The use of new technology to improve genetic testing

Molecular confirmation of a clinical diagnosis of an inherited disease or of congenital malformations is of paramount importance for patients and their families. It is the conclusion of the differential diagnostic process, and provides information on the prognosis, in some cases on the therapeutic options, and on the recurrence risk. Currently, targeted sequencing of gene (s) of interest is the preferred approach for searching for small pathogenic mutations. The work presented in this thesis describes the application of new techniques for detecting small variations (mutations) in genomic DNA that underlie various disorders. These techniques include High Resolution Melting Curve Analysis (HR-MCA) followed by Sanger sequencing, targeted, X-exome and whole exome capture followed by Next Generation Sequencing (NGS). We have optimized, tested and applied the different new molecular techniques mentioned above to 1) faci litate the detection of disease causing mutations in several disorders with suspected Mendelian inheritance, 2) to speed up the identification of disease genes, 3) to provide a systematic tool for classifying previously intractable genetic diseasesUBL - phd migration 201

Ni incorporation in MgFe2O4 for improved CO splitting activity during solar fuel production

Efficacy of the sol–gel derived Ni-doped Mg-ferrites for an enhanced CO2 splitting activity is investigated. The results allied with the characterization indicate the formation of nominally phase pure Ni-doped Mg-ferrites with a coarser particle morphology. Ni-doped Mg-ferrites are further tested for multiple thermal reduction as well as CO2 splitting steps by using a thermogravimetric analyzer. The results associated with the thermogravimetric analysis confirmed that most of the Ni-doped Mg-ferrites attained a steady TR aptitude after crossing the 5th or 6th cycle. Likewise, the CS capability of all the Ni-doped Mg-ferrites accomplished consistency after 4th cycle (except for Ni0.11Mg0.88Fe2.01O4.005). The Ni0.90Mg0.11Fe2.04O4.070 showed the highest amount of O2 release (117.1 μmol/g cycle) and CO production (210.3 μmol/g cycle) in ten consecutive thermochemical cycles. Besides, Ni0.29Mg0.72Fe1.98O3.980 indicated better re-oxidation aptitude (nCO/nO2 ratio = 1.89) when compared with other Ni-doped Mg-ferrites

Treatment of waste gas contaminated with dichloromethane using photocatalytic oxidation, biodegradation and their combinations

[Abstract] The treatment of waste gas (WG) containing dichloromethane (DCM) using advanced oxidation processes (AOPs) [UV and UV-TiO2], biological treatment (BT), and their combination (AOPs-BT) was tested. AOP tests were performed in an annular photo-reactor (APHR), while BT was conducted in a continuous stirred tank bioreactor (CSTBR). The effects of gas flow rate (Qgas), inlet DCM concentration ([DCM]i), residence time (τ), photocatalyst loading (PH-CL) and % relative humidity (% RH) on the AOPs performance and the removal of DCM (%DCMr) were studied and optimized. The UV process exhibited %DCMr ≤ 12.5 % for tests conducted at a [DCM]i ≤ 0.45 g/m3, Qgas of 0.12 m3/h and τ of 27.6 s, respectively, and < 4 % when the [DCM]i ≥ 4.2 g/m3. The UV-TiO2 achieved a %DCMr ≥ 71 ± 1.5 % at Qgas of 0.06 m3/h, [DCM]i of 0.45 g/m3, τ of 55.2 s, PH-CL of 10 g/m2, and %RH of 50, respectively. The BT process removed ∼97.6 % of DCM with an elimination capacity (EC) of 234.0 g/m3·h. Besides, the high %DCMr of ∼98.5 % in the UV-BT and 99.7 % in the UV-TiO2-BT processes confirms AOPs-BT as a promising technology for the treatment of recalcitrant compounds present in WG.Xunta de Galicia; ED431C 2017/6

Application of Li-, Mg-, Ba-, Sr-, Ca-, and Sn-doped ceria for solar-driven thermochemical conversion of carbon dioxide

The redox reactivity of the Li-, Mg-, Ca-, Sr-, Ba-, and Sn-doped ceria (Ce0.9A0.1O2−δ) toward thermochemical CO2 splitting is investigated. Proposed Ce0.9A0.1O2−δ materials are prepared via co-precipitation of the hydroxide technique. The composition, morphology, and the average particle size of the Ce0.9A0.1O2−δ materials are determined by using suitable characterization methods. By utilizing a thermogravimetric analyzer setup, the long-term redox performance of each Ce0.9A0.1O2−δ material is estimated. The results obtained indicate that all the Ce0.9A0.1O2−δ materials are able to produce steady amounts of O2 and CO from cycle 4 to cycle 10. Based on the average nO2 released and nCO produced, the Ce0.899Sn0.102O2.002 and Ce0.895Ca0.099O1.889 are observed to be the top and bottom-most choices. When compared with the CeO2 material, all Ce0.9A0.1O2−δ materials showed elevated levels of O2 release and CO production

The effect of intermediate ozonation process on improving biogas production from co-digestion of agricultural waste and manure

Anaerobic co-digestion of agricultural solid waste, wastewater, and manure was evaluated in batch reactor. The performance of anaerobic digestion (AD) was monitored by assessing the methane production potential, maximum methane production rate and methane production lag time. An intermediate advanced oxidation processes by ozone was used to increase in the amount of methane produced and reduce the AD time. The production of methane from pure substrate (cow manure and wheat straw) was found to be 325 and 130 L/kg VS, mixed substrate of wheat straw, cattle manure and wastewater generated more than 368 L/kg VS. An intermediate ozonation process between two AD processes increased the % methane recovery form the ultimate value 60-85%, and reduce the total AD time to 20 days.Scopu

