850 research outputs found
Proposing a life cycle land use impact calculation methodology
The Life Cycle Assessment (LCA) community is yet to come to a consensus on a methodology to incorporate land use in LCA, still struggling with what exactly should be assessed and which indicators should be used. To solve this problem we start from concepts and models describing how ecosystems function and sustain, in order to understand how land use affects them. Earlier our research group presented a methodology based on the ecosystem exergy concept. This concept as based on the hypothesis that ecosystems develop towards more effective degradation of exergy fluxes passing through the system and is derived from two axioms: the principles of (i) maximum exergy storage and the (ii) maximum exergy dissipation. This concept aiming at the area of protection natural environment is different from conventional exergy analysis in LCA focusing on natural resources. To prevent confusion, the ecosystem exergy concept is further referred to as the MAximum Storage and Dissipation concept (MASD concept). In this paper we present how this concept identifies end-point impacts, mid-point impacts and mid-point indicators. The identified end-point impacts to assess are Ecosystem Structural Quality (ESQ) and Ecosystem Functional Quality (EFQ). In order to quantify these end-point impacts a dynamic multi-indicator set is proposed for quantifying the mid-point impacts on soil fertility, biodiversity and biomass production (quantifying the ESQ) and soil structure, vegetation structure and on-site water balance (quantifying the EFQ). Further we present an impact calculation method suitable for different environmental assessment tools and demonstrate the incorporation of the methodology in LCA
Use of inadequate data and methodological errors lead to a dramatic overestimation of the water footprint of Jatropha curcas
In their recent article, Gerbens-Leenes et al. (1) calculated the water footprint (WF, the amount of water required to produce 1 GJ of energy) of several bioenergy crops. One of the most remarkable findings of this study was the very high water footprint of this species, which has serious management consequences. 

However, these results are in apparent contrast with recent findings on this species. We present evidence that several errors were made by the authors when calculating the water footprint of jatropha, which has lead to a dramatic overestimation. These errors include weaknesses concerning the data used for the calculation of the water footprint, as well as flaws in the calculation method, as we demonstrate in the letter. Based on peer-reviewed data, we furthermore provide a more correct, still rough, first estimate for the water footprint of this species, which would place it amongst the more water efficient bioenergy crops. 


Design and testing of pistons and cups for large hydrostatic pumps and motors
A new transmission is being designed for a next generation of large, offshore wind turbines, based on floating cup pumps and motors. The machines have a fixed displacement of around five liter per revolution. The objective of this study is to design, manufacture and test the pistons and cups of these machines. To this end, a new test bench has been designed and build, to measure the leakage and friction of the pistons up to a pressure level of 350 bar. Several sets of pistons and cups have been tested against a reference set which was proven to have very little friction at rated and peak operating conditions. The leakage between the pistons and cups was measured at different piston positions at stationary conditions. The friction between the piston and the cup has been measured continuously. From the tests it can be concluded that the friction force is below 0,01% of the piston force. The leakage losses are less than 0,5% of the total effective flow output
A Multi-Agent Mah Jong Playing System: Towards Real-Time Recognition of Graphic Units in Graphic Representations
In architectural design, sketching is an important means to explore the first conceptual developments in the design process. It is necessary to understand the conventions of depiction and encoding in sketches and drawings if we want to support the architect in the sketching activity. The theory of graphic units provides a comprehensive list of conventions of depiction and encoding that are widely used among architects. These graphic units form useful building blocks to understand design drawings. We investigate whether it is possible to build a system that can recognize graphic units. The technology we are looking at is multi-agent systems. It was chosen for the following reasons: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. Currently there is no general approach or technology available for multi-agent systems. Therefore, in our research we first set out to make such a multi-agent system. In order to keep the complexity low, we first aim to make a system that can do something simple: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) a dynamically changing environment; and (4) search activity for more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems, followed by a description of the multi-agent framework and its implementation. A number of systems that can play Mah Jong at various degrees of competence and accordingly degrees of complexity of multi-agent system, are distinguished. Finally, the paper demonstrates how the findings are informative for a system that can recognize graphic units
Proposing a life cycle land use impact calculation methodology
