770 research outputs found
Characterisation and antimicrobial resistance of sepsis pathogens in neonates born in tertiary care centres in Delhi,India: a cohort study
Background Sepsis is one of the most common causes of neonatal deaths globally. Most sepsis-related deaths occur in
low-income and middle-income countries, where the epidemiology of neonatal sepsis remains poorly understood.
Most of these countries lack proper surveillance networks, hampering accurate assessment of the burden of sepsis,
implementation of preventive measures, and investment in research. We report results of neonates born in hospital
from a multicentre collaboration on neonatal sepsis.
Methods In this cohort study, dedicated research teams prospectively followed up neonates born in one of three
tertiary care centres in Delhi, India (Vardhaman Mahavir Medical College, Maulana Azad Medical College, and All
India Institute of Medical Sciences [coordinating centre]) and subsequently admitted to the intensive care unit.
Neonates were followed up daily until discharge or death. On clinical suspicion, neonates underwent sepsis work-up
including blood cultures. The isolated organisms were identifi ed and tested for antimicrobial susceptibility. We
defi ned Gram-negative isolates resistant to any three of fi ve antibiotic classes (extended-spectrum cephalosporins,
carbapenems, aminoglycosides, fl uoroquinolones, and piperacillin-tazobactam) as multidrug resistant.
Findings 13 530 neonates of 88 636 livebirths were enrolled between July 18, 2011, and Feb 28, 2014. The incidence of
total sepsis was 14·3% (95% CI 13·8–14·9) and of culture-positive sepsis was 6·2% (5·8–6·6). Nearly two-thirds of
total episodes occurred at or before 72 h of life (defi ned as early onset; 1351 [83%] of 1980). Two-thirds (645 [64%])
of 1005 isolates were Gram-negative including, Acinetobacter spp (22%), Klebsiella spp (17%), and Escherichia coli (14%).
The pathogen mix in early-onset sepsis did not diff er from that of late-onset sepsis (ie, after 72 h). High rates of
multidrug resistance were observed in Acinetobacter spp (181/222, 82%), Klebsiella spp (91/169, 54%), and Escherichia coli
(52/137, 38%) isolates. Meticillin resistance prevailed in 61% (85/140) of coagulase-negative staphylococci and 38%
(43/114) of Staphylococcus aureus isolates. Nearly a quarter of the deaths were attributable to sepsis. The populationattributable
risks of mortality were 8·6% in culture-negative sepsis, 15·7% in culture-positive sepsis by multidrugresistant
organisms, and 12·0% in culture-positive sepsis by non-multidrug-resistant organisms.
Interpretation The high incidence of sepsis and alarming degree of antimicrobial resistance among pathogens in
neonates born in tertiary hospitals underscore the need to understand the pathogenesis of early-onset sepsis and to
devise measures to prevent it in low-income and middle-income countries
Accented Models: Evaluating their effectiveness in Building Energy Simulation
This report examines the effectiveness of the accented modeling method for building energy simulation. The traditional full-zone modeling method is too time consuming and in some cases unnecessary, so a more efficient building modeling method – accented modeling is introduced. The purpose of this research is to analyze if, and under what conditions, an accented building model is an effective representation of the actual building. By using DesignBuilder and EnergyPlus as software packages for model development and simulation, two building models for the Lofts on the Washington University campus in St. Louis, MO were created for comparison—a full-zone model and an accented model. This report first examines the accuracy of the full-zone model, and then, by comparing the accurate full-zone model to the accented model, shows that the accented modeling method is effective in this case
Aerodynamic Study of Stability and Control of Straight Flying-Wings
The bell-spanload, or bell-shaped lift distribution, gives proverse yaw for outer aileron deflections, a key factor in controlling a tailless vehicle. Study of bell-spanload applications have been limited to swept wings with elevon control schemes, relying on a well-tuned proverse yaw response for a differential elevon deflection. In examining unswept wings, symmetric outer control surface deflections have minimal associated pitching moment, allowing their use in adjusting the lift distribution to optimize for a wide range of flight conditions. Lateral-directional control of bell-spanloads can be improved by the use of an additional set of ailerons inboard of the mid-span vortices. The inboard ailerons provide traditional adverse yaw which serves as a linearly independent control vector relative to the existing proverse yaw outer surfaces; the two vectors are sufficient to define a parallelogram-shaped controllable region in the roll-yaw control space
