1,217 research outputs found

    Effect of insulin glargine on cardiovascular risk analysed by mean HRV

    Get PDF
    Type 2 diabetes mellitus is an insidious disease that is increasingly present in geriatric population [1]. The greatest difficulty is represented by glycaemic control in geriatric patients often not very compliant with diet therapy and drug therapy. A new insulin glargine 300 units/ml formulation seems im- prove patient compliance due to the lower volume of insulin to be injected and improved glycaemic control over 24 hours. The HRV signal, derived from digital electrocardiographic recording, is the simplest and most imme- diate analysis that consists in calculating some temporal parameters [2]. HRV is a simple statistics derived from beat-beat intervals of sinus origin expressed as units of time in milliseconds. Data in the literature indicate that a decrease in HRV, measured with time domain analysis, denotes a worse prognosis and/or an increased risk of mortality in patients with heart disease, especially in the elderly ones

    High-wearable EEG-based distraction detection in motor rehabilitation

    Get PDF
    A method for EEG-based distraction detection during motor-rehabilitation tasks is proposed. A wireless cap guarantees very high wearability with dry electrodes and a low number of channels. Experimental validation is performed on a dataset from 17 volunteers. Different feature extractions from spatial, temporal, and frequency domain and classification strategies were evaluated. The performances of five supervised classifiers in discriminating between attention on pure movement and with distractors were compared. A k-Nearest Neighbors classifier achieved an accuracy of 92.8 ± 1.6%. In this last case, the feature extraction is based on a custom 12 pass-band Filter-Bank (FB) and the Common Spatial Pattern (CSP) algorithm. In particular, the mean Recall of classification (percentage of true positive in distraction detection) is higher than 92% and allows the therapist or an automated system to know when to stimulate the patient’s attention for enhancing the therapy effectiveness

    Ordered interfaces for dual easy axes in liquid crystals

    Get PDF
    International audienceUsing nCB films adsorbed on MoS 2 substrates studied by x-ray diffraction, optical microscopy and Scanning Tunneling Microscopy, we demonstrate that ordered interfaces with well-defined orientations of adsorbed dipoles induce planar anchoring locked along the adsorbed dipoles or the alkyl chains, which play the role of easy axes. For two alternating orientations of the adsorbed dipoles or dipoles and alkyl chains, bi-stability of anchoring can be obtained. The results are explained using the introduction of fourth order terms in the phenomenological anchoring potential, leading to the demonstration of first order anchoring transition in these systems. Using this phenomenological anchoring potential, we finally show how the nature of anchoring in presence of dual easy axes (inducing bi-stability or average orientation between the two easy axes) can be related to the microscopical nature of the interface. Introduction Understanding the interactions between liquid crystal (LC) and a solid substrate is of clear applied interest, the vast majority of LC displays relying on control of interfaces. However this concerns also fundamental problems like wetting phenomena and all phenomena of orientation of soft matter bulk induced by the presence of an interface. In LCs at interfaces, the so-called easy axes correspond to the favoured orientations of the LC director close to the interface. If one easy axis only is defined for one given interface, the bulk director orients along or close to this axis [1]. It is well known that, in anchoring phenomena, two major effects compete to impose the anchoring directions of a liquid crystal, first, the interactions between molecules and the interface, second, the substrate roughness whose role has been analyzed by Berreman [2]. The influence of adsorbed molecular functional groups at the interface is most often dominant with, for example in carbon substrates, a main influence of unsaturated carbon bonds orientation at the interface [3]. In common LC displays, there is one unique easy axis, but modifications of surfaces have allowed for the discovery of promising new anchoring-related properties. For instance, the first anchoring bi-stability has been established on rough surfaces, associated with electric ordo-polarization [4] and the competition between a stabilizing short-range term and a destabilizing long-range term induced by an external field, can induce a continuous variation of anchoring orientation [5]. More recently, surfaces with several easy axes have been studied extensively. It has been shown that control of a continuous variation of director pretilt, obtained in several systems [6, 7], is associated with the presence of two different easy axes, one perpendicular to the substrate (homeotropic) and one planar [7, 8]. Similar models can explain the continuous evolution of anchoring between two planar orientations observed on some crystalline substrates [9]. However, in the same time, two easy axes can also lead to anchoring bi-stability [10, 11] or discontinuous transitions of anchoring [9], which is not compatible with the model established to interpret observed control of pretilt. In order to be able to predict if bi-stability or continuous combination of the two easy axes occurs for one given system, it becomes necessary to understand the microscopic origin of the easy axes

    Enamel Erosion Reduction through Coupled Sodium Fluoride and Laser Treatments before Exposition in an Acid Environment: An In Vitro Randomized Control SEM Morphometric Analysis

