17 research outputs found

    GROWTH OF A POPULATION OF Cabralea canjerana IN A NATURAL REGENERATION STAGE IN THE SECONDARY FOREST WITH USE OF THE LIBERATION

    Get PDF
    This work aimed to verify the influence of the liberation technique on the growth of a young population of Cabralea canjerana, based on this to determine the best size for the plants to be liberated and to verify the differences in growth between emergent and dominate plants. The liberation consisted of the clear cutting of all species different from the species of interest, with 90 trees from the species being liberated and 73 being kept in competition (control). The variables total height and diameter at 10 cm from the soil were previously and annually, for four years after the liberation, measured. At the end of the experiment the crown diameter, crown length and branch insertion height were measured and the trees were classified according the treatment and sociological position (emergent or dominated). The data were submitted to means tests in the statistical package SISVAR. Liberated plants showed a higher increase in diameter or height than not liberated trees. However, the increase gain in diameter and height is higher when realized in plants up to 100 cm high, especially if the plants are able to become emergent. Not liberated emergent trees showed higher branch insertion height in the stem, which in practice shows a higher proportion of stem free from nodes. Thus, it is concluded that the liberation stimulates the growth of young trees of C. canjerana

    Diametric increment modeling of Pinus taeda in function of the crown variables and competition index

    Get PDF
    The objective was to generate a periodic annual basal area increment (IPAG) model for Pinus taeda valid for stands located in Rio Grande do Sul and Paraná. Temporary plots were installed in stands of Cambará do Sul and Ponta Grossa, where the tree larger diameter was considered dominant in the sample. All tree diameters at breast height and total height were measured. The dominant trees was also measured the crown diameter, crown insertion height and crown length to calculate h/d ratio, crown proportion, crown formal, coverage ratio and crown/trunk diameter ratio. An increment core was obtained from each dominant tree to calculate the IPAG the last five years. The model was built by stepwise method in the statistical package SAS® and validated by regression constraints. The variables initial diameter, crown diameter, degree of slenderness, and competition index based on the total and relative basal area were selected. The model showed high determination coefficient and low standard error of the estimate. The statistical analysis showed no difference between actual and estimated curves, showing the developed model may be used in both analyzed sites and similar sites.Objetivou-se gerar um modelo de incremento periódico em área basal (IPAG) para Pinus taeda válido para povoamentos localizados no Rio Grande do Sul e Paraná. Foram instaladas parcelas temporárias em povoamentos de Cambará do Sul (RS) e Ponta Grossa (PR), em que a árvore de maior diâmetro foi considerada dominante na parcela. De todas as árvores, foi medido o diâmetro à altura do peito e altura total, e das dominantes foi medido também o diâmetro de copa, altura de inserção da copa e comprimento de copa, para o cálculo do grau de esbeltez, proporção de copa, formal de copa, índice de abrangência e saliência. Foi retirado um rolo de incremento de todas as árvores dominantes, para o cálculo do IPAG dos últimos cinco anos. O modelo foi construído pelo método stepwise, no pacote estatístico SAS® e validado pelas condicionantes da regressão. Foram selecionadas as variáveis diâmetro inicial, diâmetro de copa, grau de esbeltez e índice de competição baseado na área basal total e relativa. O modelo apresentou alto coeficiente de determinação e baixo erro padrão da estimativa, e a análise estatística não demonstrou diferença entre as curvas reais e estimada, evidenciando o uso do modelo em ambos os locais analisados e em locais semelhantes a eles

