Inflow Measurements Made with a Laser Velocimeter on a Helicopter Model in Forward Flight. Volume 1: Rectangular Planform Blades at an Advance Ration of 0.15

An experimental investigation was conducted in the 14- by 22-Foot Subsonic Tunnel at NASA Langley to measure the inflow into a scale model helicopter rotor in forward flight (microinf = 0.15). The measurements were made with a two component Laser Velocimeter (LV) one chord above the plane formed by the path of the rotor tips (tip path plane). A conditional sampling technique was employed to determine the azimuthal position of the rotor at the time each velocity measurement was made so that the azimuthal fluctuations in velocity could be determined. Measurements were made at a total of 147 separate locations in order to clearly define the inflow character. This data is presented without analysis. In order to increase the availability of the resulting data, both the mean and azimuthally dependent values are included as part of this report on two 5.25 inch floppy disks in Microsoft Corporation MS-DOS format

Arrangement of Elastic Fibres in the Integument of Domesticated Mammals

The hairy skin of important domesticated mammals (12 species) was studied with scanning electron microscopy, transmission electron microscopy, laser scanning microscopy, and several light microscopical methods, to obtain more information about three-dimensional elastic fibre arrangement. It was obvious that there is a basic construction scheme of the elastic fibre meshwork as present in the upper and mid-dermis, with special regard to the size, number, and grouping of hair follicles. In the densely-haired species, in particular, a typical elastic mat with horizontal fibres is formed. In many of the sparsely-haired animals, the upper and mid-dermis show a sponge-like elastic system. In the rather massive, collagen-rich skin of large species, the lower two thirds of the dermis without hair follicles only possess a loosely-structured elastic network, but thick elastic sheets are found at the border zone with the hypodermis. Specific features appear with regard to the type of mechanical strain exerted, different body regions, varying hair follicle density, or as connected with the anchoring of the hair follicle complex, blood vessels, and nerves

Inflow measurements made with a laser velocimeter on a helicopter model in forward flight. Volume 4: Tapered planform blades at an advance ratio of 0.15

An experimental investigation was conducted in the 14- by 22-Foot Subsonic Tunnel at NASA Langley Research Center to measure the inflow into the scale model helicopter rotor in forward flight (mu sub infinity = 0.15). The measurements were made with a two-component Laser Velocimeter (LV) one chord above the plane formed by the path of the rotor tips (tip path plane). A conditional sampling technique was employed to determine the position of the rotor at the time that each velocity measurement was made so that the azimuthal fluctuations in velocity could be determined. Measurements were made at a total of 146 separate locations in order to clearly define the inflow character. This data is presented herein without analysis. In order to increase the availability of the resulting data, both the mean and azimuthally dependent values are included as part of this report on two 5.25 inch floppy disks in MS-DOS format

Inflow measurement made with a laser velocimeter on a helicopter model in forward flight. Volume 5: Tapered planform blades at an advance ratio of 0.23

An experimental investigation was conducted in the 14- by 22-Foot Subsonic tunnel at NASA Langley Research Center to measure the inflow into a scale model helicopter rotor in forward flight (mu sub inf = 0.23). The measurements were made with a two component Laser Velocimeter (LV) one chord above the plane formed by the path of the blade tips. A conditional sampling technique was employed to determine the position of the rotor at the time that each velocity measurement was made so that the azimuthal fluctuations in velocity could be determined. Measurements were made at a total of 168 separate locations in order to clearly define the inflow character. This data is presented without analysis. In order to increase the availability of the resulting data, both the mean and azimuthally dependenet values are included as part of this report on two 5.25 inch floppy disks in Microsoft Corporation MS-DOS format

Dose-response relationship of fibrous dusts in intraperitoneal studies.

