Corrosion Protection Study of Carbon Steel and 316 Stainless Steel Alloys Coated by Nanoparticles

The Corrosion protection effectiveness of Alimina(Al2O3,50nm)and Zinc oxide (ZnO,30nm) nanoparticales were studied on carbon steel and 316 stainless steel alloys in saline water (3.5%NaCl)at four temperatures: (20,30,40,50 OC)using three electrodes potentiostat. An average corrosion protection efficiencies of 65 %and 80% was achieved using Al2O3 NP's on carbon steel and stainless steel samples respectively, and it seems that no effect of rising temperature on the performances of the coated layers. While ZnO NP'S showed protection efficiency around 65% for the two alloys and little effected by temperature rising on the performanes of the coated layers. The morphology of the coated spesiemses was examined by Atomic force microscope

SPECTRAL STUDIES AND ANTIMICROBIAL SCREENING FOR SOME NOVEL CHALCONES ANALOGUES

Objective: The present work aim to study the spectral and antimicrobial activity for synthesized chalcones Methods: The synthesized Chalcones were characterized by Physical and spectral methods such as melting point, IR, 1H-NMR and Mass analysis. The synthesized compounds have been screened for their antimicrobial activity. Results: The biological data showed that compounds III, VII had strong activities against the Staphylococcus aureus, Bacillus subtilis, and Pseudomonas aeruginosa, but not activity against fungus. Conclusion: The main purpose to use an easy and useful method to synthesize biologically active chalcone

Effect of Foliar Application of Nano-selenium on the Anatomical Characteristics of Date Palm Phoenix dactylifera L. Barhi Cultivar under Salt Stress

This study investigated the effect of salinity on the anatomical features of date palm (Phoenix dactylifera L.) and the potential roles of nano selenium (Se NPs) in alleviating the adverse effects of salinity. Two concentrations (80 and 160 mg.L-1) of SeNPs were applied as a foliar spray on date palms irrigated with different concentrations of saline water (2.5 [control], 5, 10 and 20 ds.m-1). Results showed that 5 ds.m-1 salinity had no significant effect on the anatomical structure of date palm, whether applied alone or in combination with foliar spray of Se NPs. However, the vascular bundle dimensions and thickness of the xylem, phloem and mesophyll were significantly higher in plants exposed to 10 ds.m-1 salinity compared with the control plants. In particular, foliar spray of SeNPs at 80 mg.L-1 concentration enhanced the effect on these plants. By contrast, 20 ds.m-1 salinity significantly reduced all studied parameters except for the thickness of the upper and lower cuticle, which increased. Se NPs at 80 mg.L-1 concentration had a significant effect in alleviating the adverse effects of salinity at high levels. The results of this study proved that SeNPs at 80 mg.L-1 concentration were more effective in alleviating the adverse effects of salinity on the anatomical structure of date palm leaves than 160 mg.L-1 concentration

Effect of Foliar Application of Nano-selenium on the Anatomical Characteristics of Date Palm Phoenix dactylifera L. Barhi Cultivar under Salt Stress

This study investigated the effect of salinity on the anatomical features of date palm (Phoenix dactylifera L.) and the potential roles of nano selenium (Se NPs) in alleviating the adverse effects of salinity. Two concentrations (80 and 160 mg.L-1) of SeNPs were applied as a foliar spray on date palms irrigated with different concentrations of saline water (2.5 [control], 5, 10 and 20 ds.m-1). Results showed that 5 ds.m-1 salinity had no significant effect on the anatomical structure of date palm, whether applied alone or in combination with foliar spray of Se NPs. However, the vascular bundle dimensions and thickness of the xylem, phloem and mesophyll were significantly higher in plants exposed to 10 ds.m-1 salinity compared with the control plants. In particular, foliar spray of SeNPs at 80 mg.L-1 concentration enhanced the effect on these plants. By contrast, 20 ds.m-1 salinity significantly reduced all studied parameters except for the thickness of the upper and lower cuticle, which increased. Se NPs at 80 mg.L-1 concentration had a significant effect in alleviating the adverse effects of salinity at high levels. The results of this study proved that SeNPs at 80 mg.L-1 concentration were more effective in alleviating the adverse effects of salinity on the anatomical structure of date palm leaves than 160 mg.L-1 concentration

Lacking the floor of the mouth: a case study on Coptodon zillii (Cichlidae) from Shatt Al-Arab River, Basrah, Iraq

A single case of double mouth monstrosity was observed and examined in the cichlid fish Coptodon zillii collected from Shatt Al-Arab River, Basrah, Iraq on 15 May 2018. Instead, add the followings,"The floor of the mouth was ruptured, creating an extra mouth opening beneath the normal mouth. An injury may have caused this condition. Morphological examination indicates that the fish had lived with the abnormality for some time

Immunohistochemical study of bone marrow angiogenesis using CD34 in adult acute lymphoblastic leukemia and its correlation with various pathological, laboratory and clinical parameters

