Surface composition of mixed self-assembled monolayers on Au by infrared attenuated total reflection spectroscopy

Abstract Self-assembled monolayers (SAMs) of N-(2-hydroxyethyl)-3-mercaptopropanamide (NMPA) were synthesized directly on the surface of electron-beam evaporated Au films, starting from 3-mercaptopropionic acid (3MPA) via ethyl-3-(3-dimethylamino-propyl)carbodiimide/N-hydroxysulfosuccinimide sodium salt (EDC/NHSS) coupling with ethanolamine hydrochloride. The influence on the reaction yield of the acidity of EDC/NHSS solutions (pH = 5.6 or 4.8) was assessed by exploiting the high surface sensitivity of infrared attenuated total reflection spectroscopy. The light-matter interaction was modeled in the framework of a matrix formalism considering the complete multi-layer sample structure. A comparison between the relative intensity of the main absorption bands, associated with amide I and carbonyl stretching of carboxylic acid or amide II vibrations, with a calibration curve obtained from the measurement of mixed 3MPA/NMPA SAMs, show that the more acid solution is 16% more efficient. This is mostly due to the higher protonation of the 3MPA

Electrochemical and X-ray Photoelectron Spectroscopy Surface Characterization of Interchain-Driven Self-Assembled Monolayer (SAM) Reorganization

Herein, we report a combined strategy encompassing electrochemical and X-ray photoelectron spectroscopy (XPS) experiments to investigate self-assembled monolayer (SAM) conformational reorganization onto an electrode surface due to the application of an electrical field. In particular, 3-mercaptopriopionic acid SAM (3MPA SAM) modified gold electrodes are activated with a 1-ethyl-3- (3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysulfosuccinimide (NHSS) (EDC-NHSS) mixture by shortening the activation time, from 2 h to 15/20 min, labelled as Protocol-A, -B and -C, respectively. This step, later followed by a deactivation process with ethanolamine (EA), plays a key role in the reaction yields (formation of N-(2-hydroxyethyl)-3-mercaptopropanamide, NMPA) but also in the conformational rearrangement observed during the application of the electrical field. This study aims at explaining the high performance (i.e., single-molecule detection at a large electrode interface) of bioelectronic devices, where the 3MPA-based SAM structure is pivotal in achieving extremely high sensing performance levels due to its interchain interaction. Cyclic voltammetry (CV) experiments performed in K4Fe(CN)6:K3Fe(CN)6 for 3MPA SAMs that are activated/deactivated show similar trends of anodic peak current (IA) over time, mainly related to the presence of interchain hydrogen bonds, driving the conformational rearrangements (tightening of SAMs structure) while applying an electrical field. In addition, XPS analysis allows correlation of the deactivation yield with electrochemical data (conformational rearrangements), identifying the best protocol in terms of high reaction yield, mainly related to the shorter reaction time, and not triggering any side reactions. Finally, Protocol-C’s SAM surface coverage, determined by CV in H2SO4 and differential pulse voltammetry (DPV) in NaOH, was 1.29 * 1013 molecules cm2, being similar to the bioreceptor surface coverage in single-molecule detection at a large electrode interface

Bioelectrochemically Triggered Apoferritin-based Bionanoreactors:Synthesis of CdSe Nanoparticles and Monitoring with Leaky Waveguides

