Analytical techniques in pharmaceutical analysis: A review

AbstractThe development of the pharmaceuticals brought a revolution in human health. These pharmaceuticals would serve their intent only if they are free from impurities and are administered in an appropriate amount. To make drugs serve their purpose various chemical and instrumental methods were developed at regular intervals which are involved in the estimation of drugs. These pharmaceuticals may develop impurities at various stages of their development, transportation and storage which makes the pharmaceutical risky to be administered thus they must be detected and quantitated. For this analytical instrumentation and methods play an important role. This review highlights the role of the analytical instrumentation and the analytical methods in assessing the quality of the drugs. The review highlights a variety of analytical techniques such as titrimetric, chromatographic, spectroscopic, electrophoretic, and electrochemical and their corresponding methods that have been applied in the analysis of pharmaceuticals

Heterogeneous Catalysis to Drive the Waste-to-Pharma Concept: From Furanics to Active Pharmaceutical Ingredients

A perspective on the use of heterogeneous catalysis to drive the waste-to-pharma concept is provided in this contribution based on the conversion of furanics to active pharmaceutical ingredients (APIs). The provided overview of the concept in this perspective article has been exemplified for two key molecule examples: Ancarolol and Furosemide

High interfacial charge separation in visible-light active Z- scheme g-C3N4/MoS2 heterojunction: Mechanism and degradation of sulfasalazine

Examination of highly proficient photoactive materials for the degradation of antibiotics from the aqueous solution is the need of the hour. In the present study, a 2D/2D binary junction GCM, formed between graphitic-carbon nitride (g-C3N4) and molybdenum disulphide (MoS2), was fabricated using facile hydrothermal method and its photo-efficacy was tested for the degradation of sulfasalazine (SUL) from aqueous solution under visible-light irradiation. Morphological analysis indicated the nanosheets arrangement of MoS2 and g-C3N4. The visible-light driven experiments indicated that 97% antibiotic was degraded by GCM-30% within 90 min which was found to be quite high than pristine g-C3N4 and MoS2 at solution pH of 6, GCM-30% dose of 20 mg, and SUL concentration of 20 mgL-1. The degradation performance of GCM-30% was selectively improved due to enhanced visible-light absorption, high charge carrier separation, and high redox ability of the photogenerated charges which was induced by the effective Z-scheme 2D/2D heterojunction formed between g-C3N4 and MoS2. The reactive radicals as determined by the scavenging study were •O2-, and h+. A detailed degradation mechanism of SUL by GCM-30% was also predicted based on the detailed examination of the band gaps of g-C3N4 and MoS2

Comparative Investigation of the Physicochemical Properties of Chars Produced by Hydrothermal Carbonization, Pyrolysis, and Microwave-Induced Pyrolysis of Food Waste

This work presents a comparative study of the physicochemical properties of chars derived by three thermochemical pathways, namely: hydrothermal carbonization, HTC (at 180, 200 and 220 °C), pyrolysis, PY, (at 500, 600 and 700 °C) and microwave assisted pyrolysis, MW (at 300, 450 and 600 W). The mass yield of HTC samples showed a decrease (78.7 to 26.7%) as the HTC temperature increased from 180 to 220 °C. A similar decreasing trend in the mass yield was also observed after PY (28.45 to 26.67%) and MW (56.45 to 22.44%) of the food waste mixture from 500 to 700 °C and 300 to 600 W, respectively. The calorific value analysis shows that the best among the chars prepared by three different heating methods may be ranked according to the decreasing value of the heating value as: PY500, MW300, and HTC180. Similarly, a decreasing trend in H/C values was observed as: PY500 (0.887), MW300 (0.306), and HTC180 (0.013). The scanning electron microscope (SEM) analyses revealed that the structure of the three chars was distinct due to the different temperature gradients provided by the thermochemical processes. The results clearly show that the suitable temperature for the HTC and PY of food waste was 180 °C and 500 °C, respectively, while the suitable power for the MW of food waste was 300 WFunding: This research was funded by National Plan for Science, Technology and Innovation (MAAR-IFAH), King Abdulaziz City for Science and Technology, Kingdom of Saudi Arabia, Award Number 14-ENV665-02.Scopu

Physicochemical properties and combustion kinetics of food waste derived hydrochars

