Dispositifs électroniques et mécaniques en graphène sous environnement optimal : du graphène suspendu aux hétérostructures graphène/nitrure de bore

Charge carriers in graphene form stable two-dimensional gases which are fully exposed to the environment. As a consequence, the electrical performance of graphene is strongly affected by surface charged impurities as well as topographic perturbations inherited from the underlying substrate.This thesis addresses several methods to circumvent that issue.The first method consists in embedding graphene in an optimized environment by depositing graphene onto some neutral and crystalline material. Novel 2D insulating materials such as hexagonal boron nitride buffer layer (BN) appears as ideal substrates to get rid of detrimental effect of interfacial charges and corrugation. Several fabrication schemes of Graphene/BN stacks are shown including some direct in-situ growth of graphene on BN crystal using an innovative proximity-driven chemical vapour growth based on BN exfoliation on copper. In order to explore the effects of the improved substrate on the transport properties of graphene, we have performed low temperature magneto-transport studies on these stacks. We present a direct comparison of weak localization signals with those acquired on a graphene/silica reference device. A clear increase of the coherence length is shown on Graphene/BN stacks together with improved electronic mobility and charge neutrality.Removing the substrate and suspending graphene is another approach for optimization of the graphene environment which forms the second topic covered in this thesis. After introducing an improved recipe for preserving the quality of graphene throughout an elaborate fabrication process, we probe the room- and low-temperature performance of the nano-electro-mechanical devices based on doubly clamped suspended graphene ribbons. The obtained data are used for characterizing the thermal expansion of CVD graphene.Le graphène possède un gaz bidimensionnel de porteurs de charge stable et exposé à l'environnement sans aucune protection. Par conséquent, ses performances électriques sont extrêmement sensibles aux conditions environnementales, notamment aux impuretés chargées et aux corrugations imposées par le substrat sous-jacent. Ces éléments ont une contribution majeure dans la dégradation des propriétés de transport électronique du matériau.L'objectif de cette thèse est d'explorer par diverses techniques des méthodes pour atténuer ces effets par optimisation de son environnement direct.La première méthode consiste à reporter le graphènesur une couche neutre d'un cristal de nitrure de bore hexagonal (BN). Diverses techniques de fabrication d'empilement de Graphène sur BN sont présentées, notamment la croissance directe de graphène sur un cristal de BN exfolié sur un substrat catalytique qui aboutit à la formation d'empilements de structure bien contrôlée. Les échantillons sont mesurés à très basse température. Les effets de localisation faible mesurés par magnéto-transport montrent une amélioration nette des performances notamment de la longueur de cohérence et de la mobilité électronique par rapport à un échantillon de référence constitué du même ruban de graphène déposé sur substrat conventionnel de silicium oxydé.La deuxième technique consiste à isoler le graphène de son support par surgravure de la silice et suspension du graphène sous la forme d'une membrane autosupportée et tenue par ses extrémités. Après avoir introduit des techniques de fabrication spécifiques, les mesures de transport et le couplage à des modes de vibration mécanique sont étudiés température variable. Ces données permettent notamment une mesure du coefficient d'expansion thermique du graphène

Dispositifs électroniques et mécaniques en graphène sous environnement optimal : du graphène suspendu aux hétérostructures graphène/nitrure de bore

