Higher alcohol synthesis over Rh catalysts: conditioning of Rh/N-CNTs by Co and Mn entrapped in the support

Rh nanoparticles supported on commercial non-purified N-doped CNTs (NCNTs) containing residual CNT growth catalyst have been studied in hydrogenation of CO to higher alcohols. It has been found that Co and Mn residues in NCNTs are not inert, but change the catalyst under reaction conditions and efficiently promote the catalyst resulting in both increasing activity and selectivity to C2+ alcohols with time on stream.BMBF, 03X0204C, CarboKat - Einsatz von Carbon Nanotubes als Katalysator und Katalysatorträge

Towards FAIR Data in Heterogeneous Catalysis Research

This poster elaborates on the challenges of developing a database for heterogeneous catalysis research and FAIRmat’s effort in tayloring NOMAD schemas and search interface for catalysis researchers as well as demonstrating first steps of an ontology development for catalysis. The poster has been presented in the 1st Conference on Research Data Infrastructure (CoRDI 2023) which took place on Septmeber 12 - 14, 2023, in Karlsruhe, Germany.Funding statement: FAIRmat is a consortium of German National Research Data Infrastructure (NDFI) funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – project 460197019

The impact of steam on the electronic structure of the selective propane oxidation catalyst MoVTeNb oxide (orthorhombic M1 phase)

The selective propane oxidation catalyst MoVTeNb oxide M1 was investigated by microwave conductivity, synchrotron X-ray photoelectron, soft X-ray absorption and resonant photoelectron spectroscopy under reaction conditions to identify the influence of steam on the electronic bulk and surface properties. Steam significantly increases both the conversion of propane and the selectivity to the target product acrylic acid. The increased catalytic performance comes along with a decreased conductivity, a modification of the surface chemical and electronic structure with an enrichment of covalently bonded V5+ species to the extent of Mo6+, a decreased work function and hence polarity of the surface and a modified valence band structure. The higher degree of covalency in metal oxide bonds affects the mobility of the free charge carriers, and hence explains the decrease of the conductivity with steam. Furthermore we could prove that a subsurface space charge region depleted in electrons and thus an upward bending of the electronic band structure are induced by the reaction mixture, which is however not dependent on the steam content

Inhibition of the photoinduced structural phase transition in the excitonic insulator Ta2_2NiSe5_5

Femtosecond time-resolved mid-infrared reflectivity is used to investigate the electron and phonon dynamics occurring at the direct band gap of the excitonic insulator Ta$_2$NiSe$_5$ below the critical temperature of its structural phase transition. We find that the phonon dynamics show a strong coupling to the excitation of free carriers at the \Gamma\ point of the Brillouin zone. The optical response saturates at a critical excitation fluence $F_C = 0.30~\pm~0.08$~mJ/cm$^2$ due to optical absorption saturation. This limits the optical excitation density in Ta$_2$NiSe$_5$ so that the system cannot be pumped sufficiently strongly to undergo the structural change to the high-temperature phase. We thereby demonstrate that Ta$_2$NiSe$_5$ exhibits a blocking mechanism when pumped in the near-infrared regime, preventing a nonthermal structural phase transition

High performance (VOx)(n)-( TiOx)(m)/SBA-15 catalysts for the oxidative dehydrogenation of propane

Grafted VxOy catalysts for oxidative dehydrogenation of propane (ODP) have been studied due to their potential high performance and as model catalysts in the past. We report on a positive synergetic effect capable of considerably enhancing the propene productivities above reported performances. The most productive catalysts were found at metal loadings (V + Ti) close to the monolayer coverage. The 4V/13Ti/SBA-15 catalyst presented a considerably high productivity (6–9 kgpropene kgcat−1 h−1). Moreover, with this catalyst, propene productivity only slightly decreased as a function of propane conversion, indicating that propene combustion toward COx occurs more slowly in comparison to other catalysts exhibiting high propene productivities. A detailed kinetic analysis of the 4V/13Ti/SBA-15 catalyst revealed that high vanadia and titania dispersions are required for high propene productivity.DFG, SFB 546, Struktur, Dynamik und Reaktivität von Übergangsmetalloxid-Aggregate

Inhibition of the photoinduced structural phase transition in the excitonic insulator Ta2NiSe5{\mathrm{Ta}}_{2}{\mathrm{NiSe}}_{5}