Herein, we describe a novel method for producing cadmium-selenide nanoparticles (CdSe NPs) with controlled size using apoferritin as a bionanoreactor triggered by local pH change at the electrode/solution interface. Apoferritin is known for its reversible self-assembly at alkaline pH. The pH change is induced electrochemically by reducing O2 through the application of sufficiently negative voltages and bioelectrochemically through O2 reduction catalyzed by laccase, co-immobilized with apoferritin on the electrode surface. Specifically, a Ti electrode is modified with (3-Aminopropyl)triethoxysilane, followed by glutaraldehyde cross-linking (1.5% v/v in H2O) of apoferritin (as the bionanoreactor) and laccase (as the local pH change triggering system). This proposed platform offers a universal approach to controlling the synthesis of semiconductor NPs within a bionanoreactor solely driven by (bio)electrochemical inputs. The CdSe NPs obtained through different synthetic approaches, namely electrochemical and bioelectrochemical, were characterized spectroscopically (UV-Vis, Raman, XRD) and morphologically (TEM). Finally, we conducted online monitoring of CdSe NPs formation within the apoferritin core by integrating the electrochemical system with LWs. The quantity of CdSe NPs produced through bioelectrochemical means was determined to be 2.08 ± 0.12 mg after 90 minutes of voltage application in the presence of O2. TEM measurements revealed that the bioelectrochemically synthesized CdSe NPs have a diameter of 4 ± 1 nm, accounting for 85% of the size distribution, a result corroborated by XRD data. Further research is needed to explore the synthesis of nanoparticles using different biological nanoreactors, as the process can be challenging due to the elevated buffer capacitance of biological media

Bioelectrochemically Triggered Apoferritin-based Bionanoreactors:Synthesis of CdSe Nanoparticles and Monitoring with Leaky Waveguides

Herein, we describe a novel method for producing cadmium-selenide nanoparticles (CdSe NPs) with controlled size using apoferritin as a bionanoreactor triggered by local pH change at the electrode/solution interface. Apoferritin is known for its reversible self-assembly at alkaline pH. The pH change is induced electrochemically by reducing O2 through the application of sufficiently negative voltages and bioelectrochemically through O2 reduction catalyzed by laccase, co-immobilized with apoferritin on the electrode surface. Specifically, a Ti electrode is modified with (3-Aminopropyl)triethoxysilane, followed by glutaraldehyde cross-linking (1.5% v/v in H2O) of apoferritin (as the bionanoreactor) and laccase (as the local pH change triggering system). This proposed platform offers a universal approach to controlling the synthesis of semiconductor NPs within a bionanoreactor solely driven by (bio)electrochemical inputs. The CdSe NPs obtained through different synthetic approaches, namely electrochemical and bioelectrochemical, were characterized spectroscopically (UV-Vis, Raman, XRD) and morphologically (TEM). Finally, we conducted online monitoring of CdSe NPs formation within the apoferritin core by integrating the electrochemical system with LWs. The quantity of CdSe NPs produced through bioelectrochemical means was determined to be 2.08 ± 0.12 mg after 90 minutes of voltage application in the presence of O2. TEM measurements revealed that the bioelectrochemically synthesized CdSe NPs have a diameter of 4 ± 1 nm, accounting for 85% of the size distribution, a result corroborated by XRD data. Further research is needed to explore the synthesis of nanoparticles using different biological nanoreactors, as the process can be challenging due to the elevated buffer capacitance of biological media

Wearable and Flexible Fibrosis Cystic Tag with Potentiometric Chloride Activity Sensing

In this paper, we present a pioneer design of a wearable and flexible potentiometric chloride activity sensing platform. This platform is intended to provide real-time support for the diagnosis of Cystic Fibrosis by gathering and correlating historical clinical data of patients under control. To ensure wearable and comfortable functionality, a flexible support has employed for both the multi-working electrochemical electrodes and the smart electronics. The proposed electronic system embeds a microcontroller, enabling potential reasoning on the acquired data and patient history, while a microchip antenna ensures the wireless transmission of measurements and diagnosis to a remote healthcare center. The characterization of the realized electrodes and the electronic readout are here shown: the results are compliant with the requirements of the standard medical equipment

Enzyme based field effect transistor: State‐of‐the‐art and future perspectives

Abstract The review discloses the historical and technological evolution of enzyme‐based field‐effect transistors (EnFETs) underlying the importance of gate electrode modification toward the implementation of novel FETs configurations such as extended‐gate FET (EG‐FETs) or EG organic FETs (EG‐OFETs). The working principle of the EnFETs as postulated by Bergveld in 1970, who defined the EnFET as an ion‐selective FET (ISFET) modified with enzyme‐membrane, is also discussed considering the analytical equations related to the EnFET output response. For each category, namely EnFETs, EG‐FETs, and EG‐OFETs, we reviewed the key devices’ configurations that addressed the research in this field in the last 40 years with particular attention to the analytical figures of merit

