Moving from evaluation to trial: how do SMEs start adopting cloud ERP?

The advent of cloud technology involving low subscription overheads cost has provided small and medium-sized enterprises (SMEs) with the opportunity to adopt new cloud-based corporate-wide systems (i.e., cloud ERP). This technology, operating through subscriptionbased services, has now provided SMEs with a complete range of IT applications that were once restricted to large organisations. As anecdotal evidences suggest, SMEs are increasingly adopting cloud-based ERP software. The selection of an ERP is a complex process involving multiple stages and stakeholders, suggesting the importance of closer examination of cloud ERP adoption in SMEs. Yet, prior studies have predominantly treated technology adoption as a single activity and largely ignored the issue of ERP adoption in SMEs. Understanding of the process nature of the adoption and the factors that are important in each stage of the adoption potentially may result in guiding SMEs to make well-informed decisions throughout the ERP selection process. Thus, our study proposes that the adoption of cloud ERP should be examined as a multi-stage process. Using the theory of planned behaviour (TPB) and Ettlie’s adoption stages, as well as employing data gathered from 162 owners of SMEs, our findings show that the factors that influence the intention to adopt cloud ERP vary significantly across adoptive stages

Data mining of the essential causes of different types of fatal construction accidents

Accident analysis is used to discover the causes of workplace injuries and devise methods for preventing them in the future. There has been little discussion in the previous studies of the specific elements contributing to deadly construction accidents. In contrast to previous studies, this study focuses on the causes of fatal construction accidents based on management factors, unsafe site conditions, and workers' unsafe actions. The association rule mining technique identifies the hidden patterns or knowledge between the root causes of fatal construction accidents, and one hundred meaningful association rules were extracted from the two hundred and fifty-three rules generated. It was discovered that many fatal construction accidents were caused by management factors, unsafe site circumstances, and risky worker behaviors. These analyses can be used to demonstrate plausible cause-and-effect correlations, assisting in building a safer working environment in the construction sector. The study findings can be used more efficiently to design effective inspection procedures and occupational safety initiatives. Finally, the proposed method should be tested in a broader range of construction situations and scenarios to ensure that it is as accurate as possible

Evaluation of the knowledge and practices of pregnant Yemeni Women regarding teratogens

Purpose: To investigate the knowledge and practice of pregnant women with regards to teratogens.Methods: A month-long cross-sectional study was carried out among 150 pregnant women selected from four Motherhood and Child Healthcare Centers (MCHCs) in Mukalla District of Yemen. Data collection was conducted during face-to-face interviews using a questionnaire. Descriptive and simple regression analyses were used.Results: Of the 150 pregnant women who participated in the study, 95.3 % of the pregnant women were < 36 years old, 7.4 % had children with congenital malformations, 62 % indicated that they had heard about folic acid; however, only 16.6 % knew the significance of folic acid. Regarding toxoplasmosis, 94.7 % indicated that they had heard about toxoplasmosis, and 76 % knew about the serious consequences of the disease (congenital malformation and abortion) during pregnancy. Based on simple regression analysis, the results indicate that education and parity, irrespective of age or income level, were the major factors determining better knowledge and practices in pregnancy with regards to toxoplasmosis.Conclusion: Knowledge of folic acid deficiency among pregnant women in Mukalla District of Yemen is relatively low. Furthermore, preventive practices to avoid folic acid deficiency are minimal.Keywords: Knowledge, Practices, Teratogens, Pregnant Yemeni women, Folic acid deficienc

Shear Strength of Copper Joints Prepared by Low Temperature Sintering of Silver Nanoparticles

In this work, mechanical properties of Cu-to-Cu joint samples prepared by low temperature sintering of Ag nanoparticle paste have been investigated. The silver nanopaste was prepared by a controlled thermal decomposition of an organometallic precursor. The as-synthesized Ag particles were spherical, with an average diameter of 8.5 nm. The Cu-to-Cu joint samples were made by placing a small amount of Ag nanopaste between two polished Cu plates and sintering at 150C, 200C, 220C and 350C in air. A normal load was applied to aid sintering. Mechanical properties were measured by imposing a uniform stress across the sample bond area and measuring the corresponding strain. The application of external load was found to have a positive effect on the material’s mechanical properties. Furthermore, interestingly high values of shear strength were observed.Byly zkoumány mechanické vlastnosti Cu-to-Cu spojů připravených nízkoteplotní sintrací pasty Ag nanočástic. Ag nanopasta byla připravena řízeným tepelným rozkladem organokovových prekurzorů. Syntetizované Ag NPs byly kulovité, o středním průměru 8,5 nm. Cu-to-Cu spoje byly vyrobeny umístěním malého množství Ag nanopasty mezi dvě leštěné Cu desky a sintrováním při 150C, 200C, 220C and 350C na vzduchu. Zatížení bylo použito na k podpoře sintrace. Mechanické vlastnosti byly měřeny stanovením napětí lomu a deformace. Bylo zjištěno, že aplikace vnějšího zatížení má pozitivní vliv na mechanické vlastnosti spoje

