Quantum nondemolition detection of a propagating microwave photon

The ability to nondestructively detect the presence of a single, traveling photon has been a long-standing goal in optics, with applications in quantum information and measurement. Realising such a detector is complicated by the fact that photon-photon interactions are typically very weak. At microwave frequencies, very strong effective photon-photon interactions in a waveguide have recently been demonstrated. Here we show how this type of interaction can be used to realize a quantum nondemolition measurement of a single propagating microwave photon. The scheme we propose uses a chain of solid-state 3-level systems (transmons), cascaded through circulators which suppress photon backscattering. Our theoretical analysis shows that microwave-photon detection with fidelity around 90% can be realized with existing technologies

Embedded Sensors for Measuring Surface Regression

The development and evaluation of new hybrid and solid rocket motors requires accurate characterization of the propellant surface regression as a function of key operational parameters. These characteristics establish the propellant flow rate and are prime design drivers affecting the propulsion system geometry, size, and overall performance. There is a similar need for the development of advanced ablative materials, and the use of conventional ablatives exposed to new operational environments. The Miniature Surface Regression Sensor (MSRS) was developed to serve these applications. It is designed to be cast or embedded in the material of interest and regresses along with it. During this process, the resistance of the sensor is related to its instantaneous length, allowing the real-time thickness of the host material to be established. The time derivative of this data reveals the instantaneous surface regression rate. The MSRS could also be adapted to perform similar measurements for a variety of other host materials when it is desired to monitor thicknesses and/or regression rate for purposes of safety, operational control, or research. For example, the sensor could be used to monitor the thicknesses of brake linings or racecar tires and indicate when they need to be replaced. At the time of this reporting, over 200 of these sensors have been installed into a variety of host materials. An MSRS can be made in either of two configurations, denoted ladder and continuous (see Figure 1). A ladder MSRS includes two highly electrically conductive legs, across which narrow strips of electrically resistive material are placed at small increments of length. These strips resemble the rungs of a ladder and are electrically equivalent to many tiny resistors connected in parallel. A substrate material provides structural support for the legs and rungs. The instantaneous sensor resistance is read by an external signal conditioner via wires attached to the conductive legs on the non-eroding end of the sensor. The sensor signal can be transmitted from inside a high-pressure chamber to the ambient environment, using commercially available feedthrough connectors. Miniaturized internal recorders or wireless data transmission could also potentially be employed to eliminate the need for producing penetrations in the chamber case. The rungs are designed so that as each successive rung is eroded away, the resistance changes by an amount that yields a readily measurable signal larger than the background noise. (In addition, signal-conditioning techniques are used in processing the resistance readings to mitigate the effect of noise.) Hence, each discrete change of resistance serves to indicate the arrival of the regressing host material front at the known depth of the affected resistor rung. The average rate of regression between two adjacent resistors can be calculated simply as the distance between the resistors divided by the time interval between their resistance jumps. Advanced data reduction techniques have also been developed to establish the instantaneous surface position and regression rate when the regressing front is between rungs

A Fast and Compact Quantum Random Number Generator

We present the realization of a physical quantum random number generator based on the process of splitting a beam of photons on a beam splitter, a quantum mechanical source of true randomness. By utilizing either a beam splitter or a polarizing beam splitter, single photon detectors and high speed electronics the presented devices are capable of generating a binary random signal with an autocorrelation time of 11.8 ns and a continuous stream of random numbers at a rate of 1 Mbit/s. The randomness of the generated signals and numbers is shown by running a series of tests upon data samples. The devices described in this paper are built into compact housings and are simple to operate.Comment: 23 pages, 6 Figs. To appear in Rev. Sci. Inst

Current distribution and status of amphibians and reptiles in Will County, Illinois

The distribution of amphibians and reptiles in Will County, Illinois, was assessed using museum records and results from 58 surveys conducted between 1986 and 2009 on lands owned and managed by the Forest Preserve District of Will County (FPDWC) and Illinois Department of Natural Resources (IDNR). One hundred and twenty sources of information were examined including technical reports, theses, dissertations, and personal data belonging to the authors. Forty-eight species (19 amphibians, 29 reptiles) were documented by photos or specimens from Will County. Eleven species were determined widespread and common, 6 were categorized as patchy distributions and are uncommon or locally common, and 23 were found to have restricted distributions and are considered rare, including seven state-listed species. One of those state-listed species (Sistrurus catenatus) is likely extirpated. Eight species had undetermined distributions, four of them of questionable occurrence. One of the questionable species (Anaxyrus fowleri) is no longer included in the current list of Will County herpetofauna because it has been determined to have been an introduction and no known population exists. For three others Terrapene carolina, Pantherophis spiloides, Nerodia rhombifer) we were unable to conclusively interpret their records and they are assigned questionable status until further records confirm existence of viable, self sustaining populations. Of seven state-listed species (four threatened, three endangered), one may be extirpated (Sistrurus catenatus). Lithobates sylvaticus, Hemidactylium scutatum, Ambystoma texanum, and Eurycea cirrigera are glacial relicts that are highly vulnerable to extirpation due to pollution, isolation, and a warming climate. Presently, 43 species (18 amphibians, 25 reptiles) are known to occur in Will County, making it the most species-rich county in the Chicago region.Ope

