Reliable machine-to-machine multicast services with multi-radio cooperative retransmissions

The final publication is available at Springer via http://dx.doi.org/10.1007/s11036-015-0575-6The 3GPP is working towards the definition of service requirements and technical solutions to provide support for energy-efficient Machine Type Communications (MTC) in the forthcoming generations of cellular networks. One of the envisioned solutions consists in applying group management policies to clusters of devices in order to reduce control signaling and improve upon energy efficiency, e.g., multicast Over-The-Air (OTA) firmware updates. In this paper, a Multi-Radio Cooperative Retransmission Scheme is proposed to efficiently carry out multicast transmissions in MTC networks, reducing both control signaling and improving energy-efficiency. The proposal can be executed in networks composed by devices equipped with multiple radio interfaces which enable them to connect to both a cellular access network, e.g., LTE, and a short-range MTC area network, e.g., Low-Power Wi-Fi or ZigBee, as foreseen by the MTC architecture defined by ETSI. The main idea is to carry out retransmissions over the M2M area network upon error in the main cellular link. This yields a reduction in both the traffic load over the cellular link and the energy consumption of the devices. Computer-based simulations with ns-3 have been conducted to analyze the performance of the proposed scheme in terms of energy consumption and assess its superior performance compared to non-cooperative retransmission schemes, thus validating its suitability for energy-constrained MTC applications.Peer ReviewedPostprint (author's final draft

Delay and energy consumption analysis of frame slotted ALOHA variants for massive data collection in internet-of-things scenarios

This paper models and evaluates three FSA-based (Frame Slotted ALOHA) MAC (Medium Access Control) protocols, namely, FSA-ACK (FSA with ACKnowledgements), FSA-FBP (FSA with FeedBack Packets) and DFSA (Dynamic FSA). The protocols are modeled using an AMC (Absorbing Markov Chain), which allows to derive analytic expressions for the average packet delay, as well as the energy consumption of both the network coordinator and the end-devices. The results, based on computer simulations, show that the analytic model is accurate and outline the benefits of DFSA. In terms of delay, DFSA provides a reduction of 17% (FSA-FBP) and 32% (FSA-ACK), whereas in terms of energy consumption DFSA provides savings of 23% (FSA-FBP) and 28% (FSA-ACK) for the coordinator and savings of 50% (FSA-FBP) and 24% (FSA-ACK) for end-devices. Finally, the paper provides insights on how to configure each FSA variant depending on the network parameters, i.e., depending on the number of end-devices, to minimize delay and energy expenditure. This is specially interesting for massive data collection in IoT (Internet-of-Things) scenarios, which typically rely on FSA-based protocols and where the operation has to be optimized to support a large number of devices with stringent energy consumption requirementsPeer ReviewedPostprint (published version

Combining distributed queuing with energy harvesting to enable perpetual distributed data collection applications

This is the peer reviewed version of the following article: Vazquez-Gallego F, Tuset-Peiró P, Alonso L, Alonso-Zarate J. Combining distributed queuing with energy harvesting to enable perpetual distributed data collection applications. Trans Emerging Tel Tech. 2017;e3195 , which has been published in final form at https://doi.org/10.1002/ett.3195. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.This paper presents, models, and evaluates energy harvesting–aware distributed queuing (EH-DQ), a novel medium access control protocol that combines distributed queuing with energy harvesting (EH) to address data collection applications in industrial scenarios using long-range and low-power wireless communication technologies. We model the medium access control protocol operation using a Markov chain and evaluate its ability to successfully transmit data without depleting the energy stored at the end devices. In particular, we compare the performance and energy consumption of EH-DQ with that of time-division multiple access (TDMA), which provides an upper limit in data delivery, and EH-aware reservation dynamic frame slotted ALOHA, which is an improved variation of frame slotted ALOHA. To evaluate the performance of these protocols, we use 2 performance metrics: delivery ratio and time efficiency. Delivery ratio measures the ability to successfully transmit data without depleting the energy reserves, whereas time efficiency measures the amount of data that can be transmitted in a certain amount of time. Results show that EH-DQ and TDMA perform close to the optimum in data delivery and outperform EH-aware reservation dynamic frame slotted ALOHA in data delivery and time efficiency. Compared to TDMA, the time efficiency of EH-DQ is insensitive to the amount of harvested energy, making it more suitable for energy-constrained applications. Moreover, compared to TDMA, EH-DQ does not require updated network information to maintain a collision-free schedule, making it suitable for very dynamic networks.Peer ReviewedPostprint (author's final draft

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft