The influence of dust properties on the mass loss in pulsating AGB stars

We are currently studying carbon based dust types of relevance for carbon-rich AGB stars, to obtain a better understanding of the influence of the optical and chemical properties of the grains on the mass loss of the star. An investigation of the complex interplay between hydrodynamics,radiative transfer and chemistry has to be based on a better knowledge of the micro-physics of the relevant dust species.Comment: 4 pages, 2 figures. Proceedings for IAU Colloquium 185 "Radial and Nonradial Pulsations as Probes of Stellar Physics

Uni-directional polymerization leading to homochirality in the RNA world

The differences between uni-directional and bi-directional polymerization are considered. The uni-directional case is discussed in the framework of the RNA world. Similar to earlier models of this type, where polymerization was assumed to proceed in a bi-directional fashion (presumed to be relevant to peptide nucleic acids), left-handed and right-handed monomers are produced via an autocatalysis from an achiral substrate. The details of the bifurcation from a racemic solution to a homochiral state of either handedness is shown to be remarkably independent of whether the polymerization in uni-directional or bi-directional. Slightly larger differences are seen when dissociation is allowed and the dissociation fragments are being recycled into the achiral substrate.Comment: 9 pages, 4 figures, submitted to Astrobiolog

Dust grain properties in atmospheres of AGB stars

We present self-consistent dynamical models for dust driven winds of carbon-rich AGB stars. The models are based on the coupled system of frequency-dependent radiation hydrodynamics and time-dependent dust formation. We investigate in detail how the wind properties of the models are influenced by the micro-physical properties of the dust grains that enter as parameters. The models are now at a level where it is necessary to be quantitatively consistent when choosing the dust properties that enters as input into the models. At our current level of sophistication the choice of dust parameters is significant for the derived outflow velocity, the degree of condensation and the estimated mass loss rates of the models. In the transition between models with and without mass-loss the choice ofmicro-physical parameters turns out to be very significant for whether a particular set of stellar parameters will give rise to a dust-driven mass loss or not.Comment: 10 pages, 3 figures. To appear in: Modelling of Stellar Atmospheres, N.E. Piskunov, W.W. Weiss, D.F. Gray (eds.), IAU Symposium Vol. xxx. Proceedings for the IAU Symposium 210, Uppsala, June 200

Observation of Microlensing towards the Galactic Spiral Arms. EROS II 2 year survey

We present the analysis of the light curves of 8.5 million stars observed during two seasons by EROS (Experience de Recherche d'Objets Sombres), in the galactic plane away from the bulge. Three stars have been found that exhibit luminosity variations compatible with gravitational microlensing effects due to unseen objects. The corresponding optical depth, averaged over four directions, is 0.38 (+0.53, -0.15) 10^{-6}. All three candidates have long Einstein radius crossing times ($\sim$ 70 to 100 days). For one of them, the lack of evidence for a parallax or a source size effect enabled us to constrain the lens-source % geometric configuration. Another candidate displays a modulation of the magnification, which is compatible with the lensing of a binary source. The interpretation of the optical depths inferred from these observations is hindered by the imperfect knowledge of the distance to the target stars. Our measurements are compatible with expectations from simple galactic models under reasonable assumptions on the target distances.Comment: 11 pages, 13 figures, accepted by A&A in Aug 9

Finite element modeling and analysis of tires

Predicting the response of tires under various loading conditions using finite element technology is addressed. Some of the recent advances in finite element technology which have high potential for application to tire modeling problems are reviewed. The analysis and modeling needs for tires are identified. Reduction methods for large-scale nonlinear analysis, with particular emphasis on treatment of combined loads, displacement-dependent and nonconservative loadings; development of simple and efficient mixed finite element models for shell analysis, identification of equivalent mixed and purely displacement models, and determination of the advantages of using mixed models; and effective computational models for large-rotation nonlinear problems, based on a total Lagrangian description of the deformation are included

Free vibrations of laminated composite elliptic plates

The free vibrations are studied of laminated anisotropic elliptic plates with clamped edges. The analytical formulation is based on a Mindlin-Reissner type plate theory with the effects of transverse shear deformation, rotary inertia, and bending-extensional coupling included. The frequencies and mode shapes are obtained by using the Rayleigh-Ritz technique in conjunction with Hamilton's principle. A computerized symbolic integration approach is used to develop analytic expressions for the stiffness and mass coefficients and is shown to be particularly useful in evaluating the derivatives of the eigenvalues with respect to certain geometric and material parameters. Numerical results are presented for the case of angle-ply composite plates with skew-symmetric lamination

Coreshine in L1506C - Evidence for a primitive big-grain component or indication for a turbulent core history?