Numerical Simulation of Chemical Looping and Calcium Looping Combustion Processes for Carbon Capture
Efficient carbon capture and storage (CCS) technologies are needed to address the rising carbon emissions from power generation using fossil fuels that have been linked to global warming and climate change. Chemical looping combustion (CLC) is one such technology that has shown great promise due to its potential for high-purity carbon capture at low cost. Another CCS technology that has garnered interest in recent years is calcium looping (CaL), which utilizes calcium oxide and the carbonation-calcination equilibrium reactions to capture CO2 from the flue stream of fossil fuel power plants. Computational fluid dynamics (CFD) simulations of two CLC reactors are presented in this chapter, along with system level simulations of CaL for postcombustion carbon capture. CFD simulation of a CLC reactor based on a dual fluidized bed reactor is developed using the Eulerian approach to characterize the chemical reactions in the system. The solid phase consists of a Fe-based oxygen carrier while the gaseous fuel used is syngas. Later, the detailed hydrodynamics in a CLC system designed for solid coal fuel is presented based on a cold flow experimental setup at National Energy Technology Laboratory using the Lagrangian particle-tracking method. The process simulation of CaL using Aspen Plus shows an increasing marginal energy penalty associated with an increase in the CO2 capture efficiency, which suggests a limit on the maximum carbon capture efficiency in practical applications of CaL before the energy penalty becomes too large
Computational Fluid Dynamics Study on the Effect of Using an Under-Tray Addition to Motorsport
The aim of this study is to study the effect of deploying an under-tray to a Formula Society of Automotive Engineers (FSAE) racecar for the Washington University FSAE racing team (WashU Racing) through Computational Fluid Dynamics (CFD). The under-tray geometry was developed to cover the bottom of an FSAE racecar by members of the WashU Racing team (a college FSAE team). The under-tray was added to the existing geometry of the Formula racecar; a mesh around it was then generated using the mesh generator in ANSYS and CFD simulations were performed using ANSYS Fluent to determine lift and drag values for the car in the presence of under-tray. Processing of numerical data was done using ANSYS EnSight. The center of pressure of the car was found analytically. All physical quantities obtained with inclusion of under-tray were compared to those obtained for the model of the car without the under-tray. It was found that under-tray slightly increases the lift coefficient and significantly decreases the drag coefficient. The study shows that the inclusion of an under-tray would be a worthwhile addition to the FSAE car
Aerodynamics of Gurney Flaps on a Wing in Ground Effect
My independent study will focus on the Computational Fluid Dynamics (CFD) simulation of the ground effect of a Gurney flap on its lift enhancement. The commercial flow solver ANSYS ICEM will be used for generating the mesh and ANSYS FLUENT will be employed to solve the airfoil lift and drag coefficient under low speed turbulent flow conditions. The boundary conditions for the CFD models will be implemented such that they correspond to the experimental conditions. The CFD simulation results will be compared to the experimental data. It is expected that the successful simulation results should compare well with the experimental data provided by the NF-3 wind tunnel
Computational Fluid Dynamics Analysis of High Lift, Inverted Airfoils in Ground Effect
Formula SAE vehicles are formula styled (open-wheeled and open cockpit) racecars that are designed to race on an autocross circuit. Highly competitive vehicles in the competition implement aerodynamic devices, which generate negative lift for the vehicle. This negative lift, or downforce, increases the amount of traction between the racecar’s tires and the ground that ultimately allows drivers to turn at faster speeds. Commonly used aerodynamic devices are a front and rear wing; the wing cross sections are defined by configurations of multiple 2D airfoils. This paper focuses on the systematic design of a Formula SAE specific front wing through the comparisons of high lift, inverted airfoils, in ground effect in order to maximize the negative lift coefficient. Five selected high lift, single element airfoils are iterated through multiple angles of attack and the three superior airfoils are iterated through a second study of height off the ground. A third study begins to look at combining the single airfoils into a two element airfoil configuration to further increase negative lift generation
Computational Fluid Dynamics Analysis of High Lift, Single Element, Inverted Airfoils in Ground Effect for an FSAE Car Front Wing
- …