The upper normal limit of serum alanine aminotransferase in Golestan Province, Northeast Iran

Background: The objective of this study was to determine the upper normal limit of serum alanine aminotransferase level in a population-based study in Golestan Province, northeast Iran. Methods: From the randomly invited individuals (2,292), 698 out of the 916 males and 1,351 out of the 1,376 females participated in the study (participation rate: 76.2 and 98.1, respectively). One hundred and twenty-one participants were excluded due to positive hepatitis B surface antigen or hepatitis C virus antibody and/or drinking more than 20 grams of alcohol per day. A total of 1,928 participants (1300 females) were included. The upper normal limit of serum alanine aminotransferase level was defined as the 95th percentile. Results: The upper normal limit of serum alanine aminotransferase level in normal weight and nondiabetics was significantly lower than the total study group (36 versus 45 U/L). Serum alanine aminotransferase level was independently associated with male gender, body mass index, and diabetes mellitus (OR=2.05; 95Cl: 1.44 - 2.94, OR=2.76; 95Cl: 1.84 - 4.13, and OR=2.96; 95Cl: 1.56-5.61, respectively). Conclusion: Considering the lower calculated upper normal limit in normal weight nondiabetic participants in this study, we recommend setting new upper normal limit for serum alanine aminotransferase level, It seems reasonable to set upper normal limit for serum alanine aminotransferase level in males and females separately

The upper normal limit of serum alanine aminotransferase in Golestan Province, Northeast Iran

Background: The objective of this study was to determine the upper normal limit of serum alanine aminotransferase level in a population-based study in Golestan Province, northeast Iran. Methods: From the randomly invited individuals (2,292), 698 out of the 916 males and 1,351 out of the 1,376 females participated in the study (participation rate: 76.2 and 98.1, respectively). One hundred and twenty-one participants were excluded due to positive hepatitis B surface antigen or hepatitis C virus antibody and/or drinking more than 20 grams of alcohol per day. A total of 1,928 participants (1300 females) were included. The upper normal limit of serum alanine aminotransferase level was defined as the 95th percentile. Results: The upper normal limit of serum alanine aminotransferase level in normal weight and nondiabetics was significantly lower than the total study group (36 versus 45 U/L). Serum alanine aminotransferase level was independently associated with male gender, body mass index, and diabetes mellitus (OR=2.05; 95Cl: 1.44 - 2.94, OR=2.76; 95Cl: 1.84 - 4.13, and OR=2.96; 95Cl: 1.56-5.61, respectively). Conclusion: Considering the lower calculated upper normal limit in normal weight nondiabetic participants in this study, we recommend setting new upper normal limit for serum alanine aminotransferase level, It seems reasonable to set upper normal limit for serum alanine aminotransferase level in males and females separately

An audit of sturgeon reproduction in Iran over the years 1998 -- 2002

Iranian Fisheries Institutes in the north of the country are involved in the reproduction, culture and release of five species of sturgeon fingerlings into the Caspian Sea. The species are Acipenser persicus, A. guldenstadti, A. nudiventris and A. stellatus and Huso huso. Shahid Beheshti Fisheries Centre as the first commercial hatchery started its activities in 1972 in Rasht, Guilan Province of Iran. The centre achieved a production ceiling of 21.6 million fingerlings in 1997 and increased it to 24.5 million fingerlings in 1998. It is anticipated that the centre will achieve a threshold of 45 millions fingerlings in the next few years. During 1997-2002, the centre has increased its extent from 377 hectares to 887 hectares For Huso huso production, 17 specimens were caught in 1998, of which 10 were injected that produced 1.08 million fingerlings and in 2002, the number of caught and injected Huso huso were 29 and 21 respectively, that resulted in production and release of 2.4 million fingerlings. A number of 1062 A. persicus breeders were caught in 1998 of which 581 individuals were injected with hypophysis extract resulting in production and release of 22.5 million fingerlings. Of 538 injected individuals from among a total 802 breeder fish caught in 2002, a number of 12.3 million fingerlings were produced and released into the sea. The catch for Acipenser stellatus in 1998 was 193 breeders that produced 623000 fingerlings. In 2002, the catch increased to 290 breeders, of which 67 received injections to produce 1.3 million fingerlings. A total number of 0.67 million fingerlings of A. guldenstadti was produced in 1998 which was increased to 1.78 millions in 2002. For Acipenser nudiventris, the number of fingerlings produced in 1998 was 0.4 which was increased to 1.56 millions in 2002

