Vortices in the SU(2)-Higgs model -- Vortices and the covariant adjoint Laplacian

Vortices in the SU(2)--Higgs model: The presence of a fundamental Higgs in the SU(N)-Higgs model yields color screening at some finite distance. Whereas the transition to the Higgs "phase" is accompanied by a suppression of projected center vortices, there is nearly no influence of color screening on the vortex properties in the confined "phase". Hence the behavior of the Wilson loop can be described in both phases within the vortex picture of confinement. Vortices and the covariant adjoint Laplacian: Laplacian center gauge is a method to localize center vortices in SU(N) gauge theory. We show that the eigenvectors of the covariant adjoint Laplacian identify vortices for a special class of gauge field configurations. However, for Monte Carlo generated configurations, modified approaches are required.Comment: 3 pages, 4 figures; Lattice2001(confinement

A Proton Computed Tomography Demonstrator for Stopping Power Measurements

Particle therapy is an established method to treat deep-seated tumours using accelerator-produced ion beams. For treatment planning, the precise knowledge of the relative stopping power (RSP) within the patient is vital. Conversion errors from x-ray computed tomography (CT) measurements to RSP introduce uncertainties in the applied dose distribution. Using a proton computed tomography (pCT) system to measure the SP directly could potentially increase the accuracy of treatment planning. A pCT demonstrator, consisting of double-sided silicon strip detectors (DSSD) as tracker and plastic scintillator slabs coupled to silicon photomultipliers (SiPM) as a range telescope, was developed. After a significant hardware upgrade of the range telescope, a 3D tomogram of an aluminium stair phantom was recorded at the MedAustron facility in Wiener Neustadt, Austria. In total, 80 projections with 6.5x10^5 primary events were acquired and used for the reconstruction of the RSP distribution in the phantom. After applying a straight-line approximation for the particle path inside the phantom, the most probable value (MPV) of the RSP distribution could be measured with an accuracy of 0.59%. The RSP resolution inside the phantom was only 9.3% due to a limited amount of projections and measured events per projection.Comment: Preprint submitted to the open-access Journal of Physics: Conference Series. (TIPP2021 conference proceedings). IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from i

Feasibility study of a proton CT system based on 4D-tracking and residual energy determination via time-of-flight

For dose calculations in ion beam therapy, it is vital to accurately determine the relative stopping power (RSP) distribution within the treated volume. Currently, RSP values are extrapolated from Hounsfield units (HU), measured with x-ray computed tomography (CT), which entails RSP inaccuracies due to conversion errors. A suitable method to improve the treatment plan accuracy is proton computed tomography (pCT). A typical pCT system consists of a tracking system and a separate residual energy (or range) detector to measure the RSP distribution directly. This paper introduces a novel pCT system based on a single detector technology, namely low gain avalanche detectors (LGADs). LGADs are fast 4D-tracking detectors, which can be used to simultaneously measure the particle position and time with precise timing and spatial resolution. In contrast to standard pCT systems, the residual energy is determined via a time-of-flight (TOF) measurement between different 4D-tracking stations. The design parameters for a realistic proton computed tomography system based on 4D-tracking detectors were studied and optimized using Monte Carlo simulations. The RSP accuracy and RSP resolution were measured inside the inserts of the CTP404 phantom to estimate the performance of the pCT system. After introducing a dedicated calibration procedure for the TOF calorimeter, RSP accuracies < 0.6 % could be achieved. Furthermore, the design parameters with the strongest impact on the RSP resolution were identified and a strategy to improve RSP resolution is proposed.Comment: Preprint submitted to Physics in Medicine and Biology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from i