    Dinâmica do uso e cobertura do solo no vale do Rio Pardo, Rio Grande do Sul

    Get PDF
    The aims of this study were to evaluate rates of deforestation and forest regeneration in the time span between 1990 and 2014, furthermore to estimate land cover and use by the year of 2018 in the Rio Pardo Valley region. Landsat images were used for land cover and use classification and Dinamica EGO software was used to provide real and estimated transitions among land cover and use classes. Forested area increased at a rate of 0.58% by year. However, the rates of deforestation and forest regeneration are larger, between 3 and 6%. The model developed showed to be consistent throughout the study time span. The land cover and use map estimated for 2018 shows regions which are susceptible to deforestation and should be closely watched by local authorities.Os objetivos deste trabalho são determinar taxas de desmatamento e regeneração reais no período entre 1990 e 2014 e estimar mapas de uso e cobertura do solo para o ano de 2018 na região do Vale do Rio Pardo. Foram utilizadas imagens Landsat para a classificação do uso e cobertura do solo e o programa Dinamica EGO foi utilizado para determinar transições reais e estimadas entre as diferentes classes de uso do solo. A área florestal aumentou constantemente à uma taxa de 0,58% ao ano. No entanto, as taxas de desmatamento e regeneração são maiores, entre 3 e 6%. O modelo desenvolvido gerou estimativas consistentes ao longo do período estudado. O mapa de uso do solo estimado para 2018 indica regiões suscetíveis ao desmatamento que devem ser melhor observadas pelos órgãos de fiscalização

    INFLUÊNCIA DE MÉTODOS DE COLETA DE DADOS ESPECTRORRADIOMÉTRICOS SOB ÍNDICES DE VEGETAÇÃO EM EUCALIPTO

    Get PDF
    Objetivou-se verificar a influência de métodos de coleta de folhas em índices de vegetação: posição de coleta na copa, orientação cardeal e estação do ano em Eucalyptus grandis. Os dados foram coletados em dois povoamentos distintos em duas árvores dominantes cada. Foram coletadas 15 folhas em cada posição e em cada orientação, acrescidas de uma amostra de mesmo tamanho no centro. A coleta foi realizada em um único dia, das 13:00 as 15:00 horas. O material foi analisado com o espectrorradiômetro FieldSpec®3 e a resposta espectral de cada orientação e posição foi dada pela média da leitura espectral das folhas. Foram analisados 60 diferentes índices de vegetação de acordo com a literatura. Para avaliar o efeito da estação sobre os índices foram realizadas coletas nas quatro estações do ano, configurando 4 tratamentos. Foram utilizados modelos mistos para analisar a influência nos fatores (posição e estação) e sua interação. Os dados foram considerados aninhados em cada orientação, dentro de cada árvore e de cada área. A análise estatística foi realizada no software R com o pacote nlme. Dos índices de vegetação analisados, seis apresentaram dependência da posição/orientação e estação de coleta, sendo necessário em posteriores estudos a obediência de suas dependências

    Determinação da Distância de Dispersão Efetiva de Cabralea canjerana

    No full text
    Objetivou-se conhecer a distância de dispersão efetiva de Cabralea canjerana (Vell.) Mart. em um fragmento de Floresta Estacional. Foram alocadas parcelas de 5 m × 5 m em uma área com alta densidade de indivíduos regenerantes da espécie. Os indivíduos com altura maior que 30 cm e DAP menor que 15 cm foram contabilizados e tiveram suas coordenadas relativas conhecidas. Indivíduos com DAP maior que 15 cm foram considerados como produtores de sementes. A distância de dispersão foi calculada através da metodologia de Nathan & Muller-Landau (2000), sendo calculadas duas distâncias: distância de cada indivíduo em relação à matriz mais próxima e em relação à média das distâncias entre todas as matrizes. O pico de dispersão efetiva ocorre a uma distância média de 30 metros das árvores matrizes, sendo necessário três indivíduos produtores de sementes por hectare para se garantir a regeneração contínua da espécie