Femtosecond time-resolved midinfrared reflectivity is used to investigate the electron and phonon dynamics occurring at the direct band gap of the excitonic insulator Ta2NiSe5 below the critical temperature of its structural phase transition. We find that the phonon dynamics show a strong coupling to the excitation of free carriers at the Γ point of the Brillouin zone. The optical response saturates at a critical excitation fluence FC=0.30±0.08 mJ/cm2 due to optical absorption saturation. This limits the optical excitation density in Ta2NiSe5 so that the system cannot be pumped sufficiently strongly to undergo the structural change to the high-temperature phase. We thereby demonstrate that Ta2NiSe5 exhibits a blocking mechanism when pumped in the near-infrared regime, preventing a nonthermal structural phase transition

Transition-Metal-Doping of CaO as Catalyst for the OCM Reaction, a Reality Check

In this study, first-row transition metal-doped calcium oxide materials (Mn, Ni, Cr, Co., and Zn) were synthesized, characterized, and tested for the OCM reaction. Doped carbonate precursors were prepared by a co-precipitation method. The synthesis parameters were optimized to yield materials with a pure calcite phase, which was verified by XRD. EPR measurements on the doped CaO materials indicate a successful substitution of Ca2+ with transition metal ions in the CaO lattice. The materials were tested for their performance in the OCM reaction, where a beneficial effect towards selectivity and activity effect could be observed for Mn, Ni, and Zn-doped samples, where the selectivity of Co- and Cr-doped CaO was strongly reduced. The optimum doping concentration could be identified in the range of 0.04-0.10 atom%, showing the strongest decrease in the apparent activation energy, as well as the maximum increase in selectivity

Nanoparticles Supported on Sub-Nanometer Oxide Films : Scaling Model Systems to Bulk Materials

Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk. Synthetic sodium fluorohectorite, a layered silicate, when immersed into water spontaneously and repulsively swells to produce nematic suspensions of individual negatively charged nanosheets separated to more than 60 nm, while retaining parallel orientation. Into these galleries oppositely charged palladium nanoparticles were intercalated whereupon the galleries collapse. Individual and separated Pd nanoparticles were thus captured and sandwiched between nanosheets. As suggested by the model systems, the resulting catalyst performed better in the oxidation of carbon monoxide than the same Pd nanoparticles supported on external surfaces of hectorite or on a conventional Al2O3 support. XPS confirmed a shift of Pd 3d electrons to higher energies upon coverage of Pd nanoparticles with nanosheets to which we attribute the improved catalytic performance. DFT calculations showed increasing positive charge on Pd weakened CO adsorption and this way damped CO poisoning

Shape-dependent CO2 hydrogenation to methanol over Cu2O nanocubes supported on ZnO

The hydrogenation of CO2 to methanol over Cu/ZnO-based catalysts is highly sensitive to the surface composition and catalyst structure. Thus, its optimization requires a deep understanding of the influence of the pre-catalyst structure on its evolution under realistic reaction conditions, including the formation and stabilization of the most active sites. Here, the role of the pre-catalyst shape (cubic vs spherical) in the activity and selectivity of ZnO-supported Cu nanoparticles was investigated during methanol synthesis. A combination of ex situ, in situ, and operando microscopy, spectroscopy, and diffraction methods revealed drastic changes in the morphology and composition of the shaped pre-catalysts under reaction conditions. In particular, the rounding of the cubes and partial loss of the (100) facets were observed, although such motifs remained in smaller domains. Nonetheless, the initial pre-catalyst structure was found to strongly affect its subsequent transformation in the course of the CO2 hydrogenation reaction and activity/selectivity trends. In particular, the cubic Cu particles displayed an increased activity for methanol production, although at the cost of a slightly reduced selectivity when compared to similarly sized spherical particles. These findings were rationalized with the help of density functional theory calculations.Peer ReviewedPostprint (published version

Transition-Metal-Doping of CaO as Catalyst for the OCM Reaction, a Reality Check

In this study, first-row transition metal-doped calcium oxide materials (Mn, Ni, Cr, Co., and Zn) were synthesized, characterized, and tested for the OCM reaction. Doped carbonate precursors were prepared by a co-precipitation method. The synthesis parameters were optimized to yield materials with a pure calcite phase, which was verified by XRD. EPR measurements on the doped CaO materials indicate a successful substitution of Ca2+ with transition metal ions in the CaO lattice. The materials were tested for their performance in the OCM reaction, where a beneficial effect towards selectivity and activity effect could be observed for Mn, Ni, and Zn-doped samples, where the selectivity of Co- and Cr-doped CaO was strongly reduced. The optimum doping concentration could be identified in the range of 0.04-0.10 atom%, showing the strongest decrease in the apparent activation energy, as well as the maximum increase in selectivity.DFG, 390540038, EXC 2008: Unifying Systems in Catalysis "UniSysCat