High Resolution He-like Argon And Sulfur Spectra From The PSI ECRIT

We present new results on the X-ray spectroscopy of multicharged argon, sulfur and chlorine obtained with the Electron Cyclotron Resonance Ion Trap (ECRIT) in operation at the Paul Scherrer Institut (Villigen, Switzerland). We used a Johann-type Bragg spectrometer with a spherically-bent crystal, with an energy resolution of about 0.4 eV. The ECRIT itself is of a hybrid type, with a superconducting split coil magnet, special iron inserts which provides the mirror field, and a permanent magnetic hexapole. The high frequency was provided by a 6.4 GHz microwave emitter. We obtained high intensity X-ray spectra of multicharged F-like to He-like argon, sulfur and chlorine with one 1s hole. In particular, we observed the 1s2s^{3}S_1 \to 1s^2^{1}S_0 M1 and 1s2p^{3}P_2 \to 1s^2^{1}S_0 M2 transitions in He-like argon, sulfur and chlorine with unprecedented statistics and resolution. The energies of the observed lines are being determined with good accuracy using the He-like M1 line as a reference

First experimental time-of-flight-based proton radiography using low gain avalanche diodes

Ion computed tomography (iCT) is an imaging modality for the direct determination of the relative stopping power (RSP) distribution within a patient's body. Usually, this is done by estimating the path and energy loss of ions traversing the scanned volume via a tracking system and a separate residual energy detector. This study, on the other hand, introduces the first experimental study of a novel iCT approach based on time-of-flight (TOF) measurements, the so-called Sandwich TOF-iCT concept, which in contrast to any other iCT system, does not require a residual energy detector for the RSP determination. A small TOF-iCT demonstrator was built based on low gain avalanche diodes (LGAD), which are 4D-tracking detectors that allow to simultaneously measure the particle position and time-of-arrival with a precision better than 100um and 100ps, respectively. Using this demonstrator, the material and energy-dependent TOF was measured for several homogeneous PMMA slabs in order to calibrate the acquired TOF against the corresponding water equivalent thickness (WET). With this calibration, two proton radiographs (pRad) of a small aluminium stair phantom were recorded at MedAustron using 83 and 100.4MeV protons. Due to the simplified WET calibration models used in this very first experimental study of this novel approach, the difference between the measured and theoretical WET ranged between 37.09 and 51.12%. Nevertheless, the first TOF-based pRad was successfully recorded showing that LGADs are suitable detector candidates for TOF-iCT. While the system parameters and WET estimation algorithms require further optimization, this work was an important first step to realize Sandwich TOF-iCT. Due to its compact and cost-efficient design, Sandwich TOF-iCT has the potential to make iCT more feasible and attractive for clinical application, which, eventually, could enhance the treatment planning quality

High-precision x-ray spectroscopy in few-electron ions

International audienceThe experimental and spectrum analysis procedures that led to about 15 new, high-precision, relative x-ray line energy measurements are presented. The measured lines may be used as x-ray reference lines in the 2.4-3.1 keV range. Applications also include tests of the atomic theory, and in particular of quantum electrodynamics and of relativistic many-body theory calculations. The lines originate from 2- to 4-electron ions of sulfur (Z=16), chlorine (Z=17) and argon (Z=18). The precision reached for their energy ranges from a few parts per million (ppm) to about 50 ppm. This places the new measurements among the most precise performed in mid-Z highly charged ions (Z is the nuclear charge number). The elements of the experimental setup are described: the ion source (an electron cyclotron resonance ion trap), the spectrometer (a single, spherically bent crystal spectrometer), as well as the spectrum acquisition camera (low-noise, high-efficiency CCD). The spectrum analysis procedure, which is based on a full simulation of the spectrometer response function, is also presented

Line shape of the μH(3p - 1s) transition

International audienceThe line shape of the (3p − 1s) X-ray transition in muonic hydrogen was measured for the first time with a high-resolution crystal spectrometer. The assumption of a statistical population of the hyperfine levels was directly confirmed by experiment, and a measured value for the hyperfine splitting is reported. An X-ray line broadening due to Doppler effect could be clearly identified and attributed to different Coulomb de-excitation transitions which precede the measured radiative transition. The results allow a decisive test of advanced cascade model calculations and establish an alternative and “model free” method to extract the strong-interaction parameters from pionic hydrogen data

Pionic Hydrogen

International audienc