    Get PDF
    (1) Background: Erosive lesions of dental enamel are steadily increasing owing to both the availability of exogenous acid and the production of endogenous acid. The aim of this study was to investigate the erosion-inhibiting potential of a diode laser irradiation and topical application of fluoride used alone or in combination on the enamel surface of extracted teeth before exposure to an acidic solution. (2) Methods: The four axial enamel surfaces of 40 healthy molars were used for four study groups: (A) no treatment; (B) application of fluoride gel for 120 s; (O) a diode laser application for 120 s; and (X) a combined laser/fluoride for 120 s. Each enamel surface was examined by SEM (scanning electron microscopy). (3) Results: At 700× magnification, it was possible to detect the enamel prisms of the test area of groups A, B, and O, while no structures such as enamel prisms were highlighted for group X because they were covered by an amorphous layer. The mean number of prisms ×1000 µm2 was 7.2 units with an SD of 0.72 for group A, 8 units with an SD of 0.96 for group B, and 4.8 units with a SD of 0.4 for group O. Student’s t-test showed no significant difference between group A and B with a p = 0.054. Group O showed a significant reduction of prims ×1000 µm2 compared with group A (p = 0.0027) and group B (p = 0.0009). Student’s t-test showed no significant difference between groups A and B with a p = 0.054. Group O showed a significant reduction of prims density with respect to group A (p = 0.0027) and group B (p = 0.0009). (4) Conclusions: This amorphous layer might be correlated with the effect of laser on enamel, which reduces both water and carbonate ion; increases the crystallinity of hydroxyapatite, and improves the mechanical properties of enamel; which is responsible for greater protection expressed by the enamel of group X against acid attacks

    Characterization and sequence analysis of the lsg (LOS synthesis genes) locus from Haemophilus influenzae type b

    Full text link
    Analysis of the lsg (LOS synthesis genes) cluster in Escherichia coli strain K12 and mutations in the lsg locus in Haemophilus influenzae type b indicated the presence of 3 regions responsible for sequential modifications of E. coli lipopolysaccharide (LPS). Sequencing of the lsg region yielded 7,435 bp that encompassed 7 complete and 1 partial open reading frames (ORFs 1-8). The predicted product of ORF1 had homology to the consensus sequence of cytochrome b proteins (21% identity, 51% similarity) and to other transmembrane proteins. The products of ORF5 and ORF6 share overall 23% identity and 49% similarity with each other. The ORF6 protein had high homology with the product of ORF275 of the E. coli rfb gene cluster (40% identity, 58% similarity), whose function is not known. Multiple sequence alignment of the ORF5 and ORF6 proteins with the RfbB, RfbJ and RfbX proteins revealed conserved motifs over the N-terminal half region of all these proteins. The products of ORF7 and ORF8 are homologous with Azotobacter vinelandii MolA protein (30% identity, 51% similarity) and MolB protein (26% identity, 48% similarity), respectively. The promoter regions of ORF1, 7 and 8 were determined by primer extension analysis and found to be similar to bacterial σ70-dependent promoters. ORF7 and ORF8 are transcribed into diverse orientation. At least 5 of the encoded proteins have been identified using coupled E. coli transcription/translation system and labeling with [35S]-methionine. We conclude that the genetic organization of the lsg biosynthesis pathway involves multiple operons that lead to the assembly of an H. influenzae LOS structure.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67077/2/10.1177_096805199400100305.pd

    Rapid identification of BCR/ABL1-like acute lymphoblastic leukaemia patients using a predictive statistical model based on quantitative real time-polymerase chain reaction: clinical, prognostic and therapeutic implications.

    Get PDF
    BCR/ABL1-like acute lymphoblastic leukaemia (ALL) is a subgroup of B-lineage acute lymphoblastic leukaemia that occurs within cases without recurrent molecular rearrangements. Gene expression profiling (GEP) can identify these cases but it is expensive and not widely available. Using GEP, we identified 10 genes specifically overexpressed by BCR/ABL1-like ALL cases and used their expression values - assessed by quantitative real time-polymerase chain reaction (Q-RT-PCR) in 26 BCR/ABL1-like and 26 non-BCR/ABL1-like cases to build a statistical "BCR/ABL1-like predictor", for the identification of BCR/ABL1-like cases. By screening 142 B-lineage ALL patients with the "BCR/ABL1-like predictor", we identified 28/142 BCR/ABL1-like patients (19·7%). Overall, BCR/ABL1-like cases were enriched in JAK/STAT mutations (P < 0·001), IKZF1 deletions (P < 0·001) and rearrangements involving cytokine receptors and tyrosine kinases (P = 0·001), thus corroborating the validity of the prediction. Clinically, the BCR/ABL1-like cases identified by the BCR/ABL1-like predictor achieved a lower rate of complete remission (P = 0·014) and a worse event-free survival (P = 0·0009) compared to non-BCR/ABL1-like ALL. Consistently, primary cells from BCR/ABL1-like cases responded in vitro to ponatinib. We propose a simple tool based on Q-RT-PCR and a statistical model that is capable of easily, quickly and reliably identifying BCR/ABL1-like ALL cases at diagnosis