    MODELAGEM DO INCREMENTO DIAMÉTRICO DE Pinus taeda EM FUNÇÃO DE VARIÁVEIS DA COPA E ÍNDICES DE COMPETIÇÃO

    No full text
    The objective was to generate a periodic annual basal area increment (IPAG) model for Pinus taeda valid for stands located in Rio Grande do Sul and Paraná. Temporary plots were installed in stands of Cambará do Sul and Ponta Grossa, where the tree larger diameter was considered dominant in the sample. All tree diameters at breast height and total height were measured. The dominant trees was also measured the crown diameter, crown insertion height and crown length to calculate h/d ratio, crown proportion, crown formal, coverage ratio and crown/trunk diameter ratio. An increment core was obtained from each dominant tree to calculate the IPAG the last five years. The model was built by stepwise method in the statistical package SAS® and validated by regression constraints. The variables initial diameter, crown diameter, degree of slenderness, and competition index based on the total and relative basal area were selected. The model showed high determination coefficient and low standard error of the estimate. The statistical analysis showed no difference between actual and estimated curves, showing the developed model may be used in both analyzed sites and similar sites.Objetivou-se gerar um modelo de incremento periódico em área basal (IPAG) para Pinus taeda válido para povoamentos localizados no Rio Grande do Sul e Paraná. Foram instaladas parcelas temporárias em povoamentos de Cambará do Sul (RS) e Ponta Grossa (PR), em que a árvore de maior diâmetro foi considerada dominante na parcela. De todas as árvores, foi medido o diâmetro à altura do peito e altura total, e das dominantes foi medido também o diâmetro de copa, altura de inserção da copa e comprimento de copa, para o cálculo do grau de esbeltez, proporção de copa, formal de copa, índice de abrangência e saliência. Foi retirado um rolo de incremento de todas as árvores dominantes, para o cálculo do IPAG dos últimos cinco anos. O modelo foi construído pelo método stepwise, no pacote estatístico SAS® e validado pelas condicionantes da regressão. Foram selecionadas as variáveis diâmetro inicial, diâmetro de copa, grau de esbeltez e índice de competição baseado na área basal total e relativa. O modelo apresentou alto coeficiente de determinação e baixo erro padrão da estimativa, e a análise estatística não demonstrou diferença entre as curvas reais e estimada, evidenciando o uso do modelo em ambos os locais analisados e em locais semelhantes a eles

    MORPHOLOGICAL AND PHYSIOLOGICAL PLASTICITY OF SAPLINGS OF Cabralea canjerana (Vell.) MART. IN DIFFERENT LIGHT CONDITIONS

    No full text
    ABSTRACT This work was carried out to verify the plasticity of saplings of Cabralea canjerana plants and their capacity to adapt to different light environments by means of morphological and physiological characteristics. For this, 12 plants of a secondary Deciduous Seasonal Forest fragment were selected, six growing under canopy and six in full sun. Trees were classified according to their sociological position as emergent and dominated. The leaves were classified as apical, intermediate and basal according to their position in the canopy. The variables measured were: total number of leaves, width, length, thickness, leaf area and dry mass of leaflets; content of chlorophyll a and b and carotenoids. Emergent leaflets of the upper position of the canopy in full sun, which are considered the most exposed to luminosity, presented xeromorphic characteristics such as leaflet size reduction, greater limbus thickness, smaller leaf area and lower content of chlorophyll b. The similarity in the dry mass and pigment content demonstrates that the photosynthetic activity of the C. canjerana plants analyzed is not being affected by the different conditions of the environment, which demonstrates the plasticity of the species and its capacity of development in several light conditions

    Regeneração natural de espécies comerciais em uma área antropizada na Floresta Estacional Decidual, RS

    No full text
    As áreas remanescentes da floresta estacional decidual, por sua localização e função ecológica devem ser preservadas e recuperadas. Para isto, é necessário obter informações sobre a estrutura destas florestas. Objetivou-se estudar a regeneração natural de espécies comerciais em uma área antropizada em ambientes de Floresta Estacional Decidual, no município de Silveira Martins, RS. Utilizou-se amostragem censitária para espécies Parapiptadenia rigida (Benth.) Brenan, Cabralea canjerana (Vell.) Mart., Cedrela fissilis Vell., Enterolobium contortisiliquum (Vell.) Morong e Cordia americana (L.) Gottshling & J.E.Mill., em 0,36 ha. A regeneração foi classificada por classes de altura: Classe I (< 100 cm), Classe II (100 a 200 cm) e Classe III (201 a 300 cm). A densidade do estrato regenerante para as espécies consideradas foi de 1306 ind.ha-1. Parapiptadenia rigida foi a espécie predominante e com maior número de indivíduos por classe de altura. As espécies na área amostrada na comunidade em questão apresentaram os padrões de dispersão agregado e uniforme. O estudo contribui para o entendimento da dinâmica do processo de regeneração natural das espécies na Floresta Estacional Decidual.
    corecore