Impact of CO2 concentration and ambient conditions on microalgal growth and nutrient removal from wastewater by a photobioreactor

The increase in atmospheric CO2 concentration and the release of nutrients from wastewater treatment plants (WWTPs) are environmental issues linked to several impacts on ecosystems. Numerous technologies have been employed to resolves these issues, nonetheless, the cost and sustainability are still a concern. Recently, the use of microalgae appears as a cost-effective and sustainable solution because they can effectively uptake CO2 and nutrients resulting in biomass production that can be processed into valuable products. In this study single (Spirulina platensis (SP.PL) and mixed indigenous microalgae (MIMA) strains were employed, over a 20-month period, for simultaneous removal of CO2 from flue gases and nutrient from wastewater under ambient conditions of solar irradiation and temperature. The study was performed at a pilot scale photo-bioreactor and the effect of feed CO2 gas concentration in the range (2.5–20%) on microalgae growth and biomass production, carbon dioxide bio-fixation rate, and the removal of nutrients and organic matters from wastewater was assessed. The MIMA culture performed significantly better than the monoculture, especially with respect to growth and CO2 bio-fixation, during the mild season; against this, the performance was comparable during the hot season. Optimum performance was observed at 10% CO2 feed gas concentration, though MIMA was more temperature and CO2 concentration sensitive. MIMA also provided greater removal of COD and nutrients (~83% and >99%) than SP.PL under all conditions studied. The high biomass productivities and carbon bio-fixation rates (0.796–0.950 gdw·L−1·d−1 and 0.542–1.075 gC·L−1·d−1 contribute to the economic sustainability of microalgae as CO2 removal process. Consideration of operational energy revealed that there is a significant energy benefit from cooling to sustain the highest productivities on the basis of operating energy alone, particularly if the indigenous culture is used

A cross-sectional study confirms temporary post-COVID-19 vaccine menstrual irregularity and the associated physiological changes among vaccinated women in Jordan

Background: COVID-19 vaccines continue to save people’s lives around the world; however, some vaccine adverse events have been a major concern which slowed down vaccination campaigns. Anecdotal evidence pointed to the vaccine effect on menstruation but evidence from the adverse event reporting systems and the biomedical literature was lacking. This study aimed to investigate the physiological changes in women during menstruation amid the COVID-19 vaccination. Methods: A cross-sectional online survey was distributed to COVID-19 vaccinated women from Nov 2021 to Jan 2022. The results were analyzed using the SPSS software. Results: Among the 564 vaccinated women, 52% experienced significant menstrual irregularities post-vaccination compared to before regardless of the vaccine type. The kind of menstrual irregularity varied among the vaccinated women, for example, 33% had earlier menstruation, while 35% reported delayed menstruation. About 31% experienced heavier menstruation, whereas 24% had lighter menstrual flow. About 29% had menstruation last longer, but 13% had it shorter than usual. Noteworthy, the menstrual irregularities were more frequent after the second vaccine shot, and they disappeared within 3 months on average. Interestingly, 24% of the vaccinated women reported these irregularities to their gynecologist. Conclusion: The COVID-19 vaccine may cause physiological disturbances during menstruation. Luckily, these irregularities were short-termed and should not be a reason for vaccine hesitancy in women. Further studies are encouraged to unravel the COVID-19 vaccine adverse effect on women’s health

Potential for green algae spirulina to capture carbon dioxide from gas stream

This study evaluated the use of green algae Spirulina microalgae as a C02 capturing technology at different temperatures. The growth of Spirulina at 25 and 30◦C were studied in synthetic wastewater and its performance in removing nutrient were determined. Significant differences between the growth patterns of Spirulina were observed at different C02 dosage rate and different operational temperature. Spirulina showed the highest growth at 30 C and with a C02 injection dosage of 10%. Limited growth was observed for the systems injected with 5 and 15 % of C02 with respect to blank solution. Ammonia and phosphorus removals for Spirulina were 69%, 75%, and 83%, and 20%, 45% and 75 % for the media injected with 0, 5 and 10% C02. The results of this study show that simple and cost-effective microalgae-based wastewater treatment systems can be successfully employed at different temperatures as a successful C02 capturing technology even with the small probability of inhibition at high temperatures.Scopu

Recent developments and advancements in graphene-based technologies for oil spill cleanup and oil-water separation processes

The vast demand for petroleum industry products led to the increased production of oily wastewaters and has led to many possible separation technologies. In addition to production-related oily wastewater, direct oil spills are associated with detrimental effects on the local ecosystems. Accordingly, this review paper aims to tackle the oil spill cleanup issue as well as water separation by providing a wide range of graphene-based technologies. These include graphene-based membranes; graphene sponges; graphene-decorated meshes; graphene hydrogels; graphene aerogels; graphene foam; and graphene-coated cotton. Sponges and aerogels modified by graphene and reduced graphene oxide demonstrated effective oil water separation owing to their superhydrophobic/superoleophilic properties. In addition, oil particles are intercepted while allowing water molecules to penetrate the graphene-oxide-coated metal meshes and membranes thanks to their superhydrophilic/underwater superoleophobic properties. Finally, we offer future perspectives on oil water separation that are hindering the advancements of such technologies and their large-scale applications.Scopu