Background: In recent years, bone marrow angiogenesis is indicated to be involved in the pathogenesis and progression of certain hematological malignancies like acute leukemia, lymphomas, and multiple myeloma. Recent studies have suggested that bone marrow angiogenesis plays an important role in the pathogenesis of adult acute lymphoblastic leukemia and also has prognostic value in the disease. Objectives: at the present study, bone marrow angiogenesis in ALL will be examined using immunohistochemical staining for CD34, and this will be correlated with various pathological, laboratory and clinical parameters. Patients and methods: A retrospective cross-sectional study was done on 60 patients with acute lymphoblastic leukemia (32 males & 28 females) compared with 20 controls (anemic patients), all recruited at the Medical City Hospital/ Teaching Laboratories/ Baghdad from January 2010 to December 2012. The bone marrow biopsy of each was re-examined histologically. BM angiogenesis was studied by immunohistochemical staining for CD34 to identify microvessels. Results: The bone marrow microvessel density was markedly and significantly increased in patients with acute lymphoblastic leukemia compared with bone marrow controls (p = 0.0001). There was a significant association between angiogenesis grade III and WBC count more than 30×109/L (P > 0.0001). Conclusions: Angiogenesis in ALL was significantly higher than control group. Increase angiogenesis confirmed by IHC was significantly correlated with high WBC at diagnosis. These observations suggest that the combination of anti antiangiogenic therapy might apply to leukemia

Design of Frequency Reconfigurable Multiband Compact Antenna using two PIN diodes for WLAN/WiMAX Applications

YesIn this paper, we present a simple reconfigurable multiband antenna with two PIN diode switches for WiMAX/WLAN applications. The antenna permits reconfigurable switching in up to ten frequency bands between 2.2 GHz and 6 GHz, with relative impedance bandwidths of around 2.5% and 8%. The proposed antenna has been simulated using CST microwave studio software and fabricated on an FR-4 substrate. It is compact, with an area of 50 × 45 mm2, and has a slotted ground substrate. Both measured and simulated return loss characteristics of the optimized antenna show that it satisfies the requirement of 2.4/5.8 GHz WLAN and 3.5 GHz WiMAX antenna applications. Moreover, there is good agreement between the measured and simulated result in terms of radiation pattern and gain.Engineering and Physical Science Research Council through Grant EP/E022936A

The Design of a Uniplanar Printed Triple Band-Rejected UWB Antenna using Particle Swarm Optimization and the Firefly Algorithm

YesA compact planar monopole antenna is proposed for ultra-wideband applications. The antenna has a microstrip line feed and band-rejected characteristics and consists of a ring patch and partial ground plane with a defective ground structure of rectangular shape. An annular strip is etched above the radiating element and two slots, one C-shaped and one arc-shaped, are embedded in the radiating patch. The proposed antenna has been optimized using bio-inspired algorithms, namely Particle Swarm Optimization and the Firefly Algorithm, based on a new software algorithm (Antenna Optimizer). Multi-objective optimization achieves rejection bands at 3.3 to 3.7 GHz for WiMAX, 5.15 to 5.825 GHz for the 802.11a WLAN system or HIPERLAN/2, and 7.25 to 7.745 GHz for C-band satellite communication systems. Validated results show wideband performance from 2.7 to 10.6 GHz with S11 ˂ -10 dB. The antenna has compact dimensions of 28 × 30 mm2. The radiation pattern is comparatively stable across the operating band with a relatively stable gain except in the notched bands.This work was supported in part by the United Kingdom Engineering and Physical Science Research Council (EPSRC) under Grant EP/E022936A, TSB UK under grant application KTP008734 and the Iraqi Ministry of Higher Education and Scientific Research

Cyber-Security Incidents: A Review Cases In Cyber-Physical Systems

Cyber-Physical Systems refer to systems that have an interaction between computers, communication channels and physical devices to solve a real-world problem. Towards industry 4.0 revolution, Cyber-Physical Systems currently become one of the main targets of hackers and any damage to them lead to high losses to a nation. According to valid resources, several cases reported involved security breaches on Cyber-Physical Systems. Understanding fundamental and theoretical concept of security in the digital world was discussed worldwide. Yet, security cases in regard to the cyber-physical system are still remaining less explored. In addition, limited tools were introduced to overcome security problems in Cyber-Physical System. To improve understanding and introduce a lot more security solutions for the cyber-physical system, the study on this matter is highly on demand. In this paper, we investigate the current threats on Cyber-Physical Systems and propose a classification and matrix for these threats, and conduct a simple statistical analysis of the collected data using a quantitative approach. We confirmed four components i.e., (the type of attack, impact, intention and incident categories) main contributor to threat taxonomy of Cyber-Physical System

Comparative analysis of gradient-boosting ensembles for estimation of compressive strength of quaternary blend concrete

Concrete compressive strength is usually determined 28 days after casting via crushing of samples. However, the design strength may not be achieved after this time-consuming and tedious process. While the use of machine learning (ML) and other computational intelligence methods have become increasingly common in recent years, findings from pertinent literatures show that the gradient-boosting ensemble models mostly outperform comparative methods while also allowing interpretable model. Contrary to comparison with other model types that has dominated existing studies, this study centres on a comprehensive comparative analysis of the performance of four widely used gradient-boosting ensemble implementations [namely, gradient-boosting regressor, light gradient-boosting model (LightGBM), extreme gradient boosting (XGBoost), and CatBoost] for estimation of the compressive strength of quaternary blend concrete. Given components of cement, Blast Furnace Slag (GGBS), Fly Ash, water, superplasticizer, coarse aggregate, and fine aggregate in addition to the age of each concrete mixture as input features, the performance of each model based on R2, RMSE, MAPE and MAE across varying training–test ratios generally show a decreasing trend in model performance as test partition increases. Overall, the test results showed that CatBoost outperformed the other models with R2, RMSE, MAE and MAPE values of 0.9838, 2.0709, 1.5966 and 0.0629, respectively, with further statistical analysis showing the significance of these results. Although the age of each concrete mixture was found to be the most important input feature for all four boosting models, sensitivity analysis of each model shows that the compressive strength of the mixtures does increase significantly after 100 days. Finally, a comparison of the performance with results from different ML-based methods in pertinent literature further shows the superiority of CatBoost over reported the methods