El caolin y la arena silicea como materiales de construcción

El caolín es una arcilla, blanca procedente de la descomposición de rocas feldespáticas y puede venir mezclada con cuarzo, feldespato y minerales ferruginosos. El caolín que se trata en esta ponencia procede la compañía Caolina, ubicada en Arguisuelas - Cuenca (España). El objetivo es la explotación minera, lavado, concentración y comercialización de caolín y arena silícea, dado que los dos minerales aparecen conjuntamente en la explotación. Caolina explota a cielo abierto su recurso minero, para obtener un producto cuyas características sean aceptadas por grandes fabricantes de porcelana sanitaria y de esmaltes cerámicos. El valor añadido de los productos finales de Caolina se aporta en la planta de tratamiento, mediante procesos de molienda, lavado, cribado, hidrociclonado, filtrado, secado y extrusionado. El caolín es un mineral básico para la fabricación de la porcelana sanitaria y otros materiales cerámicos de construcción tales como baldosas, azulejos, tejas y sus correspondientes esmaltes. En Caolina el principal mercado es la porcelana sanitaria dadas las excelentes propiedades cerámicas del producto. El segundo mineral que se obtiene en Caolina, es un importante material de construcción, la arena silícea. Además de las aplicaciones en la industria de la cerámica, el vidrio y los abrasivos, la arena silícea es un constituyente de morteros y hormigones de alta resistencia a la abrasión. Caolina comercializa su arena silícea fundamentalmente para estos prefabricados de hormigón. Además, la arena silícea presenta muy buenas propiedades como material de construcción drenante y filtrante. El artículo describe detalladamente las aplicaciones del caolín de Caolina en los materiales cerámicos y de construcció

Variant pathogenic prediction by locus variability: the importance of the current picture of evolution.

Accurate detection of pathogenic single nucleotide variants (SNVs) is a key challenge in whole exome and whole genome sequencing studies. To date, several in silico tools have been developed to predict deleterious variants from this type of data. However, these tools have limited power to detect new pathogenic variants, especially in non-coding regions. In this study, we evaluate the use of a new metric, the Shannon Entropy of Locus Variability (SELV), calculated as the Shannon entropy of the variant frequencies reported in genome-wide population studies at a given locus, as a new predictor of potentially pathogenic variants in non-coding nuclear and mitochondrial DNA and also in coding regions with a selective pressure other than that imposed by the genetic code, e.g splice-sites. For benchmarking, SELV was compared to predictors of pathogenicity in different genomic contexts. In nuclear non-coding DNA, SELV outperformed CDTS (AUCSELV = 0.97 in ROC curve and PR-AUCSELV = 0.96 in Precision-recall curve). For non-coding mitochondrial variants (AUCSELV = 0.98 in ROC curve and PR-AUCSELV = 1.00 in Precision-recall curve) SELV outperformed HmtVar. Moreover, SELV was compared against two state-of-the-art ensemble predictors of pathogenicity in splice-sites, ada-score, and rf-score, matching their overall performance both in ROC (AUCSELV = 0.95) and Precision-recall curves (PR-AUC = 0.97), with the advantage that SELV can be easily calculated for every position in the genome, as opposite to ada-score and rf-score. Therefore, we suggest that the information about the observed genetic variability in a locus reported from large scale population studies could improve the prioritization of SNVs in splice-sites and in non-coding regions.FSC is supported by the Ministerio de Ciencia, Innovación, y Universidades (MCIU) [grant no. RTI2018-102084-B-I00]. JAE is supported by the MCIU (RTI2018-099357-BI00), Human Frontier Science Program (RGP0016/2018), CIBERFES16/10/00282 and RED2018-102576-T. The CNIC is supported by MCIU and the Pro-CNIC Foundation and is a Severo Ochoa Center of Excellence [MCIU award SEV-XXX].”S

Nanocomposite Bi/TiO2 multilayer thin flms deposited by a crossed beam laser ablation confguration

Articulo relacionado con la caracterizacion de materialesA crossed beam pulsed laser deposition confguration was used to prepare nanocomposites Bi/TiO2 thin flms on two different substrates. The multilayered system was formed by depositing TiO2 and Bi layers alternately. In order to embed the Bi nanostructures in TiO2, the subsequent TiO2 layers were synthesized using a constant number of laser pulses (3000) corresponding to a thickness of approximately 21 nm. The Bi nanostructures were deposited on the TiO2 layers alternately by irradiating the Bi target with 30, 100, 200, and 300 laser pulses. In this way, the Bi nanostructures were embedded inside the TiO2 matrix. A total of 8 samples with bismuth and one reference, with TiO2 only, were produced. Transmission Electron Microscopy (TEM) showed that nearly spherical nanoparticles (NPs) were obtained at lower number of pulses, whereas at 300 pulses a quasi-percolated nanostructured Bi flm was obtained. X-Ray Photoelectron Spectroscopy (XPS) revealed that the TiO2 layers were not afected due to the bismuth presence. Raman Spectroscopy showed vibrational features characteristic of the rutile phase for the titania layer. The Raman spectrum of the multilayer prepared using 300 laser pulses on the bismuth, suggests that the Bi layer is formed by a mixture of metallic Bi, and α-Bi2O3. The Ultraviolet–Visible Spectroscopy reveals that no substantial changes are presented in the transmittance spectra indicating similar optical properties of the diferent deposits. Finally, the photoluminescence emission spectra indicate that the substrate position in the deposition chamber afects the electronic structure of the material.A. Martínez-Chávez thanks CONACyT for the scholarship granted (No. 815785). K. Esquivel and L. Escobar thank the Engineering Faculty-UAQ for the fnancial support granted through the Attention to national problems fund and the FONDEC-UAQ-2021. We greatly appreciate the collaboration of R. Basurto in performing the XPS measurements

