The Presence of Lampreys in the Tyrrhenian Rivers of the Campania Region (Southern Italy): A New Record of the Sea Lamprey Petromyzon marinus (Linnaeus 1758).

The southern Italian peninsula has been suggested to be an important European district for lampreys’ genetic diversity. All lamprey species ever described throughout the Italian peninsula are protected within European legislation and listed in Annex II of the EU Habitats Directive (92/43/EEC)and Annex III of the Bern Convention (82/72/CEE) as species of conservation concern, and the Habitats Directive ensures the designation of “sites of community interest” (SICs) for threatened species. During a survey to collect preliminary data on lampreys’ presence in the Cilento, Vallo di Daino, and Alburni National Park (PNCV) located in the Campania region, where 28 sites of community interest (SICs) have been established by the EU Habitats Directive (92/43/EEC), two specimens of sea lamprey (Petromyzon marinus, Linnaeus, 1758) were detected for the first time. The specimens were genetically characterized through the sequencing of the mtDNA control region locus. The study highlighted the significant importance of the Campania region for lampreys, which,concerning Lampetra sp., was found to have peculiar genetic characteristics and unique alleles that have not been described elsewhere. Furthermore, the recognition of the sea lamprey, P. marinus, emphasized the value of this area, especially in terms of laying the groundwork for future habitat protection strategies

Mapping Orientational Order of Charge-Probed Domains in a Semiconducting Polymer

Structure–property relationships are of fundamental importance to develop quantitative models describing charge transport in organic semiconductor based electronic devices, which are among the best candidates for future portable and lightweight electronic applications. While microstructural investigations, such as those based on X-rays, electron microscopy, or polarized optical probes, provide necessary information for the rationalization of transport in macromolecular solids, a general model predicting how charge accommodates within structural maps is not yet available. Therefore, techniques capable of directly monitoring how charge is distributed when injected into a polymer film and how it correlates to structural domains can help fill this gap. Supported by density functional theory calculations, here we show that polarized charge modulation microscopy (p-CMM) can unambiguously and selectively map the orientational order of the only conjugated segments that are probed by mobile charge in the few nanometer thick accumulation layer of a high-mobility polymer-based field-effect transistor . Depending on the specific solvent-induced microstructure within the accumulation layer, we show that p-CMM can image charge-probed domains that extend from submicrometer to tens of micrometers size, with markedly different degrees of alignment. Wider and more ordered p-CMM domains are associated with improved carrier mobility, as extracted from device characteristics. This observation evidences the unprecedented opportunity to correlate, directly in a working device, electronic properties with structural information on those conjugated segments involved in charge transport at the buried semiconductor–dielectric interface of a field-effect device

Light-Triggered Electron Transfer between a Conjugated Polymer and Cytochrome C for Optical Modulation of Redox Signaling

Protein reduction/oxidation processes trigger and finely regulate a myriad of physiological and pathological cellular functions. Many biochemical and biophysical stimuli have been recently explored to precisely and effectively modulate intracellular redox signaling, due to the considerable therapeutic potential. Here, we propose a first step toward an approach based on visible light excitation of a thiophene-based semiconducting polymer (P3HT), demonstrating the realization of a hybrid interface with the Cytochrome c protein (CytC), in an extracellular environment. By means of scanning electrochemical microscopy and spectro-electrochemistry measurements, we demonstrate that, upon optical stimulation, a functional interaction between P3HT and CytC is established. Polymer optical excitation locally triggers photoelectrochemical reactions, leading to modulation of CytC redox activity, either through an intermediate step, involving reactive oxygen species formation, or via a direct photoreduction process. Both processes are triggered by light, thus allowing excellent spatiotemporal resolution, paving the way to precise modulation of protein redox signaling

Studies of YBCO Strip Lines under Voltage Pulses: Optimisation of the Design of Fault Current Limiters

We present experimental results on the behaviour of a superconducting YBCO/Au meander of length L submitted to short circuit tests with constant voltage pulses. The meander, at the beginning of the short-circuit, is divided in two regions; one, with a length L1 proportional to the applied voltage, which first switches into a highly dissipative state (HDS) while the rest remains superconducting. Then the rest of the meander will progressively switch into the normal state due to the propagation of this HDS (few m/s) from both ends. The part L1 has to initially support a power density proportional to r.Jp^2 (r is the resistivity of the bilayer and Jp the peak current density). To avoid local excessive dissipation of power and over heating on one part of the wafer in the initial period, we have developed a novel design in order to distribute the dissipating section of the meander into many separated small dissipative zones. Furthermore the apparent propagation velocity of these dissipative zones is increased by the number of propagation fronts. We will show results obtained on 3kW (300V, 10A) FCL on a 2" wafer which confirm the benefits of this new design.Comment: 4 pages, 6 figures; presented at the Applied Superconductivity Conference in Houston, TX (August 2002); to be published in IEEE Trans. On Appl. Supercon

Current and historical genetic variability of native brown trout populations in a southern alpine ecosystem: implications for future management

The highly polymorphic taxon European brown trout (genus Salmo) has high phenotypic plasticity, displaying a complex pattern of morphological and life-history variation, contributing to taxonomic confusion. Three main mitochondrial lineages (Adriatic, Mediterranean, and marmoratus) developed during the Pleistocene climatic events in the southern Alpine ecosystem. Here, the natural distribution of native brown trout S. trutta is controversial, complicated by introductions of the Atlantic strain. By investigating museum vouchers, this study aimed to retrace the historical presence of brown trout in the southern Alpine ecosystem before the beginning of mass introductions, which occurred since the middle of the 19th century. By examining the combination of historical and current genetic variability, this study aims to depict the actual impact of introductions of the introduced strain, increasing knowledge and informing conservation strategies and future management plans. The molecular approaches selected were: (i) sequencing of the mitochondrial control region and (ii) genotyping of the nuclear gene LDH-C1*. Vouchers dated the presence of the native Adriatic strain since 1821, while current genetic variability showed the widespread signature of introgression, a consequence of several decades of introductions. Focused plans to preserve local lineages are urgently needed, including short-term solution to avoid complete pauperization of this ecosystem

