Solid acid catalysts comprising heteropoly acids supported on SiO2, TiO2 and ZrO2: A microcalorimetric investigation of catalyst acidity and new insight into the mechanism of alcohol dehydration over HPA

Keggin-type heteropoly acids (HPAs) have strong Brønsted acidity and are widely used as acid catalysts. The aim of this work is the systematic characterisation of the acid strength of HPA catalysts comprising H3PW12O40 and H4SiW12O40 supported on SiO2, TiO2 and ZrO2 with 10–100% HPA loading and testing their activity in dehydration of alcohols to gain new mechanistic insight regarding the role of bulk-type and surface-type HPA catalysis in this reaction. The HPA catalysts were prepared by impregnation from an aqueous solution and characterised using BET, XRD, TGA, DRIFTS and ICP–OES. The acid strength of HPA catalysts was determined by NH3 adsorption microcalorimetry and found to decrease in the order HPA/SiO2 > HPA/TiO2 > HPA/ZrO2. For each type of HPA catalyst, the acid strength increased with increasing HPA loading. This can be attributed to HPA-support interaction reducing the strength of HPA proton sites at low HPA loadings. The activity of HPA catalysts was tested in the gas-phase dehydration of MeOH and i-PrOH in a fixed-bed reactor. Evidence was obtained that alcohol dehydration over HPA catalysts in a steady-state flow system occurs via the surface-type rather than bulk-type catalysis as suggested hitherto. This follows from a strong correlation between the reaction rate and the number of surface proton sites in HPA catalysts

Parameters Synthesis of Na-Magadiite Materials for Water Treatment and Removal of Basic Blue-41: Properties and Single-Batch Design Adsorber

Na-magadiite materials were prepared from a gel containing a silica source, sodium hydroxide, and water via hydrothermal treatment at different temperatures (130 °C to 170 °C) and periods of time (1 day to 10 days). In this study, four silica sources were selected (fumed silica, colloidal silica, Ludox HS-40%, and Ludox AS-40%). Variable conditions such as sodium hydroxide and water contents were explored at a specific temperature and reaction time. The obtained materials were characterized by using X-ray diffraction (XRD), thermogravimetry differential thermal analysis TG-DTA, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier Transform Infrared spectroscopy (FTIR), solid 29Si magic angle spinning magnetic nuclear resonance (MAS MNR, and nitrogen adsorption isotherms. A pure Na-magadiite phase was obtained from the four silica sources at a synthesis temperature of 150 °C after a period of one to two days with a characteristic basal spacing of 1.54 nm. At a longer reaction time of 3 days and a higher temperature of 170 °C, Na-kenyaite with a basal spacing of 2.01 nm was achieved, in addition to a quartz phase. The content of water or sodium hydroxide in the gel affected the nature of the prepared phases. A cauliflower-like morphology was obtained from colloidal silica sources, while a different morphology was achieved using solid fumed silica. The 29Si solid NMR confirmed the presence of Q3 and Q4 silicon sites in the Na-magadiite materials. The optimal Na-magadiite materials at 150 °C for 2 days were assessed for their ability to remove Basic Blue-41 dye from artificially contaminated aqueous solution. The Langmuir equation was used to estimate the maximum removal capacity. A maximum removal capacity of 219 mg/g was achieved using Na-magadiite prepared from a Ludox-HS40% silica source, and a maximum removal capacity of 167 mg/g was observed for Na-magadiite prepared from fumed silica. Basic Blue-4’s removal percentage was enhanced at basic pH levels (8 to 10) to a maximum of 95%. These materials could be regenerated for seven cycles of reuse with a reduction of 27 to 40% of the original values. Therefore, Na-magadiite materials are promising and efficient removal agents for the removal of Basic Blue-41 from effluents

Application of Organo-Magadiites for the Removal of Eosin Dye from Aqueous Solutions: Thermal Treatment and Regeneration

Na-magadiite exchanged with cetyl-trimethylammonium cations provided organophilic silicate materials that allowed for the effective removal of the acidic dye “eosin”. The organic cations were intercalated into the interlayer spacing of the layered silicate via an exchange reaction between the organic cations from their bromide salt and the solid Na-magadiite at room temperature. Different techniques were used to characterize the effect of the initial concentration of the surfactant on the structure of the organo-magadiites. The C, H, and N analysis indicated that a maximum of organic cations of 0.97 mmol/g was achieved and was accompanied by an expansion of the basal spacing of 3.08 nm, with a tilted angle of 59° to the silicate layers. The conformation of the organic surfactants was probed using solid-state 13C, finding mainly the trans conformation similar to that of the starting cetyl trimethylammonium bromide salt (C16TMABr). Thermal gravimetric analysis was carried out to study the thermal stability of the resulting organo-magadiites. The intercalated surfactants started to decompose at 200 °C, with a mass loss percentage of 8% to 25%, depending on the initial loading of the surfactant, and was accompanied by a decrease of the basal spacing from 3.16 nm to 2.51 nm, as deduced from the in situ X-ray diffraction studies. At temperatures below 220 °C, an expansion of the basal spacing from 3.15 to 3.34 nm occurred. These materials were used as a removal agent for the anionic dye eosin. The maximum amount of the dye removed was related to the organic cation content and to the initial concentration of eosin, with an improvement from 2.5 mg/g to 80.65 mg/g. This value decreased when the organo-magadiite was preheated at temperatures above 200 °C. The regeneration tests indicated that an 85% removal efficiency was maintained after six cycles of use for the organo-magadiite using Ci of 200 mg/L

Physical and Thermal Characterizations of Newly Synthesized Liquid Crystals Based on Benzotrifluoride Moiety

The mesomorphic stability and optical activity of new group-based benzotrifluoride liquid crystals, (E)-4-(((4-(trifluoromethyl) phenyl) imino) methyl) phenyl 4-(alkyloxy)benzoate, or In, were investigated. The end of the molecules connected to the benzotrifluoride moiety and the end of the phenylazo benzoate moiety have terminal alkoxy groups which can range in chain length from 6 to 12 carbons. The synthesized compounds’ molecular structures were verified using FT-IR, 1H NMR, mass spectroscopy, and elemental analysis. Mesomorphic characteristics were verified using differential scanning calorimetry (DSC) and a polarized optical microscope (POM). All of the homologous series that have been developed display great thermal stability across a broad temperature range. Density functional theory (DFT) determined the examined compounds’ geometrical and thermal properties. The findings showed that every compound is entirely planar. Additionally, by using the DFT approach, it was possible to link the experimentally found values of the investigated compounds’ investigated compounds’ mesophase thermal stability, mesophase temperature ranges, and mesophase type to the predicted quantum chemical parameters