170 research outputs found
Mid-infrared laser light nulling experiment using single-mode conductive waveguides
Aims: In the context of space interferometry missions devoted to the search
of exo-Earths, this paper investigates the capabilities of new single mode
conductive waveguides at providing modal filtering in an infrared and
monochromatic nulling experiment; Methods: A Michelson laser interferometer
with a co-axial beam combination scheme at 10.6 microns is used. After
introducing a Pi phase shift using a translating mirror, dynamic and static
measurements of the nulling ratio are performed in the two cases where modal
filtering is implemented and suppressed. No additional active control of the
wavefront errors is involved. Results: We achieve on average a statistical
nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null
of 5.6e-5 is obtained in static mode. At the moment, the impact of external
vibrations limits our ability to maintain the null to 10 to 20 seconds.;
Conclusions: A positive effect of SM conductive waveguide on modal filtering
has been observed in this study. Further improvement of the null should be
possible with proper mechanical isolation of the setup.Comment: Accepted in A&A, 7 pages, 5 figure
Modal Filtering for Nulling Interferometry-First Single-Mode Conductive Waveguides in the Mid-Infrared
This paper presents the work achieved for the manufacturing and
characterization of first single-mode waveguides to be used as modal filters
for nulling interferometry in the mid-infrared range [4-20 um]. As very high
dynamic range is mandatory for detection of Earth-like planets, modal filtering
is one of the most stringent instrumental aspects. The hollow metallic
waveguides (HMW) presented here are manufactured using micro-machining
techniques. Single-mode behavior has been investigated in laboratory through a
technique of polarization analysis while transmission features have been
measured using flux relative comparison. The single-mode behavior have been
assessed at lambda=10.6 um for rectangular waveguides with dimensions a=10 um
and b<5.3 um with an accuracy of ~2.5 %. The tests have shown that a
single-polarization state can be maintained in the waveguide. A comparison with
results on multi-mode HMW is proposed. Excess losses of 2.4 dB (~ 58 %
transmission) have been measured for a single-mode waveguide. In particular,
the importance of coupling conditions into the waveguide is emphasized here.
The goal of manufacturing and characterizing the first single-mode HMW for the
mid-infrared has been achieved. This opens the road to the use of integrated
optics for interferometry in the mentioned spectral range.Comment: 10 pages, 6 figures, accepted in A&
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
In this work, we present the first AMBER observations, of the Wolf-Rayet and
O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the
telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered
spectrally dispersed visibilities, as well as differential and closure phases,
with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret
these data in the context of a binary system with unresolved components,
neglecting in a first approximation the wind-wind collision zone flux
contribution. We show that the AMBER observables result primarily from the
contribution of the individual components of the WR+O binary system. We discuss
several interpretations of the residuals, and speculate on the detection of an
additional continuum component, originating from the free-free emission
associated with the wind-wind collision zone (WWCZ), and contributing at most
to the observed K-band flux at the 5% level. The expected absolute separation
and position angle at the time of observations were 5.1±0.9mas and
66±15° respectively. However, we infer a separation of
3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus
implies that the binary system lies at a distance of 368+38-13 pc, in agreement
with recent spectrophotometric estimates, but significantly larger than the
Hipparcos value of 258+41-31 pc
Near-Infrared interferometry of Eta Carinae with high spatial and spectral resolution using the VLTI and the AMBER instrument
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K
band observations were performed with the AMBER instrument of the ESO Very
Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines
from 42 to 89m. The aim of this work is to study the wavelength dependence of
Eta Car's optically thick wind region with a high spatial resolution of 5 mas
(11 AU) and high spectral resolution. The medium spectral resolution
observations (R=1,500) were performed in the wavelength range around both the
HeI 2.059 micron and the Br gamma 2.166 micron emission lines, the high
spectral resolution observations (R=12,000) only in the Br gamma line region.
