. The incorporation of SiâOâP nanostructures in polymer composites, coatings, and textiles is indeed a promising strategy to improve properties like thermal stability and fire resistance; however, their in-situ synthesis brings about additional difficulties related to the reactivity of the precursors. The perspectives linked with the development of SiâP-based materials are finally outlined
12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons"
Epoxy resins show a combination of thermal stability, good mechanical performance, and durability, which make these materials suitable for many applications in the Aerospace industry. Different types of curing agents can be utilized for curing epoxy systems. The use of aliphatic amines as curing agent is preferable over the toxic aromatic ones, though their incorporation increases the flammability of the resin. Recently, we have developed different hybrid strategies, where the sol-gel technique has been exploited in combination with two DOPO-based flame retardants and other synergists or the use of humic acid and ammonium polyphosphate to achieve non-dripping V-0 classification in UL 94 vertical flame spread tests, with low phosphorous loadings (e.g., 1-2 wt%). These strategies improved the flame retardancy of the epoxy matrix, without any detrimental impact on the mechanical and thermal properties of the composites. Finally, the formation of a hybrid silica-epoxy network accounted for the establishment of tailored interphases, due to a better dispersion of more polar additives in the hydrophobic resin
ALIPHATIC SILICAâEPOXY SYSTEMS CONTAINING DOPOâBASED FLAME RETARDANTS, BIOâWASTES, AND OTHER SYNERGISTS
Most industrial applications require polymerâbased materials showing excellent fire
performances to satisfy stringent requirements. Noâdripping and selfâextinguishing hybrid silicaâepoxy
composites can be prepared by combining tailored solâgel synthesis strategies with DOPOâbased flame
retardants, bioâwastes, and other synergists. This approach allows for achieving Vâ0 rating in ULâ94
vertical flame spread tests, even using a sustainable route, aliphatic amine as hardener, and low P
loadings
Development of Hybrid Titanium Oxide-based Systems for the Surface Stabilization of Reactive Oxygen Radicals
m-DOPA addition in MAPLE immobilization of lipase for biosensor applications
Matrix Assisted Pulsed Laser Evaporation (MAPLE) is a thin film deposition technique which uses a pulsed laser beam impinging, inside a high vacuum chamber, on a frozen target containing the guest molecules in a volatile matrix to induce fast "evaporation" of the matrix, and ejection of the guest molecules. Lipase, an enzyme acting as a catalyst in hydrolysis of lipids, is widely used in biosensors for detection of triglycerides in blood serum. A key action to this purpose is lipase immobilization on a substrate. In a recent paper, we have shown that MAPLE technique is able to deposit lipase on a substrate in an active form. Here we show that addition to the guest/matrix target of a small amount of m-DOPA (3-(3,4-dihydroxyphenyl)-2-methyl-l-alanine) in order to improve adhesion and protect lipase secondary structure, also allows the lowering the laser pulse energy required for matrix evaporation and therefore the risk of damaging the enzyme. Keywords: MAPLE, Lipase, m-DOPA, Biosensor
Hybrid Hemp Particles as Functional Fillers for the Manufacturing of Hydrophobic and Anti-icing Epoxy Composite Coatings
The development of hydrophobic composite coatings is of great interest for several applications in the aerospace industry. Functionalized microparticles can be obtained from waste fabrics and employed as fillers to prepare sustainable hydrophobic epoxy-based coatings. Following a waste-to-wealth approach, a novel hydrophobic epoxy-based composite including hemp microparticles (HMPs) functionalized with waterglass solution, 3-aminopropyl triethoxysilane, polypropylene-graft-maleic anhydride, and either hexadecyltrimethoxysilane or 1H,1H,2H,2H-perfluorooctyltriethoxysilane is presented. The resulting epoxy coatings based on hydrophobic HMPs were cast on aeronautical carbon fiber-reinforced panels to improve their anti-icing performance. Wettability and anti-icing behavior of the prepared composites were investigated at 25 °C and â30 °C (complete icing time), respectively. Samples cast with the composite coating can achieve up to 30 °C higher water contact angle and doubled icing time than aeronautical panels treated with unfilled epoxy resin. A low content (2 wt %) of tailored HMPs causes an increase of âŒ26% in the glass transition temperature of the coatings compared to pristine resin, confirming the good interaction between the hemp filler and epoxy matrix at the interphase. Finally, atomic force microscopy reveals that the HMPs can induce the formation of a hierarchical structure on the surface of casted panels. This rough morphology, combined with the silane activity, allows the preparation of aeronautical substrates with enhanced hydrophobicity, anti-icing capability, and thermal stability
An Environmentally Friendly NbâPâSi Solid Catalyst for Acid-Demanding Reactions
Here, we report the structural characteristics, the surface properties, and the catalytic performances of a NbâPâSi ternary oxide material (2.5Nb2O5·2.5P2O5·95SiO2, 2.5NbP) in two reactions of importance for biomass valorisation and green industrial production: hydrolysis of inulin and esterification of oleic acid with polyalcohol for biolubricant production. High dispersion of the Nb centers, ascertained by UVâvisâDRS, 29Si, 31P, and 1H solid-state NMR spectroscopy, is the key point for the successful activity of 2.5NbP. Intrinsic and effective acidities of the sample were studied by FT-IR of adsorbed pyridine in the absence and presence of water and by volumetric titrations of the acid sites in cyclohexane and in water, to enlighten the nature and amount of acid sites in different environments. For both studied reactions, 2.5NbP catalyst exhibits water-tolerant acidic sites, mainly BrĂžnsted ones, giving higher activity and better stability in the reaction medium than well-known niobium oxophosphate catalyst, which is considered one of the best water-tolerant acid catalysts
Indirect daylight oxidative degradation of polyethylene microplastics by a bio-waste modified TiO2-based material
Microplastics are recognized as an emerging critical issue for the environment. Here an innovative chemical approach for the treatment of microplastics is proposed, based on an oxidative process that does not require any direct energy source (irradiation or heat). Linear low-density polyethylene (LLDPE) was selected as target commodity polymer, due to its widespread use, chemical inertness and inefficient recycling. This route is based on a hybrid material coupling titanium oxide with a bio-waste, rosin, mainly constituted by abietic acid, through a simple sol-gel synthesis procedure. The ligand-to-metal charge transfer complexes formed between rosin and Ti4+ allow the generation of reactive oxygen species without UV irradiation for its activation. In agreement with theorical calculations, superoxide radical ions are stabilized at ambient conditions on the surface of the hybrid TiO2. Consequently, an impressive degradation of LLDPE is observed after 1 month exposure in a batch configuration under indirect daylight, as evidenced by the products revealed by gas chromatography-mass spectrometry analysis and by chemical and structural modifications of the polymer surface. In a context of waste exploitation, this innovative and sustainable approach represents a promising cost-effective strategy for the oxidative degradation of microplastics, without producing any toxic by-products
- âŠ