Hall-effect studies in YBa2Cu3O7/PrBa2Cu3O7 superlattices

We measured the resistivity and the Hall coefficient RH in a series of YBa2Cu3O7/PrBa2Cu3O7 multilayers. We found no systematic change of the transport properties with decreasing layer thicknesses down to one unit cell. The resistivity and RH evaluated for the YBa2Cu3O7 layers are slightly higher than in bulk material, suggesting a small decrease of the carrier density in the multilayers. However, we observe no change in the Hall number 1/eRH when the thickness of the YBa1Cu3O7 layers decreases, so that the lowering of Tc observed in the superlattices cannot simply be related to a change in the carrier density. Furthermore, we find that the temperature dependence of RH is very similar to that of bulk materials

Patterning of ultrathin YBCO nanowires using a new focused-ion-beam process

Manufacturing superconducting circuits out of ultrathin films is a challenging task when it comes to patterning complex compounds, which are likely to be deteriorated by the patterning process. With the purpose of developing high-T$_c$ superconducting photon detectors, we designed a novel route to pattern ultrathin YBCO films down to the nanometric scale. We believe that our method, based on a specific use of a focused-ion beam, consists in locally implanting Ga^{3+} ions and/or defects instead of etching the film. This protocol could be of interest to engineer high-T$_c$ superconducting devices (SQUIDS, SIS/SIN junctions and Josephson junctions), as well as to treat other sensitive compounds.Comment: 13 pages, 7 figure

Micro- and Nanopatterned Silk Substrates for Antifouling Applications

A major problem of current biomedical implants is the bacterial colonization and subsequent biofilm formation, which seriously affects their functioning and can lead to serious post-surgical complications. Intensive efforts have been directed toward the development of novel technologies that can prevent bacterial colonization while requiring minimal antibiotics doses. To this end, biocompatible materials with intrinsic antifouling capabilities are in high demand. Silk fibroin, widely employed in biotechnology, represents an interesting candidate. Here, we employ a soft-lithography approach to realize micro- and nanostructured silk fibroin substrates, with different geometries. We show that patterned silk film substrates support mammal cells (HEK-293) adhesion and proliferation, and at the same time, they intrinsically display remarkable antifouling properties. We employ Escherichia coli as representative Gram-negative bacteria, and we observe an up to 66% decrease in the number of bacteria that adhere to patterned silk surfaces as compared to control, flat silk samples. The mechanism leading to the inhibition of biofilm formation critically depends on the microstructure geometry, involving both a steric and a hydrophobic effect. We also couple silk fibroin patterned films to a biocompatible, optically responsive organic semiconductor, and we verify that the antifouling properties are very well preserved. The technology described here is of interest for the next generation of biomedical implants, involving the use of materials with enhanced antibacterial capability, easy processability, high biocompatibility, and prompt availability for coupling with photoimaging and photodetection techniques

Role of Interfaces in the Proximity Effect in Anisotropic Superconductors

We report measurements of the critical temperature of YBCO-Co doped YBCO Superconductor-Normal bilayer films. Depending on the morphology of the S-N interface, the coupling between S and N layers can be turned on to depress the critical temperature of S by tens of degrees, or turned down so the layers appear almost totally decoupled. This novel effect can be explained by the mechanism of quasiparticle transmission into an anisotropic superconductor.Comment: 13 pages, 3 figure

Conjugated polymers mediate intracellular Ca2+ signals in circulating endothelial colony forming cells through the reactive oxygen species-dependent activation of Transient Receptor Potential Vanilloid 1 (TRPV1)

Endothelial colony forming cells (ECFCs) represent the most suitable cellular substrate to induce revascularization of ischemic tissues. Recently, optical excitation of the light-sensitive conjugated polymer, regioregular Poly (3-hexyl-thiophene), rr-P3HT, was found to stimulate ECFC proliferation and tube formation by activating the non-selective cation channel, Transient Receptor Potential Vanilloid 1 (TRPV1). Herein, we adopted a multidisciplinary approach, ranging from intracellular Ca2+ imaging to pharmacological manipulation and genetic suppression of TRPV1 expression, to investigate the effects of photoexcitation on intracellular Ca2+ concentration ([Ca2+](i)) in circulating ECFCs plated on rr-P3HT thin films. Polymer-mediated optical excitation induced a long-lasting increase in [Ca2+](i) that could display an oscillatory pattern at shorter light stimuli. Pharmacological and genetic manipulation revealed that the Ca2+ response to light was triggered by extracellular Ca2+ entry through TRPV1, whose activation required the production of reactive oxygen species at the interface between rr-P3HT and the cell membrane. Light-induced TRPV1-mediated Ca2+ entry was able to evoke intracellular Ca2+ release from the endoplasmic reticulum through inositol-1,4,5-trisphosphate receptors, followed by store-operated Ca2+ entry on the plasma membrane. These data show that TRPV1 may serve as a decoder at the interface between rr-P3HT thin films and ECFCs to translate optical excitation in pro-angiogenic Ca2+ signals