    Biomechanically inspired shape memory effect machines driven by muscle like acting NiTi alloys

    Get PDF
    The research shows a bioinspired approach to be adopted to design of systems based on Shape Memory Alloys (SMAs), a class of Smart Materials that has in common with muscles the capability to react to an impulse (thermal for SMAs) with a contraction. The biomechanically inspired machine that is discussed in the paper refers to the antagonistic muscles pairs, which belongs to the Skeletal Muscles and are normally arranged in opposition so that as one group of muscles contract another group relaxes or lengthens. The study proposes a model, a solution not only to design a specific application, but also to provide an approach to be used for a wide range of adaptive applications (switchable windows, smart shadow systems, parking and urban shelters, etc.), where the shape changes in response to different external stimuli. The use of antagonist pairs mechanism provides a solution for better optimized systems based on SMAs where the main and proven advantages are: Easier and faster change of shape, lower need of energy for system operation, lower cost for SMA training and no problem of overheating

    Comparative analyses of proteins from Haemophilus influenzae biofilm and planktonic populations using metabolic labeling and mass spectrometry

    Get PDF
    BACKGROUND: Non-typeable H. influenzae (NTHi) is a nasopharyngeal commensal that can become an opportunistic pathogen causing infections such as otitis media, pneumonia, and bronchitis. NTHi is known to form biofilms. Resistance of bacterial biofilms to clearance by host defense mechanisms and antibiotic treatments is well-established. In the current study, we used stable isotope labeling by amino acids in cell culture (SILAC) to compare the proteomic profiles of NTHi biofilm and planktonic organisms. Duplicate continuous-flow growth chambers containing defined media with either “light” (L) isoleucine or “heavy” (H) (13)C(6)-labeled isoleucine were used to grow planktonic (L) and biofilm (H) samples, respectively. Bacteria were removed from the chambers, mixed based on weight, and protein extracts were generated. Liquid chromatography-mass spectrometry (LC-MS) was performed on the tryptic peptides and 814 unique proteins were identified with 99% confidence. RESULTS: Comparisons of the NTHi biofilm to planktonic samples demonstrated that 127 proteins showed differential expression with p-values ≤0.05. Pathway analysis demonstrated that proteins involved in energy metabolism, protein synthesis, and purine, pyrimidine, nucleoside, and nucleotide processes showed a general trend of downregulation in the biofilm compared to planktonic organisms. Conversely, proteins involved in transcription, DNA metabolism, and fatty acid and phospholipid metabolism showed a general trend of upregulation under biofilm conditions. Selected reaction monitoring (SRM)-MS was used to validate a subset of these proteins; among these were aerobic respiration control protein ArcA, NAD nucleotidase and heme-binding protein A. CONCLUSIONS: The present proteomic study indicates that the NTHi biofilm exists in a semi-dormant state with decreased energy metabolism and protein synthesis yet is still capable of managing oxidative stress and in acquiring necessary cofactors important for biofilm survival. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12866-014-0329-9) contains supplementary material, which is available to authorized users

    Characterization of Chimeric Lipopolysaccharides from Escherichia coli Strain JM109 Transformed with Lipooligosaccharide Synthesis Genes (lsg) from Haemophilus influenzae

    Get PDF
    Previously, we reported the expression of chimeric lipopolysaccharides (LPS) in Escherichia coli strain JM109 (a K-12 strain) transformed with plasmids containing Haemophilus influenzae lipooligosaccharide synthesis genes (lsg) (Abu Kwaik, Y., McLaughlin, R. E., Apicella, M. A., and Spinola, S. M. (1991) Mol. Microbiol. 5, 2475–2480). In this current study, we have analyzed the O-deacylated LPS and free oligosaccharides from three transformants (designated pGEMLOS-4, pGEMLOS- 5, and pGEMLOS-7) by matrix-assisted laser desorption ionization, electrospray ionization, and tandem mass spectrometry techniques, along with composition and linkage analyses. These data show that the chimeric LPS consist of the complete E. coli LPS core structure glycosylated on the 7-position of the non-reducing terminal branch heptose with oligosaccharides from H. influenzae. In pGEMLOS-7, the disaccharide Gal13 3GlcNAc13 is added, and in pGEMLOS-5, the structure is extended to Gal134GlcNAc133Gal133GlcNAc13. PGEMLOS-5 LPS reacts positively with monoclonal antibody 3F11, an antibody that recognizes the terminal disaccharide of lacto-N-neotetraose. In pGEMLOS-4 LPS, the 3F11 epitope is apparently blocked by glycosylation on the 6-position of the terminal Gal with either Gal or GlcNAc. The biosynthesis of these chimeric LPS was found to be dependent on a functional wecA (formerly rfe) gene in E. coli. By using this carbohydrate expression system, we have been able to examine the functions of the lsg genes independent of the effects of other endogenous Haemophilus genes and expressed proteins
    corecore