Electropolymerized molecularly imprinted polypyrrole film for dimethoate sensing: investigation on template removal after the imprinting process

The development of ultrasensitive analytical detection methods for organophosphorus pesticides such as dimethoate (DMT) plays a key role in healthy food production. DMT is an inhibitor of acetylcholinesterase (AChE), which can lead to the accumulation of acetylcholine and result in symptoms related to the autonomous and central nervous systems. Herein, we report the first spectroscopic and electrochemical study on template removal after an imprinting process from a polypyrrole-based molecularly imprinted polymer (PPy-MIP) film for the detection of DMT. Several template removal procedures were tested and evaluated using X-ray photoelectron spectroscopy. The most effective procedure was achieved in 100 mM NaOH. The proposed DMT PPy-MIP sensor exhibits a limit of detection of (8 +/- 2) x 10(-12) M

Water-Based Conductive Ink Formulations for Enzyme-Based Wearable Biosensors

Herein, this work reports the first example of second-generation wearable biosensor arrays based on a printed electrode technology involving a water-based graphite ink, for the simultaneous detection of l-lactate and d-glucose. The water-based graphite ink is deposited onto a flexible polyethylene terephthalate sheet, namely stencil-printed graphite (SPG) electrodes, and further modified with [Os(bpy)2(Cl)(PVI)10] as an osmium redox polymer to shuttle the electrons from the redox center of lactate oxidase from Aerococcus viridans (LOx) and gluocose oxidase from Aspergillus niger (GOx). The proposed biosensor array exhibits a limit of detection as low as (9.0 ± 1.0) × 10−6 m for LOx/SPG-[Os(bpy)2(Cl)(PVI)10] and (3.0 ± 0.5) × 10−6 m for GOx/SPG-[Os(bpy)2(Cl)(PVI)10], a sensitivity as high as 1.32 uA mm−1 for LOx/SPG-[Os(bpy)2(Cl)(PVI)10] and 28.4 uA mm−1 for GOx/SPG-[Os(bpy)2(Cl)(PVI)10]. The technology is also selective when tested in buffer and artificial sweat and is endowed with an operational/storage stability of ≈80% of the initial signal retained after 20 days. Finally, the proposed array is integrated in a wristband and successfully tested for the continuous monitoring of l-lactate and d-glucose in a healthy volunteer during daily activity. This is foreseen as a real-time wearable device for sport-medicine and healthcare applications

Water‐Based Conductive Ink Formulations for Enzyme‐Based Wearable Biosensors

Abstract Herein, this work reports the first example of second‐generation wearable biosensor arrays based on a printed electrode technology involving a water‐based graphite ink, for the simultaneous detection of l‐lactate and d‐glucose. The water‐based graphite ink is deposited onto a flexible polyethylene terephthalate sheet, namely stencil‐printed graphite (SPG) electrodes, and further modified with [Os(bpy)2(Cl)(PVI)10] as an osmium redox polymer to shuttle the electrons from the redox center of lactate oxidase from Aerococcus viridans (LOx) and gluocose oxidase from Aspergillus niger (GOx). The proposed biosensor array exhibits a limit of detection as low as (9.0 ± 1.0) × 10−6 m for LOx/SPG‐[Os(bpy)2(Cl)(PVI)10] and (3.0 ± 0.5) × 10−6 m for GOx/SPG‐[Os(bpy)2(Cl)(PVI)10], a sensitivity as high as 1.32 μA mm−1 for LOx/SPG‐[Os(bpy)2(Cl)(PVI)10] and 28.4 μA mm−1 for GOx/SPG‐[Os(bpy)2(Cl)(PVI)10]. The technology is also selective when tested in buffer and artificial sweat and is endowed with an operational/storage stability of ≈80% of the initial signal retained after 20 days. Finally, the proposed array is integrated in a wristband and successfully tested for the continuous monitoring of l‐lactate and d‐glucose in a healthy volunteer during daily activity. This is foreseen as a real‐time wearable device for sport‐medicine and healthcare applications