636 research outputs found
Effect of Ankaferd Blood Stopper on Early Bone Tissue Healing in Extraction Sockets: An Experimental In vivo Study
Purpose: To investigate the effect of Ankaferd blood stopper (ABS) on early bone healing of extraction sockets in rats.Method: Twenty-eight male Wistar rats were divided into four groups. The maxillary right first molar tooth of the rats was extracted under general anesthesia. Two groups (C-1, n = 6 and C-2, n = 6) received saline solutions in the extraction sockets immediately and one day after the extraction, respectively, while two groups (A-1, n = 8 and A-2, n = 8) received ABS. The rats in A-1 and C-1 groups were sacrificed after 7 days of post-extraction while the rats in A-2 and C-2 groups were sacrificed after 28 days. Bone samples were taken from the maxillas, and tissues were prepared for histopathological analysis. Osteoid tissue (OT), mineralized bone tissue (MT), remaining area (RA), and inflammatory cell infiltration (ICI) were determined. The histomorphometric results were analyzed statistically using analysis of variance (ANOVA).Results Osteoid formation was highest in C-1 group (39.71 ± 9.68, p < 0.05). Differences in OT among other groups were not significant (p > 0.05). MT was higher in C-2 group (47.73 ± 12.15) than in other groups (p < 0.05). RA was highest in C-1 group (59.95 ± 12.75). ICI was significantly lower in control (C1 and C-2) groups than in ABS (A-1 and A-2) groups (p < 0.05).Conclusion: ABS administered topically to extraction sockets immediately after extraction has no effect on bone healing; in fact, ABS increases inflammation in vivo
Stability of black carrot anthocyanins in the turkish delight (LOKUM) during storage
In this research, traditional Turkish delight (lokum) was colored with black carrot juice concentrate, and the variations in anthocyanin content, during storage at different temperatures (12, 20 and 30C) for 5-month periods, were observed by spectrophotometer and high-performance liquid chromatography. Analysis of kinetic data suggested a first-order reaction for the degradation of black carrot anthocyanins in Turkish delight. Degradation rates of anthocyanins of black carrot increased with increasing temperature. It was determined that the degradation rate of black carrot anthocyanins during the storage period at 12C increased faster than that of the other temperatures (20 and 30C). The k values for 12, 20 and 30C were found to be 6.91 × 10 -3, 4.21 × 10 -3and 9.21 × 10 -3/day, respectively. Effects of pH on the thermal stability of black carrot anthocyanins were also determined. Results showed that the stability of anthocyanins decreased as the pH value increased. Increase in pH values correlated well with the decrease in anthocyanin content of the samples during storage. In all of the samples, redness (a*) decreased during the storage at all temperatures; however, lightness (L*) increased. PRACTICAL APPLICATIONS Most of commercial anthocyanins used as a colorant in foods are obtained from fruits or vegetables such as: red grape, elderberry, blackcurrant, blackberry, raspberry, black chokeberry, red cabbage, black carrot, purple corn, red radish and purple sweet potato. Turkish delight (lokum), one of the most popular traditional food products in Turkey, is a famous Turkish desert known all over the world. Lokum is produced by using sugar, water, starch, citric acid, aromatic compounds, dried fruits and natural colorant. The color of foods, which is one of the initial properties noticed in foods, is one of the most important quality parameters affecting consumers. Because of consumer anxiety over the safety of synthetic food colorants, the demand for natural food colorants has increased. Particularly, there is an increasing request for natural red food colorants as alternatives to the most commonly used synthetic red colorant. Therefore, the availability and the suitability of black carrot juice concentrate as a natural colorant instead of synthetic colorants which are considered to have some negative properties for human health was investigated by this work. © 2009 Wiley Periodicals, Inc
Recommended from our members
Benchmarking of Different Powder-Bed Metal Fusion Processes for Machine Selection in Additive Manufacturing
In the last decade, additive manufacturing has gained significant interest for direct part
production and started to change the way companies manufacture products; even in very
demanding sectors like aerospace. The biggest challenge for a wider industrial acceptance still
stands as the need for more reliable, repeatable and precise machines for additive manufacturing.