Charge carriers in graphene form stable two-dimensional gases which are fully exposed to the environment. As a consequence, the electrical performance of graphene is strongly affected by surface charged impurities as well as topographic perturbations inherited from the underlying substrate.This thesis addresses several methods to circumvent that issue.The first method consists in embedding graphene in an optimized environment by depositing graphene onto some neutral and crystalline material. Novel 2D insulating materials such as hexagonal boron nitride buffer layer (BN) appears as ideal substrates to get rid of detrimental effect of interfacial charges and corrugation. Several fabrication schemes of Graphene/BN stacks are shown including some direct in-situ growth of graphene on BN crystal using an innovative proximity-driven chemical vapour growth based on BN exfoliation on copper. In order to explore the effects of the improved substrate on the transport properties of graphene, we have performed low temperature magneto-transport studies on these stacks. We present a direct comparison of weak localization signals with those acquired on a graphene/silica reference device. A clear increase of the coherence length is shown on Graphene/BN stacks together with improved electronic mobility and charge neutrality.Removing the substrate and suspending graphene is another approach for optimization of the graphene environment which forms the second topic covered in this thesis. After introducing an improved recipe for preserving the quality of graphene throughout an elaborate fabrication process, we probe the room- and low-temperature performance of the nano-electro-mechanical devices based on doubly clamped suspended graphene ribbons. The obtained data are used for characterizing the thermal expansion of CVD graphene.Le graphène possède un gaz bidimensionnel de porteurs de charge stable et exposé à l'environnement sans aucune protection. Par conséquent, ses performances électriques sont extrêmement sensibles aux conditions environnementales, notamment aux impuretés chargées et aux corrugations imposées par le substrat sous-jacent. Ces éléments ont une contribution majeure dans la dégradation des propriétés de transport électronique du matériau.L'objectif de cette thèse est d'explorer par diverses techniques des méthodes pour atténuer ces effets par optimisation de son environnement direct.La première méthode consiste à reporter le graphènesur une couche neutre d'un cristal de nitrure de bore hexagonal (BN). Diverses techniques de fabrication d'empilement de Graphène sur BN sont présentées, notamment la croissance directe de graphène sur un cristal de BN exfolié sur un substrat catalytique qui aboutit à la formation d'empilements de structure bien contrôlée. Les échantillons sont mesurés à très basse température. Les effets de localisation faible mesurés par magnéto-transport montrent une amélioration nette des performances notamment de la longueur de cohérence et de la mobilité électronique par rapport à un échantillon de référence constitué du même ruban de graphène déposé sur substrat conventionnel de silicium oxydé.La deuxième technique consiste à isoler le graphène de son support par surgravure de la silice et suspension du graphène sous la forme d'une membrane autosupportée et tenue par ses extrémités. Après avoir introduit des techniques de fabrication spécifiques, les mesures de transport et le couplage à des modes de vibration mécanique sont étudiés température variable. Ces données permettent notamment une mesure du coefficient d'expansion thermique du graphène

Drying of foam under microgravity conditions

Foams have recently been characterised as ideal products for pharmaceutical and topical use applications for the delivery of topical active agents. Foams are usually produced in a wet form but in a number of applications moderately dry foams are required. Drying of foam under terrestrial conditions proceeds under the action of gravity, which is impossible under microgravity condition. Below a new method of drying foams under microgravity condition is suggested. According to this method foam should be placed on a porous support, which will absorb the liquid from foam based on capillary forces only. The final liquid content inside the foam can be achieved by a proper selection of the porous support. The suggested method allows drying foams under microgravity conditions. Interaction of foams with porous support under terrestrial conditions was developed only recently and theoretically investigated (Arjmandi-Tash, O.; Kovalchuk, N.; Trybala, A.; Starov, V. Foam Drainage Placed on a Porous Substrate. Soft Matter2015, 11 (18), 3643–3652) followed by a theory of foam drainage on thin porous substrates (Koursari, N.; Arjmandi-Tash, O.; Johnson, P.; Trybala, A.; Starov, M. V. Foam Drainage Placed on Thin Porous Substrate. Soft Matter, 2019, (submitted)), where rate of drainage, radius of the wetted area inside the porous layer and other characteristics of the process were predicted. The latter model is modified below to investigate foam drying under microgravity conditions. Model predictions are compared with experimental observations for foam created using Triton X-100 at concentrations above CMC. Wetted radius inside the porous substrate was measured and results were compered to model predictions. Experimental observations for spreading area versus time show reasonable agreement with theoretical predictions for all investigated systems