The relationship between the number of fibers injected intraperitoneally and the occurrence of peritoneal mesotheliomas in rats was investigated using data from a series of carcinogenicity studies with several fibrous dusts. Based on observed tumor incidences ranging between 10 and 90%, the hypothesis of a common slope of dose-response relationships (parallel probit lines in probit analysis) cannot be rejected. In general, parallelism of probit lines is considered an indication of a common mode of action. Analysis of the shape of the dose-response relationship, with one apparent exception, shows virtually linear or superlinear behavior, i.e., from these data, there is no indication of a decrease in carcinogenic potency of an elementary carcinogenic unit at lower doses

Inflow measurement made with a laser velocimeter on a helicopter model in forward flight. Volume 2: Rectangular planform blades at an advance ratio of 0.23

An experimental investigation was conducted in the 14- by 22-Foot Subsonic Tunnel at NASA Langley Research Center to measure the inflow into a scale model helicopter rotor in forward flight (mu sub infinity = 0.23). The measurements were made with a two-component Laser Velocimeter (LV) one chord above the plane formed by the path of the rotor tips (tip path plane). A conditional sampling technique was employed to determine the azimuthal position of the rotor at the time that each velocity measurement was made so that the azimuthal fluctuations in velocity could be determined. Measurements were made at a total of 180 separate locations in order to clearly define the inflow character. This data is presented without analysis

Photon Structure and Quantum Fluctuation

Photon structure derives from quantum fluctuation in quantum field theory to fermion and anti-fermion, and has been an experimentally established feature of electrodynamics since the discovery of the positron. In hadronic physics, the observation of factorisable photon structure is similarly a fundamental test of the quantum field theory Quantum Chromodynamics (QCD). An overview of measurements of hadronic photon structure in e+e- and ep interactions is presented, and comparison made with theoretical expectation, drawing on the essential features of photon fluctuation into quark and anti-quark in QCD.Comment: 29 pages, 15 figures, to appear in Philosophical Transactions of the Royal Society of London (Series A: Mathematical, Physical and Engineering Sciences

Irreversible time-dependent rheological behavior of cement slurries : constitutive model and experiments

Over the last few decades, much focus has been given to investigating the reversible rheological behavior of thixotropic materials, but the description of the rheology of materials undergoing an irreversible process is still challenging. In this work, the time-dependent rheological behavior of a cement slurry is investigated. Different rheometric experiments are performed to evaluate the structure breakdown under shear, cement gelation, and curing process. A recently proposed thixotropic elasto-viscoplastic model [de Souza Mendes, Soft Matter 7, 2471-2483 (2011)] is modified to account for irreversible effects, which can be either of a chemical or physical nature, making the current model capable of describing reversible and irreversible processes with a single structure parameter. The parameters of the model are estimated from constant shear rate tests and from the flow curve of the fresh cement slurry. The model predictions are compared to step-down and step-up in stress experiments, and the results show that the model successfully describes experimental data obtained. Interesting phenomena are observed and discussed, including (i) thixotropic behavior during the dormant period, (ii) shear banding, (iii) irreversible changes in cement slurry rheology after the hydration reactions accelerate, and (iv) the existence of a characteristic time for the transition from a thixotropic-yield-stress material to a solid during curing. The predictive capability of the new model includes bifurcation, shear banding, stress overshoots, effects of chemical reactions, and irreversible shear degradation. It is argued that the ideas employed in the present work can be used to incorporate irreversible effects into other thixotropic models, giving rise to the possibility of describing the transient rheological behavior of complex materials in an unprecedented fashion. (c) 2019 The Society of Rheology

An SU(3) model for octet baryon and meson fragmentation

The production of the octet of baryons and mesons in e^+ e^- collisions is analysed, based on considerations of SU(3) symmetry and a simple model for SU(3) symmetry breaking in fragmentation functions. All fragmentation functions, D_q^h(x, Q^2), describing the fragmentation of quarks into a member of the baryon octet (and similarly for fragmentation into members of the meson octet) are expressed in terms of three SU(3) symmetric functions, \alpha(x, Q^2), \beta(x, Q^2), and \gamma(x, Q^2). With the introduction of an SU(3) breaking parameter, \lambda, the model is successful in describing hadroproduction data at the Z pole. The fragmentation functions are then evolved using leading order evolution equations and good fits to currently available data at 34 GeV and at 161 GeV are obtained.Comment: 24 pages LaTeX file including 11 postscript figure file