Assessing geochemical and natural radioactivity impacts of Hamadat phosphatic mine through radiological indices

The utilization of phosphorite deposits as an industrial resource is of paramount importance, and its sustainability largely depends on ensuring safe and responsible practices. This study aims to evaluate the suitability of phosphorite deposits for industrial applications such as the production of phosphoric acid and phosphatic fertilizers. To achieve this goal, the study meticulously examines the geochemical characteristics of the deposits, investigates the distribution of natural Radioactivity within them, and assesses the potential radiological risk associated with their use. The phosphorites are massive and collected from different beds within the Duwi Formation at the Hamadat mining area. They are grain-supported and composed of phosphatic pellets, bioclasts (bones), non-phosphatic minerals, and cement. Geochemically, phosphorites contain high concentrations of P2O5 (23.59-28.36 wt.%) and CaO (40.85-44.35 wt.%), with low amounts of Al2O3 (0.23-0.51 wt.%), TiO2 (0.01-0.03 wt.%), Fe2O3 (1.14-2.28 wt.%), Na2O (0.37-1.19 wt.%), K2O (0.03-0.12 wt.%), and MnO (0.08- 0.18 wt.%), suggesting the low contribution of the detrital material during their deposition. Moreover, they belong to contain enhanced U concentration (55-128 ppm). They are also enriched with Sr, Ba, Cr, V, and Zn and depleted in Th, Zr, and Rb, which strongly supports the low detrital input during the formation of the Hamadat phosphorites. The high Radioactivity of the studied phosphorites is probably due to the widespread occurrence of phosphatic components (e.g., apatite) that accommodate U in high concentrations. Gamma spectrometry based on NaI (Tl) crystal 3×3 has been used to measure occurring radionuclides in the phosphorite samples. The results indicate that the radioactive concentrations' average values of 226Ra, 232Th, and 40K are 184.18±9.19, 125.82±6.29, and 63.82±3.19 Bq Kg-1 , respectively. Additionally, evaluations have been made of the radiological hazards. The calculated risk indicators exceeded the recommended national and world averages. The data obtained will serve as a reference for follow-up studies to evaluate the effectiveness of the Radioactivity of phosphatic materials collected from the Hamdat mine area. © 2023 Fathy et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

Prediction of Coal Dilatancy Point Using Acoustic Emission Characteristics: Insight Experimental and Artificial Intelligence Approaches

This research offers a combination of experimental and artificial approaches to estimate the dilatancy point under different coal conditions and develop an early warning system. The effect of water content on dilatancy point was investigated under uniaxial loading in three distinct states of coal: dry, natural, and water-saturated. Results showed that the stiffness-stress curve of coal in different states was affected differently at various stages of the process. Crack closure stages and the propagation of unstable cracks were accelerated by water. However, the water slowed the elastic deformation and the propagation of stable cracks. The peak strength, dilatancy stress, elastic modulus, and peak stress of natural and water-saturated coal were less than those of dry. An index that determines the dilatancy point was derived from the absolute strain energy rate. It was discovered that the crack initiation point and dilatancy point decreased with the increase in acoustic emission (AE) count. AE counts were utilized in artificial neural networks, random forest, and k-nearest neighbor approaches for predicting the dilatancy point. A comparison of the evaluation index revealed that artificial neural networks prediction was superior to others. The findings of this study may be valuable for predicting early failures in rock engineering

Physico-mechanical properties and shielding efficiency in relation to mineralogical and geochemical compositions of Um Had granitoid, Central Eastern Desert, Egypt