In the K-band continuum, a diameter of 4.0 +/-0.2 mas (Gaussian FWHM, fit range
28-89m) was measured for Eta Car's optically thick wind region. If we fit
Hillier et al. (2001) model visibilities to the observed AMBER visibilities, we
obtain 50 % encircled-energy diameters of 4.2, 6.5 and 9.6mas in the 2.17
micron continuum, the HeI, and the Br gamma emission lines, respectively. In
the continuum near the Br gamma line, an elongation along a position angle of
120+/-15 degrees was found, consistent with previous VLTI/VINCI measurements by
van Boekel et al. (2003). We compare the measured visibilities with predictions
of the radiative transfer model of Hillier et al. (2001), finding good
agreement. Furthermore, we discuss the detectability of the hypothetical hot
binary companion. For the interpretation of the non-zero differential and
closure phases measured within the Br gamma line, we present a simple geometric
model of an inclined, latitude-dependent wind zone. Our observations support
theoretical models of anisotropic winds from fast-rotating, luminous hot stars
with enhanced high-velocity mass loss near the polar regions.Comment: 22 pages, 14 figures, 2 tables; A&A in pres
Noise and Robustness in Phyllotaxis
A striking feature of vascular plants is the regular arrangement of lateral organs on the stem, known as phyllotaxis. The most common phyllotactic patterns can be described using spirals, numbers from the Fibonacci sequence and the golden angle. This rich mathematical structure, along with the experimental reproduction of phyllotactic spirals in physical systems, has led to a view of phyllotaxis focusing on regularity. However all organisms are affected by natural stochastic variability, raising questions about the effect of this variability on phyllotaxis and the achievement of such regular patterns. Here we address these questions theoretically using a dynamical system of interacting sources of inhibitory field. Previous work has shown that phyllotaxis can emerge deterministically from the self-organization of such sources and that inhibition is primarily mediated by the depletion of the plant hormone auxin through polarized transport. We incorporated stochasticity in the model and found three main classes of defects in spiral phyllotaxis – the reversal of the handedness of spirals, the concomitant initiation of organs and the occurrence of distichous angles – and we investigated whether a secondary inhibitory field filters out defects. Our results are consistent with available experimental data and yield a prediction of the main source of stochasticity during organogenesis. Our model can be related to cellular parameters and thus provides a framework for the analysis of phyllotactic mutants at both cellular and tissular levels. We propose that secondary fields associated with organogenesis, such as other biochemical signals or mechanical forces, are important for the robustness of phyllotaxis. More generally, our work sheds light on how a target pattern can be achieved within a noisy background
Constraining the wind launching region in Herbig Ae stars: AMBER/VLTI spectroscopy of HD 104237
Astronomy and Astrophysics, 464, pp. 55-58, http://dx.doi.org./10.1051/0004-6361:20065719International audienc
Constraining the wind launching region in Herbig Ae stars: AMBER/VLTI spectroscopy of HD 104237
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.Aims. We investigate the origin of the BrÎł emission of the Herbig Ae star HD 104237 on Astronomical Unit (AU) scales.
Methods. Using AMBER/VLTI at a spectral resolution R = 1500 we spatially resolve the emission in both the BrÎł line and the adjacent continuum.
Results. The visibility does not vary between the continuum and the BrÎł line, even though the line is strongly detected in the spectrum, with a peak
intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band
continuum excess originates in a “puffed-up” inner rim of the circumstellar disk, and discuss the likely origin of Brγ.
Conclusions. We conclude that this emission most likely arises from a compact disk wind, launched from a region 0.2–0.5 AU from the star, with
a spatial extent similar to that of the near infrared continuum emission region, i.e., very close to the inner rim location.This work has been partly supported by the
MIUR COFIN grant 2003/027003-001 and 025227/2004 to the INAFOsservatorio
Astrofisico di Arcetri. This project has benefited from
funding from the French Centre National de la Recherche Scientifique
(CNRS) through the Institut National des Sciences de l’Univers
(INSU) and its Programmes Nationaux (ASHRA, PNPS). The authors
from the French laboratories would like to thank the successive
directors of the INSU/CNRS directors. C. Gil work was supported
in part by the Fundac¸˜ao para a Ciˆencia e a Tecnologia through
project POCTI/CTE-AST/55691/2004 from POCTI,with funds from
the European program FEDER
Interferometric data reduction with AMBER/VLTI. Principle, estimators, and illustration
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.Aims. In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the
AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but it can be derived for any single-mode interferometer.
Methods. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the
instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable,
which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square
determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the
spectral differential phase.
Results. The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented
in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the
VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited
performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.The AMBER project4 was founded by the French Centre
National de la Recherche Scientifique (CNRS), the Max Planck Institute fĂĽr
Radioastronomie (MPIfR) in Bonn, the Osservatorio Astrofisico di Arcetri
(OAA) in Firenze, the French Region “Provence Alpes Côte D’Azur” and
the European Southern Observatory (ESO). The CNRS funding has been
made through the Institut National des Sciences de l’Univers (INSU) and its
Programmes Nationaux (ASHRA, PNPS, PNP).
The OAA co-authors acknowledge partial support from MIUR grants to the
Arcetri Observatory: A LBT interferometric arm, and analysis of VLTI interferometric
data and From Stars to Planets: accretion, disk evolution and
planet formation and from INAF grants to the Arcetri Observatory Stellar and
Extragalactic Astrophysics with Optical Interferometry. C. Gil work was supported
in part by the Fundação para a Ciência e a Tecnologia through project
POCTI/CTE-AST/55691/2004 from POCTI, with funds from the European program
FEDER
- …