In this work, simulated food waste (15% white bread, 15% palm dates (without seeds), 5% boiled egg (without shells), 20% spent tea leaves, 20% spent coffee ground, and 25% banana peel in parts weight) was subjected to hydrothermal carbonization (HTC) at 180, 200 and 220 °C for 120 min. The mass yield and energy yield of the resultant hydrochars viz. HTC180, HTC200, and HTC220 were 69.46, 68.50, 65.35% and 88.91, 87.68, 84.30%, respectively. Among the hydrochars produced, HTC220 had the highest heating value (HHV: 23.61 MJ/kg), while the food waste had a HHV of 18.17 MJ/kg. Activation energy for the combustion of food waste and HTC220 was determined by modelling the thermogravimetric data using the Arrhenius equation and was found to be in the range of 29.98 to 33.51 kJ/mol and 16.52 to 25.47 kJ/mol, respectively. The densification ratio for the three hydrochar samples varied slightly (1.28–1.29). The results indicate that the hydrochar produced from food waste could be a potential to substitute coal combustion.King Abdulaziz City for Science and Technology - grant no. 14-ENV665-02

Thermal and light irradiation effect on the electrocatalytic performance of Hemoglobin modified Co3O4-g-C3N4 nanomaterials for oxygen evolution reaction

The oxygen evolution reaction (OER) plays a key role in the water splitting process and a high energy conversion efficiency is essential for the definitive advance of hydrogen-based technologies. Unfortunately, the green and sustainable development of electrocatalysts for water oxidation is nowadays a real challenge. Herein, a successful mechanochemical method is proposed for the synthesis of a novel hemoglobin (Hb) modified Co3O4/g-C3N4 composite nanomaterial. The controlled incorporation of cobalt entities as well as Hb functionalization, without affecting the g-C3N4 nanoarchitecture, was evaluated using different physicochemical techniques, such as X-ray diffraction, N2-physisorption, scanning electron microscopy, UV-visible spectroscopy and X-ray photoelectron spectroscopy. The beneficial effect of the resulting ternary bioconjugate together with the influence of the temperature and light irradiation was investigated by electrochemical analysis. At 60 °C and under light exposition, this electrocatalyst requires an overpotential of 370 mV to deliver a current density of 10 mA·cm−2, showing a Tafel slope of 66 mV·dec−1 and outstanding long-term stability for 600 OER cycles. This work paves a way for the controlled fabrication of multidimensional and multifunctional bio-electrocatalysts

Chromium removal from aqueous solution using bimetallic Bi\u3csup\u3e0\u3c/sup\u3e/Cu\u3csup\u3e0\u3c/sup\u3e-based nanocomposite biochar

Chromium (Cr), due to its greater contamination in aquifers and distinct eco-toxic impacts, is of greater environmental concern. This study aimed to synthesize nanocomposites of almond shells biochar (BC) with zerovalent bismuth and/or copper (Bi0/BC, Cu0/BC, and Bi0–Cu0/BC) for the removal of Cr from aqueous solution. The synthesized nanocomposites were investigated using various characterization techniques such as XRD, FTIR spectroscopy, SEM, and EDX. The Cr removal potential by the nanocomposites was explored under different Cr concentrations (25–100 mg/L), adsorbent doses (0.5–2.0 g/L), solution pH (2–8), and contact time (10–160 min). The above-mentioned advanced techniques verified successful formation of Bi0/Cu0 and their composite with BC. The synthesized nanocomposites were highly effective in the removal of Cr. The Bi0–Cu0/BC nano-biocomposites showed higher Cr removal efficiency (92%) compared to Cu0/BC (85%), Bi0/BC (76%), and BC (67%). The prepared nanocomposites led to effective Cr removal at lower Cr concentrations (25 mg/L) and acidic pH (4.0). The Cr solubility changes with pH, resulting in different degrees of Cr removal by Bi0–Cu0/BC, with Cr(VI) being more soluble and easier to adsorb at low pH levels and Cr(III) being less soluble and more difficult to adsorb at high pH levels. The experimental Cr adsorption well fitted with the Freundlich adsorption isotherm model (R 2 \u3e 0.99) and pseudo-second-order kinetic model. Among the prepared nanocomposites, the Bi0–Cu0/BC showed greater stability and reusability. It was established that the as-synthesized Bi0–Cu0/BC nano-biocomposite showed excellent adsorption potential for practical Cr removal from contaminated water

Coal-Based Activated Carbon via Microwave-Assisted ZnCl2 Activation for Methyl Violet 2B Dye Removal: Optimization, Desirability Function, and Adsorption Mechanism

© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).The Researchers Supporting Project No. (RSP2023R1), King Saud University, Riyadh, Saudi ArabiaPeer ReviewedIn this work, activated carbon (referred to as MCAC) was produced by microwave radiation assisted ZnCl2 activation using Malaysian coal (MC) as a precursor. The Brunauer–Emmett–Teller findings indicate that the MCAC has a relatively large surface area (798.18 m2/g) and a mesoporous structure (average pore diameter of 3.67 nm). The removal of Methylene Violet (MV 2B) a cationic dye model, was employed to investigate the adsorption properties of MCAC. A numerical desirability function in the Box–Behnken design (BBD) was employed to optimize the independent crucial adsorption variables as follows: A: MCAC dose (0.02–0.1 g); B: pH (4–10); and C: time (5–25 min). The results of equilibrium and dynamic adsorption showed that the adsorption of MV 2B followed Freundlich and pseudo-second order models, respectively. The maximum amount of MV 2B dye that the MCAC could adsorb (qmax) was 134.1 mg/g. Electrostatic interactions, π-π stacking, H-bonding, and pore diffusion contribute to the adsorption of MV 2B dye onto the MCAC surface. This study demonstrates the potential to utilize MC as a low-cost precursor for the efficient synthesis of MAC and its utility for the removal of pollutants

The study of removal chromium (VI) ions from aqueous solution by bimetallic ZnO/FeO nanocomposite with Siltstone: Isotherm, kinetics and reusability

In this study, nanocomposites of Baghanwala Siltstone (BSS) with ZnO (BSS/ZnO), FeO (BSS/FeO), and BSS/ZnO/FeO were successfully prepared for the removal of hexavalent chromium [(Cr (VI)] from aqueous solutions via a batch adsorption process. The characterization studies by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) found successful synthesis of the composites and demonstrated the occurrence of different active functional groups that played an active role in Cr ion adsorption. The effect of Cr initial concentrations (25–100 mg/L), adsorbent dose (0.5–2 g/L), pH (2–8), and contact time (0–160 min) on Cr remediation from contaminated water was examined. The order of Cr ion removal was BSS/ZnO/FeO (77–87%) \u3e BSS/ZnO (74–83%) \u3e BSS/FeO (71–77%) \u3e BSS (68–74%). The as-synthesized BSS/ZnO/FeO led to successful Cr removal (87%) at a 25 mg/L Cr concentration at pH 4.0. The Cr ion adsorption by the BSS/ZnO/FeO nanocomposite was well explained by the Langmuir adsorption isotherm model (R2 \u3e 0.99), while the kinetic experimental data was well fitted with the pseudo-second-order model (R2 \u3e 0.99). Among the as-synthesized adsorbents, the BSS/ZnO/FeO nanocomposite showed excellent stability and reusability in seven sorption cycles. The results showed that the as-synthesized BSS/ZnO/FeO nanocomposite had the greatest adsorption potential for removing Cr ions from contaminated water

Cloning, expression and purification of the α-carbonic anhydrase from the mantle of the Mediterranean mussel, Mytilus galloprovincialis

We cloned, expressed, purified, and determined the kinetic constants of the recombinant α-carbonic anhydrase (rec-MgaCA) identified in the mantle tissue of the bivalve Mediterranean mussel, Mytilus galloprovincialis. In metazoans, the α-CA family is largely represented and plays a pivotal role in the deposition of calcium carbonate biominerals. Our results demonstrated that rec-MgaCA was a monomer with an apparent molecular weight of about 32 kDa. Moreover, the determined kinetic parameters for the CO2 hydration reaction were kcat =  4.2 × 105 s−1 and kcat/Km of 3.5 × 107 M−1 ×s−1. Curiously, the rec-MgaCA showed a very similar kinetic and acetazolamide inhibition features when compared to those of the native enzyme (MgaCA), which has a molecular weight of 50 kDa. Analysing the SDS-PAGE, the protonography, and the kinetic analysis performed on the native and recombinant enzyme, we hypothesised that probably the native MgaCA is a multidomain protein with a single CA domain at the N-terminus of the protein. This hypothesis is corroborated by the existence in mollusks of multidomain proteins with a hydratase activity. Among these proteins, nacrein is an example of α-CA multidomain proteins characterised by a single CA domain at the N-terminus part of the entire protein