This paper presents a comprehensive benchmarking study for the selection of an additive
manufacturing machine for powder-bed metal fusion process, i.e. Selective Laser Melting or
Direct Metal Laser Sintering or Laser Cusing. Four different machine vendors for the same
technology to be employed for aeroengine part manufacturing using Inconel 625 powder have
been involved for comparing different machine specifications. Many aspects such as dimensional
accuracy, surface quality, need of support structures, density, hardness and process limits
(minimum wall thickness, overhang surfaces, inclinations and curvatures, etc.) are addressed in
the paper. The state-of-the-art in machines for powder-bed metal fusion process is presented
aiming at understanding the current limitations of the technology available today.Mechanical Engineerin
Polypyrrole grafts with poly[(methyl methacrylate)-CO-(2-(N-pyrrolyl)ethyl methacrylate)]
Cataloged from PDF version of article.Conducting polymer grafts of pyrrole and poly[(methyl methacrylate)-co-(2-
(N-pyrrolyl) ethyl methacrylate)] containing 0.7% PEMA units were prepared
by potentiostatic anodic polymerization of pyrrole in different electrolytic
media. Grafting between copolymer and pyrrole was achieved in media where
tetrabutylammonium fluoroborate and sodium perchlorate were used as the
supporting electrolytes. Characterizations were made by using IT-IR, DSC,
TGA, SEM, CV, and elemental analysis. The conductivities of the resultant
polymers seemed to be in the order of pure polypyrrole prepared under the
same conditions. Copyright o 1997 Elsevier Scienc
Brieskorn manifolds as contact branched covers of spheres
We show that Brieskorn manifolds with their standard contact structures are
contact branched coverings of spheres. This covering maps a contact open book
decomposition of the Brieskorn manifold onto a Milnor open book of the sphere.Comment: 8 pages, 1 figur
Constructions of generalized complex structures in dimension four
Four-manifold theory is employed to study the existence of (twisted)
generalized complex structures. It is shown that there exist (twisted)
generalized complex structures that have more than one type change loci. In an
example-driven fashion, (twisted) generalized complex structures are
constructed on a myriad of four-manifolds, both simply and non-simply
connected, which are neither complex nor symplectic
Measurement of carrier envelope offset frequency for a 10 GHz etalon-stabilized semiconductor optical frequency comb
We report Carrier Envelope Offset (CEO) frequency measurements of a 10 GHz harmonically mode-locked, Fabry-Perot etalon-stabilized, semiconductor optical frequency comb source. A modified multi-heterodyne mixing technique with a reference frequency comb was utilized for the measurement. Also, preliminary results from an attempt at f-2f self-referencing measurement are presented. The CEO frequency was found to be similar to 1.47 GHz for the particular etalon that was used
A novel algorithm for dynamic student profile adaptation based on learning styles
The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.E-learning recommendation systems are used to enhance student performance and knowledge by providing tailor- made services based on the students’ preferences and learning styles, which are typically stored in student profiles. For such systems to remain effective, the profiles need to be able to adapt and reflect the students’ changing behaviour. In this paper, we introduce new algorithms that are designed to track student learning behaviour patterns, capture their learning styles, and maintain dynamic student profiles within a recommendation system (RS). This paper also proposes a new method to extract features that characterise student behaviour to identify students’ learning styles with respect to the Felder-Silverman learning style model (FSLSM). In order to test the efficiency of the proposed algorithm, we present a series of experiments that use a dataset of real students to demonstrate how our proposed algorithm can effectively model a dynamic student profile and adapt to different student learning behaviour. The results revealed that the students could effectively increase their learning efficiency and quality for the courses when the learning styles are identified, and proper recommendations are made by using our method
Influencia de un injerto en el perfil de ácidos grasos y algunas propiedades fisicoquímicas de la semilla y el aceite de semillas de sandía
This study aimed to investigate the effects of grafting on the fatty acid profile and some physicochemical properties of watermelon seed and seed oil. The ‘Crimson Tide’ cultivar was used as the scion while two wild watermelon (Citrullus lanatus var. citroides (A1 and A2)), one Lagenaria siceraria (A3) and one Cucurbita maxima Duchesne x Cucurbita moschata Duchesne (A4) were used as rootstocks. The use of rootstock significantly influenced the fatty acid profile and the physical parameters of seeds and seed oils. The highest linoleic acid ratio was found in the seed oil from A1 and A2, the oil from A3 had the highest oleic acid ratio. The results showed that the content and acid value in seed oils were improved, and that total phenolic compounds and antioxidant activity of both seed and oil were decreased by grafting. Wild rootstocks can be used in watermelon cultivation to obtain a watermelon seed which is rich in linoleic acid.El objetivo de este estudio fue investigar los efectos del injerto en el perfil de ácidos grasos y algunas propiedades fisicoquímicas de la semilla y el aceite de semillas de sandía. El cultivar ‘Crimson Tide’ se utilizó como vástago, mientras que dos sandías silvestres (Citrullus lanatus var. Citroides (A1 y A2)), una Lagenaria siceraria (A3) y una Cucurbita maxima Duchesne x Cucurbita moschata Duchesne (A4) se utilizaron como portainjertos. El uso de portainjertos influyó significativamente en el perfil de ácidos grasos y los parámetros físicos de semillas y aceites de semillas. La proporción de ácido linoleico más alta se encontró en el aceite de semillas de A1 y A2, el aceite de A3 tuvo la proporción de ácido oleico más alta. Los resultados mostraron que el contenido de aceite y el índice de acidez mejoró y los compuestos fenólicos totales y la actividad antioxidante tanto de la semilla como del aceite se redujeron mediante el injerto. Para obtener un aceite de semillas de sandía rico en ácido linoleico, se pueden utilizar portainjertos silvestres en el cultivo de sandía
Recommended from our members
A single shot coherent Ising machine based on a network of injection-locked multicore fiber lasers
Combinatorial optimization problems over large and complex systems have many applications in social networks, image processing, artificial intelligence, computational biology and a variety of other areas. Finding the optimized solution for such problems in general are usually in non-deterministic polynomial time (NP)-hard complexity class. Some NP-hard problems can be easily mapped to minimizing an lsing energy function. Here, we present an analog all-optical implementation of a coherent lsing machine (CIM) based on a network of injection-locked multicore fiber (MCF) lasers. The Zeeman terms and the mutual couplings appearing in the Ising Hamiltonians are implemented using spatial light modulators (SLMs). As a proof-of-principle, we demonstrate the use of optics to solve several Ising Hamiltonians for up to thirteen nodes. Overall, the average accuracy of the CIM to find the ground state energy was similar to 90% for 120 trials. The fundamental bottlenecks for the scalability and programmability of the presented CIM are discussed as well.Office of Naval Research (ONR) MURI program on Optical Computing [N00014-14-1-0505]; NSF ERC CIAN [EEC-0812072]; State of Arizona TRIFOpen access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
- …