The recently discovered coreshine effect can aid in exploring the core properties and in probing the large grain population of the ISM. We discuss the implications of the coreshine detected from the molecular cloud core L1506C in the Taurus filament for the history of the core and the existence of a primitive ISM component of large grains becoming visible in cores. The coreshine surface brightness of L1506C is determined from IRAC Spitzer images at 3.6 micron. We perform grain growth calculations to estimate the grain size distribution in model cores similar in gas density, radius, and turbulent velocity to L1506C. Scattered light intensities at 3.6 micron are calculated for a variety of MRN and grain growth distributions to compare with the observed coreshine. For a core with the overall physical properties of L1506C, no detectable coreshine is predicted for an MRN size distribution. Extending the distribution to grain radii of about 0.65 $\mu$m allows to reproduce the observed surface brightness level in scattered light. Assuming the properties of L1506C to be preserved, models for the growth of grains in cores do not yield sufficient scattered light to account for the coreshine within the lifetime of the Taurus complex. Only increasing the core density and the turbulence amplifies the scattered light intensity to a level consistent with the observed coreshine brightness. The grains could be part of primitive omni-present large grain population becoming visible in the densest part of the ISM, could grow under the turbulent dense conditions of former cores, or in L1506C itself. In the later case, L1506C must have passed through a period of larger density and stronger turbulence. This would be consistent with the surprisingly strong depletion usually attributed to high column densities, and with the large-scale outward motion of the core envelope observed today.Comment: 6 pages, 6 figures, accepted for publication in Astronomy & Astrophysic

Extinction calculations of multi-sphere polycrystalline graphitic clusters - A comparison with the 2175 AA peak and between a rigorous solution and discrete-dipole approximations

Certain dust particles in space are expected to appear as clusters of individual grains. The morphology of these clusters could be fractal or compact. In this paper we study the light scattering by compact and fractal polycrystalline graphitic clusters consisting of touching identical spheres. We compare three general methods for computing the extinction of the clusters in the wavelength range 0.1 - 100 micron, namely, a rigorous solution (Gerardy & Ausloos 1982) and two different discrete-dipole approximation methods -- MarCODES (Markel 1998) and DDSCAT (Draine & Flatau 1994). We consider clusters of N = 4, 7, 8, 27,32, 49, 108 and 343 particles of radii either 10 nm or 50 nm, arranged in three different geometries: open fractal (dimension D = 1.77), simple cubic and face-centred cubic. The rigorous solution shows that the extinction of the fractal clusters, with N < 50 and particle radii 10 nm, displays a peak within 2% of the location of the observed interstellar extinction peak at ~4.6 inverse micron; the smaller the cluster, the closer its peak gets to this value. By contrast, the peak in the extinction of the more compact clusters lie more than 4% from 4.6 inverse micron. At short wavelengths (0.1 - 0.5 micron), all the methods show that fractal clusters have markedly different extinction from those of non-fractal clusters. At wavelengths > 5 micron, the rigorous solution indicates that the extinction from fractal and compact clusters are of the same order of magnitude. It was only possible to compute fully converged results of the rigorous solution for the smaller clusters, due to computational limitations, however, we find that both discrete-dipole approximation methods overestimate the computed extinction of the smaller fractal clusters.Comment: Corrections added in accordance with suggestions by the referee. 12 pages, 12 figures. Accepted for publication in Astronomy & Astrophysic

Electrolysis-based diaphragm actuators

This work presents a new electrolysis-based microelectromechanical systems (MEMS) diaphragm actuator. Electrolysis is a technique for converting electrical energy to pneumatic energy. Theoretically electrolysis can achieve a strain of 136 000% and is capable of generating a pressure above 200 MPa. Electrolysis actuators require modest electrical power and produce minimal heat. Due to the large volume expansion obtained via electrolysis, small actuators can create a large force. Up to 100 µm of movement was achieved by a 3 mm diaphragm. The actuator operates at room temperature and has a latching and reversing capability