34 research outputs found
GEMAS: source, distribution patterns and geochemical behaviour of Ge in agricultural and grazing land soils at European continental scale
Agricultural soil (Ap-horizon, 0-20 cm) and grazing land soil (Gr-horizon, 0-10 cm) samples were collected from a large part of Europe (33 countries, 5.6 million km2) as part of the GEMAS (Geochemical Mapping of Agricultural and grazing land Soil) soil mapping project. GEMAS soil data have been used to provide a general view of element mobility and source rocks at the continental scale, either by reference to average crustal abundances or to normalized patterns of element mobility during weathering processes
Use of GEMAS data for risk assessment of cadmium in European agricultural and grazing land soil under the REACH Regulation
Over 4000 soil samples were collected for the “Geochemical Mapping of Agricultural and Grazing Land Soil of Europe” (GEMAS) project carried out by the EuroGeoSurveys Geochemistry Expert Group. Cadmium concentrations are reported for the <2 mm fraction of soil samples from regularly ploughed fields (agricultural soil, Ap, 0 - 20 cm, N - 2218) and grazing land soil (Gr, 0 - 10 cm, N - 2127)
Mapping and understanding Earth: Open access to digital geoscience data and knowledge supports societal needs and UN sustainable development goals
Open access to harmonised digital data describing Earth’s surface and subsurface holds immense value for society. This paper highlights the significance of open access to digital geoscience data ranging from the shallow topsoil or seabed to depths of 5 km. Such data play a pivotal role in facilitating endeavours such as renewable geoenergy solutions, resilient urban planning, supply of critical raw materials, assessment and protection of water resources, mitigation of floods and droughts, identification of suitable locations for carbon capture and storage, development of offshore wind farms, disaster risk reduction, and conservation of ecosystems and biodiversity. EuroGeoSurveys, the Geological Surveys of Europe, have worked diligently for over a decade to ensure open access to harmonised digital European geoscience data and knowledge through the European Geological Data Infrastructure (EGDI). EGDI acts as a data and information resource for providing wide-ranging geoscience data and research, as this paper demonstrates through selected research data and information on four vital natural resources: geoenergy, critical raw materials, water, and soils. Importantly, it incorporates near real-time remote and in-situ monitoring data, thus constituting an invaluable up-to-date database that facilitates informed decision-making, policy implementation, sustainable resource management, the green transition, achieving UN Sustainable Development Goals (SDGs), and the envisioned future of digital twins in Earth sciences. EGDI and its thematic map viewer are tailored, continuously enhanced, and developed in collaboration with all relevant researchers and stakeholders. Its primary objective is to address societal needs by providing data for sustainable, secure, and integrated management of surface and subsurface resources, effectively establishing a geological service for Europe. We argue that open access to surface and subsurface geoscience data is crucial for an efficient green transition to a net-zero society, enabling integrated and coherent surface and subsurface spatial planning
Geochemistry of Rare Earth Elements in Bedrock and Till, Applied in the Context of Mineral Potential in Sweden
The Rare Earth Element (REE) mineralizations are not so “rare” in Sweden. They normally occur associated and hosted within granitic crystalline bedrock, and in mineral deposits together with other base and trace metals. Major REE-bearing mineral deposit types are the apatite-iron oxide mineralizations in Norrbotten (e.g., Kiruna) and Bergslagen (e.g., Grängesberg) ore regions, the various skarn deposits in Bergslagen (e.g., Riddarhyttan-Norberg belt), hydrothermal deposits (e.g., Olserum, Bastnäs) and alkaline-carbonatite intrusions such as the Norra Kärr complex and Alnö. In this study, analytical data of samples collected from REE mineralizations during the EURARE project are compared with bedrock and till REE geochemistry, both sourced from databases available at the Geological Survey of Sweden. The positive correlation between REE composition in the three geochemical data groups allows better understanding of REE distribution in Sweden, their regional discrimination, and genetic classification. Data provides complementary information about correlation of LREE and HREE in till with REE content in bedrock and mineralization. Application of principal component analysis enables classification of REE mineralizations in relation to their host. These results are useful in the assessment of REE mineral potential in areas where REE mineralizations are poorly explored or even undiscovered
fluid inclusions in mantle xenoliths from Lower Silesia (SW Poland) : formation conditions and decompression history
Low density geochemical mapping and mineral exploration: application of the mineral system concept
Distribution of lithium in agricultural and grazing land soils at European continental scale (GEMAS project)
International audienceThe environmental chemistry of Li has received attention because Li has been shown to have numerous and important implications for human health and agriculture and the stable isotope composition of lithium is a powerful geochemical tool that provides quantitative information about Earth processes such as sediment recycling, global chemical weathering and its role in the carbon cycle, hydrothermal alteration, and groundwater evolution. However, the role of bedrock sources, weathering and climate changes in the repartition of Li at the continental scale have been scarcely investigated. Agricultural soil (Ap-horizon, 0–20 cm) and grazing land soil (Gr-horizon, 0–10 cm) samples were collected from a large part of Europe (33 countries, 5.6 million km2) as a part of the GEMAS (GEochemical Mapping of Agricultural and grazing land Soil) soil mapping project. GEMAS soil data have been used to provide a general view of element mobility and source rocks at the continental scale, either by