639 research outputs found
Commissioning of the electron injector for the AWAKE experiment
The advanced wakefield experiment (AWAKE) at CERN is the first proton beam-driven plasma wakefield acceleration experiment. The main goal of AWAKE RUN 1 was to demonstrate seeded self-modulation (SSM) of the proton beam and electron witness beam acceleration in the plasma wakefield. For the AWAKE experiment, a 10-meter-long Rubidium-vapor cell together with a high-power laser for ionization was used to generate the plasma. The plasma wakefield is driven by a 400 GeV/c proton beam extracted from the super proton synchrotron (SPS), which undergoes a seeded self-modulation process in the plasma. The electron witness beam used to probe the wakefields is generated from an S-band RF photo-cathode gun and then accelerated by a booster structure up to energies between 16 and 20 MeV. The first run of the AWAKE experiment revealed that the maximum energy gain after the plasma cell is 2 GeV, and the SSM mechanism of the proton beam was verified. In this paper, we will present the details of the AWAKE electron injector. A comparison of the measured electron beam parameters, such as beam size, energy, and normalized emittance, with the simulation results was performed
Serial Powering of Silicon Sensors
Serial powering is a technique to provide power to a number of serially chained detector modules. It is an alternative option to independent powering that is particularly attractive when the number of modules is high, as in largescale silicon tracking detectors for particle physics. It uses a single power cable and a constant current source. On each module power is derived using local shunt regulators. Design aspects of local shunt regulators and system aspects of serial powering will be discussed. Test results and measurements obtained with a silicon strip supermodule will be presented. Specifications of radiation-hard custom serial powering circuitry will be discussed
Design and operation of a prototype interaction point beam collision feedback system for the International Linear Collider
A high-resolution, intratrain position feedback system has been developed to
achieve and maintain collisions at the proposed future electron-positron
International Linear Collider (ILC). A prototype has been commissioned and
tested with a beam in the extraction line of the Accelerator Test Facility at
the High Energy Accelerator Research Organization in Japan. It consists of a
stripline beam position monitor (BPM) with analogue signal-processing
electronics, a custom digital board to perform the feedback calculation, and a
stripline kicker driven by a high-current amplifier. The closed-loop feedback
latency is 148 ns. For a three-bunch train with 154 ns bunch spacing, the
feedback system has been used to stabilize the third bunch to 450 nm. The
kicker response is linear, and the feedback performance is maintained, over a
correction range of over 60 {\mu}m. The propagation of the correction has
been confirmed by using an independent stripline BPM located downstream of the
feedback system. The system has been demonstrated to meet the BPM resolution,
beam kick, and latency requirements for the ILC
Real world CO2 and NOx emissions from 149 Euro 5 and 6 diesel, gasoline and hybrid passenger cars.
In this study CO2 and NOx emissions from 149 Euro 5 and 6 diesel, gasoline and hybrid passenger cars were compared using a Portable Emissions Measurement System (PEMS). The models sampled accounted for 56% of all passenger cars sold in Europe in 2016. We found gasoline vehicles had CO2 emissions 13-66% higher than diesel. During urban driving, the average CO2 emission factor was 210.5 (sd. 47) gkm-1 for gasoline and 170.2 (sd. 34) gkm-1 for diesel. Half the gasoline vehicles tested were Gasoline Direct Injection (GDI). Euro 6 GDI engines <1.4â delivered ~17% CO2 reduction compared to Port Fuel Injection (PFI). Gasoline vehicles delivered an 86-96% reduction in NOx emissions compared to diesel cars. The average urban NOx emission from Euro 6 diesel vehicles 0.44 (sd. 0.44) gkm-1 was 11 times higher than for gasoline 0.04 (sd. 0.04) gkm-1. We also analysed two gasoline-electric hybrids which out-performed both gasoline and diesel for NOx and CO2. We conclude action is required to mitigate the public health risk created by excessive NOx emissions from modern diesel vehicles. Replacing diesel with gasoline would incur a substantial CO2 penalty, however greater uptake of hybrid vehicles would likely reduce both CO2 and NOx emissions. Discrimination of vehicles on the basis of Euro standard is arbitrary and incentives should promote vehicles with the lowest real-world emissions of both NOx and CO2
Phenomenological description of the gamma* p cross section at low Q2
Low Q2 photon-proton cross sections are analysed using a simple,
QCD-motivated parametrisation ,
which gives a good description of the data. The Q2 dependence of the gamma* p
cross section is discussed in terms of the partonic transverse momenta of the
hadronic state the photon fluctuates into.Comment: 14 pages, revtex, epsfig, 2 figure
Systems thinking for the transition to zero pollution
Systems approaches are vital for coordinating decision-making in the face of complex issues because they provide the whole picture view needed to avoid negative unintended consequences and to generate genuine benefits. This paper explains how systems thinking can be used to address environmental pollution and support decision-makers in finding solutions
The AWAKE Run 2 Programme and beyond
Plasma wakefield acceleration is a promising technology to reduce the size of particle accelerators. The use of high energy protons to drive wakefields in plasma has been demonstrated during Run 1 of the AWAKE programme at CERN. Protons of energy 400 GeV drove wakefields that accelerated electrons to 2 GeV in under 10 m of plasma. The AWAKE collaboration is now embarking on Run 2 with the main aims to demonstrate stable accelerating gradients of 0.5â1 GV/m, preserve emittance of the electron bunches during acceleration and develop plasma sources scalable to 100s of metres and beyond. By the end of Run 2, the AWAKE scheme should be able to provide electron beams for particle physics experiments and several possible experiments have already been evaluated. This article summarises the programme of AWAKE Run 2 and how it will be achieved as well as the possible application of the AWAKE scheme to novel particle physics experiments.info:eu-repo/semantics/publishedVersio
EFFECT OF CSR SHIELDING IN THE COMPACT LINEAR COLLIDER
Abstract The Drive Beam complex of the Compact Linear Collider must use short bunches with a large charge making beam transport susceptible to unwanted effects of Coherent Synchrotron Radiation emitted in the dipole magnets. We present the effects of transporting the beam within a limited aperture which decreases the magnitude of the CSR wake. The effect, known as CSR shielding, eases the design of key components of the facility
DEVELOPMENT OF A FAST MICRON-RESOLUTION BEAM POSITION MONITOR SIGNAL PROCESSOR FOR LINEAR COLLIDER BEAMBASED FEEDBACK SYSTEMS
We present the design of a prototype fast beam position monitor (BPM) signal processor for use in inter-bunch beam-based feedbacks for linear colliders and electron linacs. We describe the FONT4 intra-train beam-based digital position feedback system prototype deployed at the Accelerator test facility (ATF) extraction line at KEK, Japan. The system incorporates a fast analogue beam position monitor front-end signal processor, a digital feedback board, and a fast kicker-driver amplifier. The total feedback system latency is less than 150ns, of which less than 10ns is used for the BPM processor. We report preliminary results of beam tests using electron bunches separated by c. 150ns. Position resolution of order 1 micron was obtained
BEAM TEST RESULTS WITH THE FONT4 ILC PROTOTYPE INTRA-TRAIN BEAM FEEDBACK SYSTEM
We present the design and beam test results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured to have a latency of approximately 140 ns
- âŠ