The Life Cycle Assessment (LCA) community is yet to come to a consensus on a methodology to incorporate land use in LCA. Earlier our research group presented a methodology based on the ecosystem exergy concept. The ecosystem exergy concept suggests that ecosystems develop towards more effective degradation of energy fluxes passing through the system. The concept is argued to be derivable from two axioms: the principles of (i) maximum exergy storage and the (ii) maximum exergy dissipation. In this paper we present a methodology to assess impacts of human induced land use occupation, in which we make a difference between functional and structural land use impacts. The methodology follows a dynamic multi-indicator approach looking at mid-point impacts on soil fertility, soil structure, biomass production, vegetation structure, on-site water balance and biodiversity. The impact scores are calculated as a relative difference with a reference system. We propose to calculate the impact by calculating the land quality change between the former and the actual land use relative to the quality of the potential natural vegetation. Impact scores are then aggregated, as endpoint impacts, in (i) structural land use impact (exergy storage capacity) and (ii) functional land use impact (exergy dissipation capacity). For aggregation of the relative mid-point impact scores no characterization factor is used. In order to fit this impact calculation in the LCA framework the end-point impact scores are multiplied by a LCA component, a component that enables us to report the impact per functional unit
AVOCAAD - A First Step Towards Distance Learning
In the industrial world knowledge is developed very fast. As most countries are depending on employees with a high level of knowledge and skills the term "Life Long Learning" has been formulated and the concept is more and more accepted. Institutions of higher education are more and more involved in creating supplementary education more independent of time and place. Distance learning was originally carried out by ordinary mail, which was slow but might then have been the only solution for people in remote places. With the Internet and e-mail the distance-learning concept has got a far better tool, for instance better interaction facilities. Architects and engineers in practise are deeply involved in solving the problems of the present projects. Education which is independent of time and place must be of great interest to both parties. The AVOCAAD project has created an education model for students to meet the possibilities of CAAD. The education model can be used in a curriculum at a school as well as for distance learning. Among the possible experiences from it, the one concerning distance learning might be the most important future application of the system in architectural education. This paper sketches the pedagogical background and gives examples from other areas of knowledge, where distance learning is already in use. We will put the question how the AVOCAAD concept meets the experiences from distance learning
Knowledge-based systems programming for knowledge intensive teaching
Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered as a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. In order to become acquainted with both building type andprogramming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis andAutoLlSP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form offrames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type
The Warwick Hip Trauma Evaluation Two - an abridged protocol for the WHiTE Two Study AN EMBEDDED RANDOMISED TRIAL COMPARING THE DUAL-MOBILITY WITH POLYETHYLENE CUPS IN HIP ARTHROPLASTY FOR FRACTURE
Fractures of the proximal femur are one of the greatest challenges facing the medical community, constituting a heavy socioeconomic burden worldwide. Controversy exists regarding the optimal treatment for independent patients with displaced intracapsular fractures of the proximal femur. The recognised alternatives are hemiarthroplasty and total hip replacement. At present there is no established standard of care, with both types of arthroplasty being used in many centres. The principal advantages of total hip replacement are a functional benefit over hemiarthroplasty and a reduced risk of revision surgery. The principal criticism is the increased risk of dislocation. We believe that an alternative acetabular component may reduce the risk of dislocation but still provide the functional benefit of total hip replacement in these patients. We therefore propose to investigate the dislocation risk of a dual-mobility acetabular component compared with standard polyethylene component in total hip replacement for independent patients with displaced intracapsular fractures of the proximal femur within the framework of the larger WHiTE (Warwick Hip Trauma Evaluation) Comprehensive Cohort Study. Cite this article: Bone Joint Res 2013;2:210–13
The costs and benefits of estimating T-1 of tissue alongside cerebral blood flow and arterial transit time in pseudo-continuous arterial spin labeling
Multi-post-labeling-delay pseudo-continuous arterial spin labeling (multi-PLD PCASL) allows for absolute quantification of the cerebral blood flow (CBF) as well as the arterial transit time (ATT). Estimating these perfusion parameters from multi-PLD PCASL data is a non-linear inverse problem, which is commonly tackled by fitting the single-compartment model (SCM) for PCASL, with CBF and ATT as free parameters. The longitudinal relaxation time of tissue T-1t is an important parameter in this model, as it governs the decay of the perfusion signal entirely upon entry in the imaging voxel. Conventionally, T-1t is fixed to a population average. This approach can cause CBF quantification errors, as T-1t can vary significantly inter- and intra-subject. This study compares the impact on CBF quantification, in terms of accuracy and precision, of either fixing T-1t, the conventional approach, or estimating it alongside CBF and ATT. It is shown that the conventional approach can cause a significant bias in CBF. Indeed, simulation experiments reveal that if T-1t is fixed to a value that is 10% off its true value, this may already result in a bias of 15% in CBF. On the other hand, as is shown by both simulation and real data experiments, estimating T-1t along with CBF and ATT results in a loss of CBF precision of the same order, even if the experiment design is optimized for the latter estimation problem. Simulation experiments suggest that an optimal balance between accuracy and precision of CBF estimation from multi-PLD PCASL data can be expected when using the two-parameter estimator with a fixed T-1t value between population averages of T-1t and the longitudinal relaxation time of blood T-1b
- …