Abnormal Capillary Vasodynamics Contribute to Ictal Neurodegeneration in Epilepsy

Seizure-driven brain damage in epilepsy accumulates over time, especially in the hippocampus, which can lead to sclerosis, cognitive decline, and death. Excitotoxicity is the prevalent model to explain ictal neurodegeneration. Current labeling technologies cannot distinguish between excitotoxicity and hypoxia, however, because they share common molecular mechanisms. This leaves open the possibility that undetected ischemic hypoxia, due to ictal blood flow restriction, could contribute to neurodegeneration previously ascribed to excitotoxicity. We tested this possibility with Confocal Laser Endomicroscopy (CLE) and novel stereological analyses in several models of epileptic mice. We found a higher number and magnitude of NG2+ mural-cell mediated capillary constrictions in the hippocampus of epileptic mice than in that of normal mice, in addition to spatial coupling between capillary constrictions and oxidative stressed neurons and neurodegeneration. These results reveal a role for hypoxia driven by capillary blood flow restriction in ictal neurodegeneration

Thermoluminescent response of C-modified Al2O3 thin films deposited by parallel laser ablation plasmas

Aluminium oxide thin films modified with different amounts of carbon were prepared using a parallel laser ablation plasmas configuration. The effect of the amount of carbon incorporated in the films on their compositional, morphological, structural, and thermoluminescent properties was studied. The results showed that films with different C content, from 11 to 33 at. %, were obtained. The structural characterization revealed the growth of an amorphous material. Surface morphology of the obtained thin films showed smooth surfaces. The films were exposed to UV and gamma radiation (Co-60) in order to study their thermoluminescence response. The results tend to indicate that carbon incorporation into the alumina favours the increase of a high temperature TL peak.CONACyT CB 24099

Abnormal Capillary Vasodynamics Contribute to Ictal Neurodegeneration in Epilepsy

Seizure-driven brain damage in epilepsy accumulates over time, especially in the hippocampus, which can lead to sclerosis, cognitive decline, and death. Excitotoxicity is the prevalent model to explain ictal neurodegeneration. Current labeling technologies cannot distinguish between excitotoxicity and hypoxia, however, because they share common molecular mechanisms. This leaves open the possibility that undetected ischemic hypoxia, due to ictal blood flow restriction, could contribute to neurodegeneration previously ascribed to excitotoxicity. We tested this possibility with Confocal Laser Endomicroscopy (CLE) and novel stereological analyses in several models of epileptic mice. We found a higher number and magnitude of NG2+ mural-cell mediated capillary constrictions in the hippocampus of epileptic mice than in that of normal mice, in addition to spatial coupling between capillary constrictions and oxidative stressed neurons and neurodegeneration. These results reveal a role for hypoxia driven by capillary blood flow restriction in ictal neurodegeneration

Desafíos de las metrópolis: Efectos ambientales y sociales. Tendencias geográficas II

El libro está conformado de estudios realizados por profesores-investigadores de la Universidad Autónoma del Estado de México, de la Universidad de Varsovia, así como de la Universidad Pedagógica Comisión de Educación Nacional de Cracovia. En esta obra se exponen algunas investigaciones sobre los cambios en los factores sociales, naturales, económicos y ambientales como principales desafios que presentan las zonas de México, Polonia y de contextos de Sudamérica, tales como Sao Paulo, Quito y Bogotá y ciudades medias y pequeñas.Universidad Autónoma del Estado de Méxic

The impact of the COVID-19 pandemic on the mental health of healthcare workers:study protocol for the COVID-19 HEalth caRe wOrkErS (HEROES) study

BACKGROUND: Preliminary country-specific reports suggest that the COVID-19 pandemic has a negative impact on the mental health of the healthcare workforce. In this paper, we summarize the protocol of the COVID-19 HEalth caRe wOrkErS (HEROES) study, an ongoing, global initiative, aimed to describe and track longitudinal trajectories of mental health symptoms and disorders among health care workers at different phases of the pandemic across a wide range of countries in Latin America, Europe, Africa, Middle-East, and Asia. METHODS: Participants from various settings, including primary care clinics, hospitals, nursing homes, and mental health facilities, are being enrolled. In 26 countries, we are using a similar study design with harmonized measures to capture data on COVID-19 related exposures and variables of interest during two years of follow-up. Exposures include potential stressors related to working in healthcare during the COVID-19 pandemic, as well as sociodemographic and clinical factors. Primary outcomes of interest include mental health variables such as psychological distress, depressive symptoms, and posttraumatic stress disorders. Other domains of interest include potentially mediating or moderating influences such as workplace conditions, trust in the government, and the country’s income level. RESULTS: As of August 2021, ~ 34,000 health workers have been recruited. A general characterization of the recruited samples by sociodemographic and workplace variables is presented. Most participating countries have identified several health facilities where they can identify denominators and attain acceptable response rates. Of the 26 countries, 22 are collecting data and 2 plan to start shortly. CONCLUSIONS: This is one of the most extensive global studies on the mental health of healthcare workers during the COVID-19 pandemic, including a variety of countries with diverse economic realities and different levels of severity of pandemic and management. Moreover, unlike most previous studies, we included workers (clinical and non-clinical staff) in a wide range of settings. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s00127-021-02211-9