The current work aims to describe the physico-mechanical characteristics and shielding efficiency with reference to the mineralogical and geochemical compositions of the Neoproterozoic Um Had composite granitoid pluton in order to deduce their favorability as dimension stones. The Um Had granitoid pluton has an elliptical outline with a mean diameter of about 10 km. This pluton is a composite (ranging from white to reddish pink color), hard, massive, and medium- to coarse-grained granitoid body. It is classified as syenogranite according to their modal and bulk chemical compositions. Geochemically, the granitoid pluton is a highly calc-alkaline, peraluminous granite, formed by low degree partial melting of tonalitic source rock in a post-collisional tectonic setting. The physico-mechanical properties of the granitoid pluton under study satisfy the requirements of dimension stone in terms of their bulk density (from 2561 to 2564 kg/m3), and to some extent water absorption capacity (from 0.38% to 0.55%). However, their compressive strength values (50.4–113.4 MPa) do not achieve the minimum requirement for interior use and light duty exterior use. This study delves into the potential of some of our syenogranite samples (I, IIA, IIS, and 10) as gamma radiation shielding materials. We have assessed the mass attenuation coefficient (GMAC), effective atomic number (Zeff), exposure build-up factor (EBF), and energy absorption build-up factor (EABF) for each of these samples. The GMAC and Zeff calculations were performed using the Phy-X online software, across a photon energy range of 0.015–15 MeV. Our findings suggest an inverse relationship between photon energy and GMAC, with the highest values observed for the (I) granite sample (∼18). This study shows the promising radiation shielding capacity of our samples. The insights derived from GMAC, Zeff, EBF, and EABF can serve as a guide for the development of effective, naturally sourced radiation shielding materials. Copyright © 2023 Rashwan, Lasheen, Abdelwahab, Azer, Zakaly, Alarifi, Ene and Thabet.King Saud University, KSUThis research was supported by the Researchers Supporting Project number (RSP2023R496), King Saud University, Riyadh, Saudi Arabia

Developments in Nanoparticles Enhanced Biofuels and Solar Energy in Malaysian Perspective: A Review of State of the Art

The rapid rise in global oil prices, the scarcity of petroleum sources, and environmental concerns have all created severe issues. As a result of the country's rapid expansion and financial affluence, Malaysia's energy consumption has skyrocketed. Biodiesel and solar power are currently two of the most popular alternatives to fossil fuels in Malaysia. These two types of renewable energy sources appear to be viable options because of their abundant availability together with environmental and performance competence to highly polluting and fast depleting fossil fuels. The purpose of adopting renewable technology is to expand the nation's accessibility to a reliable and secure power supply. The current review article investigates nonconventional energy sources added with nanosized metal particles called as nanomaterials including biodiesel and solar, as well as readily available renewable energy options. Concerning the nation's energy policy agenda, the sources of energy demand are also investigated. The article evaluates Malaysia's existing position in renewable energy industries, such as biodiesel and solar, as well as the impact of nanomaterials. This review article discusses biodiesel production, applications, and government policies in Malaysia, as well as biodiesel consumption and recent developments in the bioenergy sector, such as biodiesel property modifications utilizing nanoparticle additions. In addition, the current review study examines the scope of solar energy, different photovoltaic concentrators, types of solar energy harvesting systems, photovoltaic electricity potential in Malaysia, and the experimental setup of solar flat plate collectors (FPC) with nanotechnology

Home exposure to Arabian incense (bakhour) and asthma symptoms in children: a community survey in two regions in Oman

<p>Abstract</p> <p>Background</p> <p>Incense burning has been reported to adversely affect respiratory health. The aim of this study was to explore whether exposure to bakhour contributes to the prevalence of asthma and/or triggers its symptoms in Omani children by comparing two Omani regions with different prevalence of asthma.</p> <p>Methods</p> <p>A randomly selected sample of 10 years old schoolchildren were surveyed using an Arabic version of ISAAC Phase II questionnaires with the addition of questions concerning the use and effect of Arabian incense on asthma symptoms. Current asthma was defined as positive response to wheeze in the past 12 months or positive response to "ever had asthma" together with a positive response to exercise wheeze or night cough in the past 12 months. Simple and multivariable logistic regression analyses were performed to estimate the effect of bakhour exposure and other variables on current asthma diagnosis and parents' response to the question: "Does exposure to bakhour affect your child breathing?"</p> <p>Results</p> <p>Of the 2441 surveyed children, 15.4% had current asthma. Bakhour use more than twice a week was three times more likely to affect child breathing compared to no bakhour use (adjusted OR 3.01; 95% CI 2.23–4.08) and this effect was 2.55 times higher in asthmatics (adjusted OR 2.55; 95% CI 1.97–3.31) compared to non-asthmatics. In addition, bakhour caused worsening of wheeze in 38% of the asthmatics, making it the fourth most common trigger factor after dust (49.2%), weather (47.6%) and respiratory tract infections (42.2%). However, there was no significant association between bakhour use and the prevalence of current asthma (adjusted OR 0.87; 95% CI 0.63–1.20).</p> <p>Conclusion</p> <p>Arabian incense burning is a common trigger of wheezing among asthmatic children in Oman. However, it is not associated with the prevalence asthma.</p