reference to average crustal abundances or to normalized patterns of element mobility during weathering processes. The survey area includes a diverse group of soil parent materials with varying geological history, a wide range of climate zones, and landscapes. The concentrations of Li in European soil were determined by ICP-MS after a hot aqua regia extraction, and their spatial distribution patterns generated by means of a GIS software.Due to the partial nature of the aqua regia extraction, the mean concentration of Li in the European agricultural soil (ca 11.4 mg/kg in Ap and Gr soils) is about four times lower than in the Earth's upper continental crust (41 mg/kg).The combined plot histogram - density trace one- dimensional scattergram - boxplot of the aqua regia data displays the univariate data distribution of Li. The one-dimensional scattergram and boxplot highlight the existence of many outliers at the lower end of the Li distribution and very few at the upper end. Though the density trace, histogram and boxplot suggest a slight skew, the data distributions are still rather symmetrical in the log-scale. The median values of the Ap and Gr samples do overlap, demonstrating they are not statistically different at the 5% significance level.The maps of Li in the aqua regia extraction show a distinct difference between northern Europe with predominantly low concentrations (median 6.4 mg/kg Li) and southern Europe with significant higher values (median 15 mg/kg Li). The maximum extent of the last glaciation is visible as a discrete concentration break on the maps. The principal Li anomalies occur spatially associated with the granitic rocks, Li-pegmatites and their weathering products throughout Europe, e.g. in the Central Sweden (Scandinavian Clay Belt) and in the western part of the Alpine Region (higher Li concentrations). Even the new Li-deposit near Wolfsberg, Austria is marked by a clear anomaly. Finally, high values occurring over limestone areas in southern Europe are due to secondary Li enrichment attributable to climatic conditions
Geochemical fingerprinting and source discrimination of agricultural soils at continental scale
International audience2108 agricultural soil samples (Ap-horizon, 0–20 cm) were collected in Europe (33 countries, area 5.6 million km2) as part of the recently completed GEMAS (GEochemical Mapping of Agricultural and grazing land Soil) soil mapping project. GEMAS soil data have been used to provide a general view of element origin and mobility with a main focus on source parent material (and source rocks) at the continental scale, either by reference to average crustal abundances or to normalized patterns of element mobility during weathering processes. The survey area covers a large territory with diverse types of soil parent materials, with distinct geological history and a wide range of climate zones, and landscapes.To normalize the chemical composition of European agricultural soil, mean values and standard deviation of the selected elements have been compared to model compositions of the upper continental crust (UCC) and mean European river suspended sediment. Some elements are enriched relative to the UCC (Al, P, Pb, Zr,) whereas others, such as Mg, Na and Sr are depleted. The concept of the UCC extended normalization pattern has been applied to selected elements. The mean values of Rb, K, Y, Ti, Al, Si, Zr, Ce and Fe are very similar to the values from the UCC model, even when standard deviations indicate slight enrichment or depletion. Zirconium has the best fit to the UCC model using both mean value and standard deviation. Lead and Cr are enriched in European soil when compared to the UCC model, but their standard deviation values span a large, particularly towards very low values, which can be interpreted as a lithological effect.GEMAS soil data have been normalized to Al and Na, taking into account the main lithologies of the UCC, in order to discriminate provenance sources. Additionally, sodium normalization highlights variations related to the soluble and insoluble behavior of some elements (e.g., K, Rb versus Ti, Al, Si, V, Y, Zr, Ba, and La, respectively), their reactivity (e.g, Fe, Mn, Zn) and association with carbonates (e.g., Ca and Sr). Maps of Europe showing the spatial distribution of normalized compositions and element ratios reveal difficulties with the use of classical element ratios because of the large lithological differences in compositions of soil parent material. The ratio maps and color composite images extracted from the GEMAS data can help to discriminate the main lithologies in Europe at the regional scale but need to be used with caution due to the complexity of superimposed processes responsible for the soil chemical composition
Tectonometamorphic evolution of the Areskutan Nappe-Caledonian history revealed by SIMS U-Pb zircon geochronology
Secondary ionization mass spectrometry (SIMS) U–Pb dating of zircons from the Åreskutan Nappe in the central part of the Seve Nappe Complex of western central Jämtland provides new constraints on the timing of granulite–amphibolite-facies metamorphism and tectonic stacking of the nappe during the Caledonian orogeny. Peak-temperature metamorphism in garnet migmatites is constrained to c. 442 ± 4 Ma, very similar to the ages of leucogranites at 442 ± 3 and 441 ± 4 Ma. Within a migmatitic amphibolite, felsic segregations crystallized at 436 ± 2 Ma. Pegmatites, cross-cutting the dominant Caledonian foliation in the Nappe, yield 428 ± 4 and 430 ± 3 Ma ages. The detrital zircon cores in the migmatites and leucogranites provide evidence of Late Palaeoproterozoic, Mesoproterozoic to Early Neoproterozoic source terranes for the metasedimentary rocks. The formation of the ductile and hot Seve migmatites, with their inverted metamorphism and thinning towards the hinterland, can be explained by an extrusion model in which the allochthon stayed ductile for a period of at least 10 million years during cooling from peak-temperature metamorphism early in the Silurian. In our model, Baltica–Laurentia collision occurred in the Late Ordovician–earliest Silurian, with emplacement of the nappes far on to the Baltoscandian platform during the Silurian and early Devonian, Scandian Orogeny lasting until c. 390 Ma