Kinetics of Wetting and Spreading of Droplets over Various Substrates

There has been a substantial increase in the number of publications in the field of wetting and spreading since 2010. This increase in the rate of publications can be attributed to the broader application of wetting phenomena in new areas. It is impossible to review such a huge number of publications; that is, some topics in the field of wetting and spreading are selected to be discussed below. These topics are as follows: (i) Contact angle hysteresis on smooth homogeneous solid surfaces via disjoining/conjoining pressure. It is shown that the hysteresis contact angles can be calculated via disjoining/conjoining pressure. The theory indicates that the equilibrium contact angle is closer to a static receding contact angle than to a static advancing contact angle. (ii) The wetting of deformable substrates, which is caused by surface forces action in the vicinity of the apparent three-phase contact line, leading to a deformation on the substrate. (iii) The kinetics of wetting and spreading of non-Newtonian liquid (blood) over porous substrates. We showed that in spite of the enormous complexity of blood, the spreading over porous substrate can be described using a relatively simple model: a power low-shear-thinning non-Newtonian liquid. (iv) The kinetics of spreading of surfactant solutions. In this part, new results related to various surfactant solution mixtures (synergy and crystallization) are discussed, which shows some possible direction for the future revealing of superspreading phenomena. (v) The kinetics of spreading of surfactant solutions over hair. Fundamental problems to be solved are identified

Foams built up by non-Newtonian polymeric solutions: Free drainage

A mathematical model of free drainage of foam built up by a power-law non-Newtonian liquid is developed. The theory predictions are compared with the experimental data on the drainage of foams formed using commercially available Aculyn™22 and Aculyn™33 polymeric solutions. The rheological parameters of the polymeric solutions were independently measured and used in the calculations. The deduced dimensionless equations were solved using finite element method with appropriate boundary conditions. The numerical simulations show that the decrease in the foam height and liquid content is very fast in the very beginning of the drainage; however, it reaches a steady state at longer time. The predicted values of the time evolution of the foam height and liquid content are in good agreement with the measured experimental data

Spreading of blood drops over dry porous substrate: complete wetting case

Hypothesis The process of dried blood spot sampling involves simultaneous spreading and penetration of blood into a porous filter paper with subsequent evaporation and drying. Spreading of small drops of blood, which is a non-Newtonian liquid, over a dry porous layer is investigated from both theoretical and experimental points of view. Experiments and Theory A system of two differential equations is derived, which describes the time evolution of radii of both the drop base and the wetted region inside the porous medium. The system of equations does not include any fitting parameters. The predicted time evolutions of both radii are compared with experimental data published earlier. Findings For a given power law dependency of viscosity of blood with different haematocrit level, radii of both drop base and wetted region, and contact angle fell on three universal curves if appropriate scales are used with a plot of the dimensionless radii of the drop base and the wetted region inside the porous layer and dynamic contact angle on dimensionless time. The predicted theoretical relationships are three universal curves accounting satisfactorily for the experimental data

Simultaneous spreading and imbibition of blood droplets over porous substrates in the case of partial wetting

The sampling process of dried blood spot (DBS) is spreading of blood, which is Non-Newtonian fluid, over porous substrates. Spreading/imbibition behaviour of blood samples over Whatman 903 filter paper in complete wetting case has been investigated earlier (Tzu Chieh Chao et al., 2015). The spreading behaviour of DBS sampling has been investigated below in the case of partial wetting. Nitrocellulose membranes (NCM) with different pore size and silanized Whatman 903 blood saving card have been used as porous substrates. The spreading experiments have been applied to obtain the time evolution of spreading parameters, such as, radius of droplet base, dynamic contact angle and radius of the wetted region. The result of spreading on NCM showed that the spreading process was a partial wetting spreading. A separation of red blood cells (RBCs) and blood plasma has been found in the case of the blood drop spreading over 0.2 and 3.0 μm NCMs. Important that while the RBCs were not damaged in this process. This opens a completely new opportunity to (1) investigate RBCs and plasma separately; (2) to use this method for non-destructive separation of living cells from aqueous solution