On the generalization of linear least mean squares estimation to quantum systems with non-commutative outputs

The purpose of this paper is to study the problem of generalizing the Belavkin-Kalman filter to the case where the classical measurement signal is replaced by a fully quantum non-commutative output signal. We formulate a least mean squares estimation problem that involves a non-commutative system as the filter processing the non-commutative output signal. We solve this estimation problem within the framework of non-commutative probability. Also, we find the necessary and sufficient conditions which make these non-commutative estimators physically realizable. These conditions are restrictive in practice.Comment: 31 page

Interpolation Approach to Hamiltonian-varying Quantum Systems and the Adiabatic Theorem

Quantum control could be implemented by varying the system Hamiltonian. According to adiabatic theorem, a slowly changing Hamiltonian can approximately keep the system at the ground state during the evolution if the initial state is a ground state. In this paper we consider this process as an interpolation between the initial and final Hamiltonians. We use the mean value of a single operator to measure the distance between the final state and the ideal ground state. This measure could be taken as the error of adiabatic approximation. We prove under certain conditions, this error can be precisely estimated for an arbitrarily given interpolating function. This error estimation could be used as guideline to induce adiabatic evolution. According to our calculation, the adiabatic approximation error is not proportional to the average speed of the variation of the system Hamiltonian and the inverse of the energy gaps in many cases. In particular, we apply this analysis to an example on which the applicability of the adiabatic theorem is questionable.Comment: 12 pages, to appear in EPJ Quantum Technolog

Quantum communication between trapped ions through a dissipative environment

We study two trapped ions coupled to the axial phonon modes of a one-dimensional Coulomb crystal. This system is formally equivalent to the "two spin-boson" model. We propose a scheme to dynamically generate a maximally entangled state of two ions within a decoherence-free subspace. Here the phononic environment of the trapped ions, whatever its temperature and number of modes, serves as the entangling bus. The efficient production of the pure singlet state can be exploited to perform short-ranged quantum communication which is essential in building up a large-scale quantum computer.Comment: 4 pages, 2 figure

Scalable ion traps for quantum information processing

We report on the design, fabrication, and preliminary testing of a 150 zone array built in a `surface-electrode' geometry microfabricated on a single substrate. We demonstrate transport of atomic ions between legs of a `Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates use of a basic component design library that can be quickly assembled to form structures optimized for a particular experiment

Exotic quark effects on the Higgs sector of the USSM at the LHC

The Higgs sector of the U(1)-extended supersymmetric model is studied with great detail. We calculate the masses of the Higgs bosons at the one-loop level. We also calculate at the one-loop level the gluon-involving processes for the productions and decays of the scalar Higgs bosons of the model at the energy of the CERN Large Hadron Collider (LHC), where the radiative corrections due to the loops of top, bottom, and exotic quarks and their scalar partners are taken into account. We find that the exotic quark and exotic scalar quarks in the model may manifest themselves at the LHC, since the production of the heaviest scalar Higgs boson via gluon fusion processes is mediated virtually by the loops of exotic quark and exotic scalar quarks, for a reasonable parameter set of the model.Comment: 36 pages, 13 figures, JP

Evaluating the interaction of 308-nm xenon chloride excimer laser with human dentin and enamel hard tissues

Background: The pulsed output of the 308 nm XeCl laser and its photoablation action rather than photothermal action offers the ability to remove dental hard tissues with minimal generation of heat in the tissue. Materials and Methods: A total of 20 human molar teeth (ten teeth used as enamel samples and ten teeth used as dentin samples after removing the enamel tissue from their crowns) were irradiated by the laser. The crown of each sample was regarded as a cube which its lateral sides were exposed in 2Hz frequency without water cooling. Also, 18 holes for all enamel samples and 18 holes for all dentin samples were obtained. Three different amounts of energy were selected as a variable factor with 6 different numbers of pulses in each energy. The images of these holes were prepared by optic and computer combining, and the amounts of the ablation depth and effective ablation area were calculated using the MATLAB software. Results: The amounts of ablation depth were increased with increasing the number of pulses for both enamel and dentin tissues. The amounts of ablation depth were also increased with increasing the amounts of energy for both enamel and dentin tissues. The greater amounts of ablation depth and effective ablation area were observed in the dentin tissue rather than the enamel tissue. The borders of created holes were reported sharp and clear. Conclusion: The application of the XeCl laser for hard tissue removal and cavity preparation can be possible after some certain modifications