3 mm GMVA Observations of Total and Polarized Emission from Blazar and Radio Galaxy Core Regions

We present total and linearly polarized 3 mm Global mm-VLBI Array images of a sample of blazars and radio galaxies from the VLBA-BU-BLAZAR 7 mm monitoring program designed to probe the innermost regions of active galactic nuclei (AGN) jets and locate the sites of gamma-ray emission observed by the Fermi-LAT. The lower opacity at 3 mm and improved angular resolution, on the order of 50 microarcseconds, allow us to distinguish features in the jet not visible in the 7 mm VLBA data. We also compare two different methods used for the calibration of instrumental polarisation and we analyze the resulting images for some of the sources in the sample.Comment: Polarised Emission from Astrophysical Jets, June 12-16, 2017, Ierapetra, Greec

A Novel Gene Family Controls Species-Specific Morphological Traits in Hydra

Understanding the molecular events that underlie the evolution of morphological diversity is a major challenge in biology. Here, to identify genes whose expression correlates with species-specific morphologies, we compared transcriptomes of two closely related Hydra species. We find that species-specific differences in tentacle formation correlate with expression of a taxonomically restricted gene encoding a small secreted protein. We show that gain of function induces changes in morphology that mirror the phenotypic differences observed between species. These results suggest that “novel” genes may be involved in the generation of species-specific morphological traits

Conceptually driven and visually rich tasks in texts and teaching practice: the case of infinite series

The study we report here examines parts of what Chevallard calls the institutional dimension of the students’ learning experience of a relatively under-researched, yet crucial, concept in Analysis, the concept of infinite series. In particular, we examine how the concept is introduced to students in texts and in teaching practice. To this purpose, we employ Duval's Theory of Registers of Semiotic Representation towards the analysis of 22 texts used in Canada and UK post-compulsory courses. We also draw on interviews with in-service teachers and university lecturers in order to discuss briefly teaching practice and some of their teaching suggestions. Our analysis of the texts highlights that the presentation of the concept is largely a-historical, with few graphical representations, few opportunities to work across different registers (algebraic, graphical, verbal), few applications or intra-mathematical references to the concept's significance and few conceptually driven tasks that go beyond practising with the application of convergence tests and prepare students for the complex topics in which the concept of series is implicated. Our preliminary analysis of the teacher interviews suggests that pedagogical practice often reflects the tendencies in the texts. Furthermore, the interviews with the university lecturers point at the pedagogical potential of: illustrative examples and evocative visual representations in teaching; and, student engagement with systematic guesswork and writing explanatory accounts of their choices and applications of convergence tests

Real-time live-cell imaging technology enables high-throughput screening to verify in vitro biocompatibility of 3D printed materials

With growing advances in three-dimensional (3D) printing technology, the availability and diversity of printing materials has rapidly increased over the last years. 3D printing has quickly become a useful tool for biomedical and various laboratory applications, offering a tremendous potential for efficiently fabricating complex devices in a short period of time. However, there still remains a lack of information regarding the impact of printing materials and post-processing techniques on cell behavior. This study introduces real-time live-cell imaging technology as a fast, user-friendly, and high-throughput screening strategy to verify the in vitro biocompatibility of 3D printed materials. Polyacrylate-based photopolymer material was printed using high-resolution 3D printing techniques, post-processed using three different procedures, and then analyzed with respect to its effects on cell viability, apoptosis, and necrosis of adipogenic mesenchymal stem cells (MSCs). When using ethanol for the post-processing procedure and disinfection, no significant effects on MSCs could be detected. For the analyses a novel image-based live-cell analysis system was compared against a biochemical-based standard plate reader assay and traditional flow cytometry. This comparison illustrates the superiority of using image-based detection of in vitro biocompatibility with respect to analysis time, usability, and scientific outcome

On the local structure of Lorentzian Einstein manifolds with parallel distribution of null lines

We study transformations of coordinates on a Lorentzian Einstein manifold with a parallel distribution of null lines and show that the general Walker coordinates can be simplified. In these coordinates, the full Lorentzian Einstein equation is reduced to equations on a family of Einstein Riemannian metrics.Comment: Dedicated to Dmitri Vladimirovich Alekseevsky on his 70th birthda